I always like to see this stuff, so I'm guessing maybe this might be
useful to someone else. Here's my dmesg from the Mobilepro 880. This
is a 2.0 GENERIC kernel straight from the install package. The only
hardware I added was a 64 meg CF card, and a 256 meg USB drive which
root lives on (for now):

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 2.0 (GENERIC) #0: Wed Dec  1 09:50:02 UTC 2004
 builds@build:/big/builds/ab/netbsd-2-0-RELEASE/hpcmips/200411300000Z-obj/big/builds/ab/netbsd-2-0-RELEASE/src/sys/arch/hpcmips/compile/GENERIC
NEC MobilePro 880 (NEC VR4121 rev1.2 168.521MHz)
total memory = 32768 KB
avail memory = 28268 KB
mainbus0 (root)
cpu0 at mainbus0: NEC VR4100 CPU (0xc60) Rev. 6.0 with software
emulated floating point
cpu0: 16KB/16B direct-mapped L1 Instruction cache, 32 TLB entries
cpu0: 8KB/16B direct-mapped write-back L1 Data cache
vr4102ip0 at mainbus0
vrbcu0 at vr4102ip0 addr 0x0b000000-001f
vrbcu0: CPU 168.521MHz, bus 28.086MHz, ram 56.173MHz
vrcmu0 at vr4102ip0 addr 0x0b000060-007f
vrgiu0 at vr4102ip0 addr 0x0b000100-011f
hpcioman9 at vrgiu0
hpcin0 at hpcioman9 iochip vrgiu0, port 13, type 5, id 256, interrupt level low
button1 at vrgiu0 port=3 id=13 active=high sense=edge
pwctl0 at vrgiu0 port=46 id=0 on=1
vrdmaau0 at vr4102ip0 addr 0x0b000020-0037
vrdcu0 at vr4102ip0 addr 0x0b000040-004b
vrrtc0 at vr4102ip0 addr 0x0b0000c0-00df
vrkiu0 at vr4102ip0 addr 0x0b000180-019f
hpckbd0 at vrkiu0
wskbd0 at hpckbd0: console keyboard
vrpmu0 at vr4102ip0 addr 0x0b0000a0-00bf
vrdsu0 at vr4102ip0 addr 0x0b0000e0-00e7
vrled0 at vr4102ip0 addr 0x0b000240-024f
vrpiu0 at vr4102ip0 addr 0x0b000120-013f, 0x0b0002a0-02bf
wsmouse0 at vrpiu0 mux 0
mqvideo0 at vr4102ip0 addr 0x0a000000-7fffff: MQ200 Rev.00 video
controller, console
mqvideo0: framebuffer address: 0xaa0ea600
  PLL1: 49.989MHz(0x0eb22a2a, 12.288MHzx179/ 44)
  PLL2: disable
  PLL3: 34.368MHz(0x00b20730, 12.288MHzx179/ 64)
   MEM: 49.989MHz(PLL1)
    GE: 34.368MHz(PLL3)
   GC1: disable
   GC2: 34.368MHz(PLL3/1/1), FP
hpcfb0 at mqvideo0: 800x600 pixels, 65536 colors, 100x60 chars
wsdisplay0 at hpcfb0 kbdmux 1: console (std, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
vrc4172pci0 at vr4102ip0 addr 0x0aff0cf8-0cff
pci0 at vrc4172pci0 bus 0
pci0: i/o space, memory space enabled, rd/line ok
NEC product 0x0000 (host bridge, revision 0x03) at pci0 dev 0 function
0 not configured
ohci0 at pci0 dev 0 function 1: NEC product 0x0000 (rev. 0x00)
ohci0: interrupting at pciintr 0:0:1
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
vrc4172pwm0 at vr4102ip0 addr 0x15003880-3885
vraiu0 at vr4102ip0 addr 0x0b000160-017f
audio0 at vraiu0: half duplex
vrisab0 at vrgiu0: ISA port 0x14000000-0x18000000 mem 0x10000000-0x14000000
isa0 at vrisab0
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0x70000-0x73fff irq 589827
pcic0: controller 0 (Ricoh RF5C396) has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
btnmgr0 at mainbus0
wskbd1 at btnmgr0 mux 1
wskbd1: connecting to wsdisplay0
hpcapm0 at mainbus0: pseudo power management module
apmdev0 at hpcapm0: Power Management spec V1.2
pcic0: using irq 589827 for socket events
hpcapm: battery life 80%
hpcapm: battery state high
wdc1 at pcmcia0 function 0umass0 at uhub0 port 1 configuration 1 interface 0
umass0: LEXAR MEDIA JUMPDRIVE, rev 2.00/30.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <LEXAR, JUMPDRIVE, 1000> disk removable
sd0: 247 MB, 984 cyl, 16 head, 63 sec, 512 bytes/sect x 506880 sectors
pcic0: port 0x14000400-0x1400040f

atabus0 at wdc1 channel 0
pcmcia0: card irq 3
wd0 at atabus0 drive 0: <SanDisk SDCFB-64>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 62720 KB, 490 cyl, 8 head, 32 sec, 512 bytes/sect x 125440 sectors
boot device: wd0
root on wd0a dumps on wd0b
pcmcia0: card irq 3
pcmcia0: card irq 3
pcmcia0: card irq 3
pcmcia0: card irq 3
no file system for wd0 (dev 0x100)
cannot mount root, error = 79
root device (default wd0a): sd0a
dump device (default sd0b): 
file system (default generic): 
root on sd0a dumps on sd0b
WARNING: preposterous clock chip time
 -- CHECK AND RESET THE DATE!
root file system type: ffs
init path (default /sbin/init): 
init: trying /sbin/init