Thanks Matthew! hmmm ... so when I get into the installboot, I run "patch < 
hpcmips.diff" in the src directory?

Snappy!

"Matthew Orgass" <darkstar@city-net.com> wrote in message 
news:Pine.BSF.4.51.0507300719060.9338@vegeta.city-net.com...
>
>  Unfortunately, you need to compile a new kernel.  The NetBSD guide has
> some information about this.  Patch itself is just run "patch <
> hpcmips.diff" in the src directory.  I put a hpckbd.diff file in the same
> directory as below for the keyboard diffs, since they can be difficult to
> grab from the web site due to html mangling.  For the main clio-1050 fix,
> the easiest way is to edit sys/arch/hpcmips/conf/VR41XX (or copy it to
> make a custom config) and change the isaportoffset value for vrisab3 for
> the SHARP_TRIPAD and VADEM_CLIO_C to 0x0.
>
> Matthew Orgass
> darkstar@city-net.com
>
> On 2005-07-29 direct2system@yahoo.com wrote:
>
>> Hi Matthew,
>>
>> Thanks! A Newbie question ... how do I apply the patches? :o
>>
>> Snappy!
>>
>> "Matthew Orgass" <darkstar@city-net.com> wrote in message
>> news:Pine.BSF.4.51.0507171436350.70727@vegeta.city-net.com...
>> > On 2005-07-15 direct2system@yahoo.com wrote:
>> >
>> >> I tried to install NetBSD 2.0.2 with a Kingston 5GB Datapak pccard 
>> >> drive
>> >> on
>> >> CLIO-1050 but after the install boot started, the sysinstall app says 
>> >> it
>> >> cannot find any harddrive to install to.
>> >
>> > You need to apply some patches to the kernel for this to work:
>> > port-hpcmips/28228 for clio-1050 support and update vr.c to later 
>> > revision
>> > or apply the patches here:
>> > http://www.city-net.com/~darkstar/netbsd/hpcmips.diff
>> >
>> >  There is also port-hpcmips/28383 to support PgUp, etc. via Fn key and
>> > allow screen switching.
>> >
>> > Matthew Orgass
>> > darkstar@city-net.com
>> >
>> >
>>
>>
>>
>