Subject: Sharp-HC7000 [probably equivalent to Telios AJ1] won't shutdown X neatly and some "stop-gap" workarounds
To: None <port-hpcmips@netbsd.org>
From: Peter Kwan <peterkwan@yahoo.com>
List: port-hpcmips
Date: 02/06/2006 02:55:02
--0-2069241648-1139223302=:39668
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit
I finally manage to instal NetBSD/hpcmips on my Sharp HC 7000, which is probably a verison of Telios AJ1 using ftp install via a CF-lan card at the CF slot and a sandisk CF card 1GB at the pcmcia slot using a pcmcia adaptor. Everything apparently works fine except that X won't shutdown neatly. below is the dmesg file and some notes to shutdown the machine "properly" prior to getting further assistance/advice from readers of this mailing list. Thanks.
Peter KWAN
Hong Kong SAR, PRC
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Ship7k is the name of my machine, from Sharp 7000
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 3.0 (GENERIC) #0: Mon Dec 19 00:55:40 UTC 2005
riz@faith.netbsd.org:/home/builds/ab/netbsd-3-0-RELEASE/hpcmips/200512182024Z-obj/home/builds/ab/netbsd-3-0-RELEASE/src/sys/arch/hpcmips/compile/GENERIC
Sharp HC-AJ1 (Japanese) (TOSHIBA TMPR3922 rev. 1.6 129.00 MHz)
total memory = 25628 KB
total memory banks = 2
memory bank 0 = 0x00000000 7136KB(0x006f8000)
memory bank 1 = 0x006f8000 18492KB(0x0120f000)
avail memory = 17680 KB
mainbus0 (root)
cpu0 at mainbus0: Toshiba TX3922 CPU (0x2230) Rev. 3.0 with software emulated floating point
cpu0: 16KB/16B 2-way set-associative Instruction cache, 64 TLB entries
cpu0: 8KB/16B 2-way set-associative write-through Data cache
txsim0 at mainbus0
tx39icu0 at txsim0
tx39power0 at txsim0
tx39clock0 at txsim0
tx39io0 at txsim0
tx39sib0 at txsim0: 1.536 MHz
ucb0 at tx39sib0 slot 0: TOSHIBA TC35413F
ucbtp0 at ucb0:
wsmouse at ucbtp0 not configured
ucbsnd0 at ucb0: audio 3.692 kHz telecom 1.200 kHz
ucbio0 at ucb0
tx39biu0 at txsim0
tx39spi0 at txsim0
txioman0 at txsim0
tx39uart0 at txsim0
txcom0 at tx39uart0 slot 0
txcom1 at tx39uart0 slot 1
txcsbus1 at tx39biu0
teliosio0 at txcsbus1 regcs KUCS1 16bit 0+0xffffffff
tc5165buf0 at txcsbus1 iocs CS1 16bit 0+0x100: polling mode
hpckbd0 at tc5165buf0
wskbd0 at hpckbd0: console keyboard
plum0 at txcsbus1 regcs CS3 32bit 0+0xffffffff iocs MCS0 32bit 0+0xffffffff memcs MCS1 32bit 0+0xffffffff irq1 277(8:21): Plum2 #2
plumicu0 at plum0
plumpower0 at plum0
plumvideo0 at plum0: display mode: 8bpp
hpcfb0 at plumvideo0: 800x480 pixels, 256 colors, 100x48 chars
wsdisplay0 at hpcfb0 kbdmux 1: console (std, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
ohci0 at plum0
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
plumpcmcia0 at plum0
pcmcia0 at plumpcmcia0
wdc1 at pcmcia0 function 0: <SanDisk, SDP, 5/3 0.6>
wdc1: i/o mapped mode
atabus0 at wdc1 channel 0
pcmcia1 at plumpcmcia0
ne0 at pcmcia1 function 0: <CF, 10Base-Ethernet, 1.0, >
ne0: Ethernet address 00:10:60:f1:bd:ce
hpcioman1 at txioman0
hpcin0 at hpcioman1 iochip IO, port 7, type 4, id 16, interrupt edge [p]
hpcin1 at hpcioman1 iochip IO, port 8, type 4, id 17, interrupt edge [p]
hpcin2 at hpcioman1 iochip IO, port 6, type 0, id 4, interrupt edge [p]
hpcin3 at hpcioman1 iochip MFIO, port 27, type 2, id 32, interrupt edge [pn]
hpcin4 at hpcioman1 iochip MFIO, port 29, type 2, id 36, interrupt edge [pn]
hpcout0 at hpcioman1 iochip IO, port 4, type 3, id 26
btnmgr0 at mainbus0
wskbd1 at btnmgr0 mux 1
wskbd1: connecting to wsdisplay0
hpcapm0 at mainbus0: pseudo power management module
apmdev0 at hpcapm0: Power Management spec V1.2
wd0 at atabus0 drive 0: <SanDisk SDCFH-1024>
wd0: drive supports 4-sector PIO transfers, LBA addressing
wd0: 977 MB, 1986 cyl, 16 head, 63 sec, 512 bytes/sect x 2001888 sectors
wd0: drive supports PIO mode 4
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
* * * * * * * * * * * * * * * * * * * * * * * * * *
X WON'T SHUTDOWN NEATLY WITH THE FOLLOWING ERRORS
* * * * * * * * * * * * * * * * * * * * * * * * * *
/dev/ttyE0: 800x480 (800x480) (800bytes/line) 8bit offset=0
mouse: /dev/wsmouse (multiplexer)
keyboard:/dev/ttyE0 (RAW XT keyboard)
key repeat: 400/100 ms.
keymap: jp(jp106)
xauth: (argv):1: bad display name "ship7k.:0" in "remove" command
[1] + Done xterm -sb
ship7k: {4} keymap: jp(jp106)
could not init font path element /usr/X11R6/lib/X11/fonts/CID, removing from list!
ship7k: {4} Reading keyboard: Input/Output error /* probably due to my keying in ctrl+alt+backspace */
Fatal server error:
could not read keyboard
* * * * * * * * * * * * * * * * * * * * * * * * * *
BEFORE TRYING TO FIGURE OUT THE KEYMAP PROBLEM
* * * * * * * * * * * * * * * * * * * * * * * * * *
After X failed to exit neatly, a sample of the "new" keymap (N.B. some keys become inactive) and probably useful becomes
<+/=> --> return /* VERY USEFUL */
<ctrl Q> --> previous commands /* VERY USEFUL*/
<shift><6/^> --> & /* VERY USEFUL */
<_/-> --> clear screen
<3> --> ctrl D
<L> = }
<Q> = ;
ctrl-C gives "."
press {+/=} goes to shell [tcsh shell -- from 2.02 package]
* * * * * * * * * * * * * * * * * * * * * * * * * *
PROBABLY A GRACEFUL SHUTDOWN
* * * * * * * * * * * * * * * * * * * * * * * * * *
Key-in <ctrl><Q> gives previous command /* Telios AJ1/Ctrl Q */
Key-in <+/=> gives a "RETURN"
Thus <Q> <+> => previous command + return
I have previously key in
setenv DISPLAY 192.168.10.32:0 /* which is the ip for my SGI O2 machine */
xterm -sb &
So I have the display displayed on the SGI O2 machine, su to root and perform a normal shutdown of my SHARP HC 7000.
---------------------------------
Bring words and photos together (easily) with
PhotoMail - it's free and works with your Yahoo! Mail.
--0-2069241648-1139223302=:39668
Content-Type: text/html; charset=iso-8859-1
Content-Transfer-Encoding: 8bit
<div>I finally manage to instal NetBSD/hpcmips on my Sharp HC 7000, which is probably a verison of Telios AJ1 using ftp install via a CF-lan card at the CF slot and a sandisk CF card 1GB at the pcmcia slot using a pcmcia adaptor. Everything apparently works fine except that X won't shutdown neatly. below is the dmesg file and some notes to shutdown the machine "properly" prior to getting further assistance/advice from readers of this mailing list. Thanks.</div> <div> </div> <div>Peter KWAN</div> <div>Hong Kong SAR, PRC</div> <div> </div> <div>* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *</div> <div>Ship7k is the name of my machine, from Sharp 7000</div> <div>* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *</div> <div>Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005<BR> The NetBSD Foundation, Inc. All rights reserved.<BR>Copyr
ight (c)
1982, 1986, 1989, 1991, 1993<BR> The Regents of the University of California. All rights reserved.</div> <div>NetBSD 3.0 (GENERIC) #0: Mon Dec 19 00:55:40 UTC 2005<BR> <A href="mailto:riz@faith.netbsd.org:/home/builds/ab/netbsd-3-0-RELEASE/hpcmips/200512182024Z-obj/home/builds/ab/netbsd-3-0-RELEASE/src/sys/arch/hpcmips/compile/GENERIC">riz@faith.netbsd.org:/home/builds/ab/netbsd-3-0-RELEASE/hpcmips/200512182024Z-obj/home/builds/ab/netbsd-3-0-RELEASE/src/sys/arch/hpcmips/compile/GENERIC</A><BR>Sharp HC-AJ1 (Japanese) (TOSHIBA TMPR3922 rev. 1.6 129.00 MHz)<BR>total memory = 25628 KB<BR>total memory banks = 2<BR>memory bank 0 = 0x00000000 7136KB(0x006f8000)<BR>memory bank 1 = 0x006f8000 18492KB(0x0120f000)<BR>avail memory = 17680 KB<BR>mainbus0 (root)<BR>cpu0 at mainbus0: Toshiba TX3922 CPU (0x2230) Rev. 3.0 with software emulated floating point<BR>cpu0: 16KB/16B 2-way set-associative Instruction cache, 64 TLB entries<BR>cpu0: 8KB/16B 2-way set-ass
ociative
write-through Data cache<BR>txsim0 at mainbus0<BR>tx39icu0 at txsim0<BR>tx39power0 at txsim0<BR>tx39clock0 at txsim0<BR>tx39io0 at txsim0<BR>tx39sib0 at txsim0: 1.536 MHz<BR>ucb0 at tx39sib0 slot 0: TOSHIBA TC35413F<BR>ucbtp0 at ucb0: <BR>wsmouse at ucbtp0 not configured<BR>ucbsnd0 at ucb0: audio 3.692 kHz telecom 1.200 kHz<BR>ucbio0 at ucb0<BR>tx39biu0 at txsim0<BR>tx39spi0 at txsim0<BR>txioman0 at txsim0<BR>tx39uart0 at txsim0<BR>txcom0 at tx39uart0 slot 0<BR>txcom1 at tx39uart0 slot 1<BR>txcsbus1 at tx39biu0<BR>teliosio0 at txcsbus1 regcs KUCS1 16bit 0+0xffffffff<BR>tc5165buf0 at txcsbus1 iocs CS1 16bit 0+0x100: polling mode<BR>hpckbd0 at tc5165buf0<BR>wskbd0 at hpckbd0: console keyboard<BR>plum0 at txcsbus1 regcs CS3 32bit 0+0xffffffff iocs MCS0 32bit 0+0xffffffff memcs MCS1 32bit 0+0xffffffff irq1 277(8:21): Plum2 #2<BR>plumicu0 at plum0<BR>plumpower0 at plum0<BR>plumvideo0 at plum0: display mode: 8bpp <BR>hpcfb0 at plumvideo0: 800x480 pixels, 256 colors, 100x48
chars<BR>wsdisplay0 at hpcfb0 kbdmux 1: console (std, vt100 emulation), using wskbd0<BR>wsmux1: connecting to wsdisplay0<BR>ohci0 at plum0<BR>ohci0: OHCI version 1.0<BR>usb0 at ohci0: USB revision 1.0<BR>uhub0 at usb0<BR>uhub0: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1<BR>uhub0: 2 ports with 2 removable, self powered<BR>plumpcmcia0 at plum0<BR>pcmcia0 at plumpcmcia0<BR>wdc1 at pcmcia0 function 0: <SanDisk, SDP, 5/3 0.6><BR>wdc1: i/o mapped mode<BR>atabus0 at wdc1 channel 0<BR>pcmcia1 at plumpcmcia0<BR>ne0 at pcmcia1 function 0: <CF, 10Base-Ethernet, 1.0, ><BR>ne0: Ethernet address 00:10:60:f1:bd:ce<BR>hpcioman1 at txioman0<BR>hpcin0 at hpcioman1 iochip IO, port 7, type 4, id 16, interrupt edge [p]<BR>hpcin1 at hpcioman1 iochip IO, port 8, type 4, id 17, interrupt edge [p]<BR>hpcin2 at hpcioman1 iochip IO, port 6, type 0, id 4, interrupt edge [p]<BR>hpcin3 at hpcioman1 iochip MFIO, port 27, type 2, id 32, interrupt edge [pn]<BR>hpcin4 at hpciom
an1
iochip MFIO, port 29, type 2, id 36, interrupt edge [pn]<BR>hpcout0 at hpcioman1 iochip IO, port 4, type 3, id 26<BR>btnmgr0 at mainbus0<BR>wskbd1 at btnmgr0 mux 1<BR>wskbd1: connecting to wsdisplay0<BR>hpcapm0 at mainbus0: pseudo power management module<BR>apmdev0 at hpcapm0: Power Management spec V1.2<BR>wd0 at atabus0 drive 0: <SanDisk SDCFH-1024><BR>wd0: drive supports 4-sector PIO transfers, LBA addressing<BR>wd0: 977 MB, 1986 cyl, 16 head, 63 sec, 512 bytes/sect x 2001888 sectors<BR>wd0: drive supports PIO mode 4<BR>boot device: wd0<BR>root on wd0a dumps on wd0b<BR>root file system type: ffs</div> <div><BR>* * * * * * * * * * * * * * * * * * * * * * * * * *<BR>X WON'T SHUTDOWN NEATLY WITH THE FOLLOWING ERRORS<BR>* * * * * * * * * * * * * * * * * * * * * * * * * *</div> <div>/dev/ttyE0: 800x480 (800x480) (800bytes/line) 8bit offset=0<BR>mouse: /dev/wsmouse (multiplexer)<BR>keyboard:/dev/ttyE0 (RAW XT keyboard)<BR>key repeat: 400/100 ms.<BR>keymap: jp(jp106)<BR>x
auth:
(argv):1: bad display name "ship7k.:0" in "remove" command<BR>[1] + Done xterm -sb<BR>ship7k: {4} keymap: jp(jp106)<BR>could not init font path element /usr/X11R6/lib/X11/fonts/CID, removing from list!</div> <div>ship7k: {4} Reading keyboard: Input/Output error /* probably due to my keying in ctrl+alt+backspace */<BR>Fatal server error:<BR>could not read keyboard</div> <div>* * * * * * * * * * * * * * * * * * * * * * * * * *<BR>BEFORE TRYING TO FIGURE OUT THE KEYMAP PROBLEM<BR>* * * * * * * * * * * * * * * * * * * * * * * * * *<BR>After X failed to exit neatly, a sample of the "new" keymap (N.B. some keys become inactive) and probably useful becomes</div> <div><+/=> --> return /* VERY USEFUL */<BR><ctrl Q> --> previous commands /* VERY USEFUL*/<BR><shift><6/^> --> & /* VERY USEFUL */</div> <div><_/-> --> clear screen<BR><3> --> ctrl D<BR><L> = }<BR><Q> = ;<BR>ctrl-C gives "."</div>
<div>press {+/=} goes to shell [tcsh shell -- from 2.02 package]</div> <div><BR>* * * * * * * * * * * * * * * * * * * * * * * * * *<BR>PROBABLY A GRACEFUL SHUTDOWN<BR>* * * * * * * * * * * * * * * * * * * * * * * * * *</div> <div>Key-in <ctrl><Q> gives previous command /* Telios AJ1/Ctrl Q */<BR>Key-in <+/=> gives a "RETURN"<BR>Thus <Q> <+> => previous command + return</div> <div>I have previously key in</div> <div>setenv DISPLAY 192.168.10.32:0 /* which is the ip for my SGI O2 machine */</div> <div>xterm -sb &</div> <div>So I have the display displayed on the SGI O2 machine, su to root and perform a normal shutdown of my SHARP HC 7000.<BR></div><p>
<hr size=1>Bring words and photos together (easily) with<br>
<a href="http://us.rd.yahoo.com/mail_us/taglines/PMHM3/*http://photomail.mail.yahoo.com">PhotoMail </a> - it's free and works with your Yahoo! Mail.
--0-2069241648-1139223302=:39668--