Gdium: dmesg output

[Matt Thomas <matt%3am-software.com@localhost>]

Linux version 2.6.24.5-gdiumv3-2.3mnb (rtp%arathorn.mandriva.com@localhost) (gcc  
version 4
.2.3 (4.2.3-6.1mnb1)) #1 Mon Mar 2 14:24:01 EST 2009
busclock=66000000, cpuclock=891960000,memsize=256,highmemsize=256
console [early0] enabled
CPU revision is: 00006303 (ICT Loongson-2)
FPU revision is: 00000501
Determined physical RAM map:
 memory: 0000000010000000 @ 0000000000000000 (usable)
 memory: 0000000010000000 @ 0000000090000000 (usable)
Entering add_active_range(0, 0, 16384) 0 entries of 256 used
Entering add_active_range(0, 147456, 163840) 1 entries of 256 used
Initial ramdisk at: 0x9800000004000000 (3349814 bytes)
Zone PFN ranges:
  Normal          0 ->   163840
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0:        0 ->    16384
    0:   147456 ->   163840
On node 0 totalpages: 32768
  Normal zone: 560 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 32208 pages, LIFO batch:7
  Movable zone: 0 pages used for memmap
Built 1 zonelists in Zone order, mobility grouping on.  Total pages:  
32208
Kernel command line: console=tty1 root=LABEL=mips video=sm501fb: 
1024x600@60 init
=/sbin/finit-mdv rd_start=0x84000000 rd_size=0x331d36
Primary instruction cache 64kB, VIPT, direct mapped, linesize 32 bytes.
Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 32 bytes
Unified secondary cache 512kB 4-way, linesize 32 bytes.
Synthesized clear page handler (13 instructions).
Synthesized copy page handler (22 instructions).
Synthesized TLB refill handler (37 instructions).
Synthesized TLB load handler fastpath (49 instructions).
Synthesized TLB store handler fastpath (49 instructions).
Synthesized TLB modify handler fastpath (48 instructions).
PID hash table entries: 2048 (order: 11, 16384 bytes)
Console: colour dummy device 80x25
console handover: boot [early0] -> real [tty1]
Dentry cache hash table entries: 65536 (order: 5, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 4, 262144 bytes)
Memory: 445328k/524288k available (3168k kernel code, 78608k reserved,  
896k data
, 208k init, 0k highmem)
Calibrating delay loop... 598.60 BogoMIPS (lpj=291840)
Mount-cache hash table entries: 1024
Checking for the multiply/shift bug... no.
Checking for the daddi bug... no.
Checking for the daddiu bug... no.
net_namespace: 120 bytes
NET: Registered protocol family 16
registering PCI controller with io_map_base unset
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Failed to allocate mem resource #0:80000000@80000000 for  
0000:00:00.0
Time: MIPS clocksource has been installed.
Switched to high resolution mode on CPU 0
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 1, 32768 bytes)
TCP established hash table entries: 16384 (order: 4, 262144 bytes)
TCP bind hash table entries: 16384 (order: 3, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 3271k freed
ls2f_freq_cpu_init: Loongson 2F @ 891960 kHz (min 222990 max 891960)
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
io scheduler noop registered (default)
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing  
disabled
RAMDISK driver initialized: 2 RAM disks of 32768K size 1024 blocksize
sm501 0000:00:0e.0: SM501 At 9000000051800000: Version 050100c0, 8 Mb,  
IRQ 36
sm501 0000:00:0e.0: SM502 is detected.
sm501-fb[0] flags 00000200: 0000000051880000..000000005188ffff
sm501-fb[1] flags 00000200: 0000000051900000..000000005194ffff
sm501-fb[2] flags 00000200: 0000000050000000..000000005077ffff
sm501-fb[3] irq 36
sm501-fb sm501-fb.144: fb sm501fb-crt disabled at start
sm501-fb sm501-fb.144: fb sm501fb-panel enabled at start
Console: switching to colour frame buffer device 128x37
sm501-usb[0] flags 00000200: 0000000051840000..000000005185ffff
sm501-usb[1] flags 00000200: 0000000050780000..00000000507fffff
sm501-usb[2] irq 36
sm501-audio[0] flags 00000200: 00000000518a0000..00000000518affff
sm501-audio[1] irq 36
sm501-uart[0] flags 00000200: 0000000051830000..000000005183ffff
sm501-uart[1] irq 36
sm501-pwm[0] flags 00000200: 0000000051810020..000000005181002b
sm501-pwm[1] irq 36
sm501-pwm sm501-pwm.144: SM501 PWM Found at 51810020 irq 36
sm501-gpio[0] flags 00000200: 0000000051810000..000000005181001f
sm501-gpio[1] flags 00000000: 0000000000000000..0000000000000000
sm501-gpio[2] flags 00000000: 0000000000000000..0000000000000000
sm501-gpio[3] flags 00000000: 0000000000000000..0000000000000000
8139too Fast Ethernet driver 0.9.28
eth0: RealTek RTL8139 at 0x9000000051a2a100, 00:d0:35:10:05:e4, IRQ 39
eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
Driver 'sd' needs updating - please use bus_type methods
ehci_hcd 0000:00:0f.1: EHCI Host Controller
ehci_hcd 0000:00:0f.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0f.1: irq 37, io mem 0x51a2a000
ehci_hcd 0000:00:0f.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci_hcd 0000:00:11.1: EHCI Host Controller
ehci_hcd 0000:00:11.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:11.1: irq 38, io mem 0x51a2a200
ehci_hcd 0000:00:11.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
PCI: Setting latency timer of device 0000:00:0f.0 to 64
ohci_hcd 0000:00:0f.0: OHCI Host Controller
ohci_hcd 0000:00:0f.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:0f.0: irq 37, io mem 0x51a28000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
usb 1-3: new high speed USB device using ehci_hcd and address 3
PCI: Setting latency timer of device 0000:00:11.0 to 64
ohci_hcd 0000:00:11.0: OHCI Host Controller
ohci_hcd 0000:00:11.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:11.0: irq 38, io mem 0x51a29000
usb 1-3: configuration #1 chosen from 1 choice
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver libusual
mice: PS/2 mouse device common for all mice
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
oprofile: using timer interrupt.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
usb 2-1: new high speed USB device using ehci_hcd and address 2
vga:start=50000000,end=50ffffff
Freeing unused kernel memory: 208k freed
usb 2-1: configuration #1 chosen from 1 choice
usb 2-2: new high speed USB device using ehci_hcd and address 3
ioctl32(splashy:262): Unknown cmd fd(3) cmd(00004700){t:'G';sz:0}  
arg(2c12f420)
on /dev/fb0
usb 2-2: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usb 3-2: new low speed USB device using ohci_hcd and address 2
usb 3-2: configuration #1 chosen from 1 choice
input: Cypress Semiconductor CY4636 LP RDK Bridge as /class/input/input0
input: USB HID v1.11 Keyboard [Cypress Semiconductor CY4636 LP RDK  
Bridge] on us
b-0000:00:0f.0-2
input: Cypress Semiconductor CY4636 LP RDK Bridge as /class/input/input1
input,hiddev96: USB HID v1.11 Mouse [Cypress Semiconductor CY4636 LP  
RDK Bridge]
 on usb-0000:00:0f.0-2
scsi 0:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0  
ANSI: 0 CCS
sd 0:0:0:0: [sda] 31277056 512-byte hardware sectors (16014 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] 31277056 512-byte hardware sectors (16014 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI removable disk
usb-storage: device scan complete
scsi 1:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0  
ANSI: 0 CCS
sd 1:0:0:0: [sdb] Attached SCSI removable disk
usb-storage: device scan complete
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
EXT3 FS on sda2, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
gpiochip_find_base: found new base at 224
gpiochip_find_base: found new base at 192
sm501-gpio sm501-gpio.144: registered gpio
PCI: Enabling device 0000:00:0d.0 (0000 -> 0002)
PCI: Setting latency timer of device 0000:00:0d.0 to 64
phy0: Selected rate control algorithm 'pid'
Registered led device: rt61pci-phy0:radio
Registered led device: rt61pci-phy0:assoc
ASoC version 0.13.2
soc-audio soc-audio: SM501 AC97 Found
AC97 SoC Audio Codec 0.6
asoc: AC97 HiFi <-> sm501-audio mapping ok
soc-audio soc-audio: sm501_read_codec failed: addr=7e sram=4760
i2c-gpio i2c-gpio.0: using pins 237 (SDA) and 230 (SCL)
i2c-gpio i2c-gpio.1: using pins 234 (SDA) and 233 (SCL)
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device USB 2.0 UVC 1.3M WebCam (064e:a118)
input: USB 2.0 UVC 1.3M WebCam as /class/input/input2
usbcore: registered new interface driver uvcvideo
USB Video Class driver (SVN r205)
lm75 0-0048: hwmon0: sensor 'lm75'
rtc-m41t80 0-0068: chip found, driver version 0.05
rtc-m41t80 0-0068: rtc core: registered m41t83 as rtc0
input: gdium-keys as /class/input/input3
power_supply gdium-battery: uevent
power_supply gdium-battery: No power supply yet
power_supply gdium-battery: power_supply_changed
power_supply gdium-battery: power_supply_changed_work
power_supply gdium-battery: power_supply_update_bat_leds 2
power_supply gdium-battery: uevent
power_supply gdium-battery: POWER_SUPPLY_NAME=gdium-battery
power_supply gdium-battery: Static prop TYPE=Battery
power_supply gdium-battery: 7 dynamic props
power_supply gdium-battery: prop STATUS=Discharging
power_supply gdium-battery: prop PRESENT=0
power_supply gdium-battery: prop VOLTAGE_MIN=7000000
power_supply gdium-battery: prop VOLTAGE_NOW=0
power_supply gdium-battery: prop VOLTAGE_MAX=7950000
power_supply gdium-battery: prop CAPACITY=0
power_supply gdium-battery: prop CAPACITY_LEVEL=Low
power_supply gdium-ac: uevent
power_supply gdium-ac: No power supply yet
power_supply gdium-ac: power_supply_changed
power_supply gdium-ac: power_supply_changed_work
power_supply gdium-ac: power_supply_update_gen_leds 0
power_supply gdium-ac: uevent
power_supply gdium-ac: POWER_SUPPLY_NAME=gdium-ac
power_supply gdium-ac: Static prop TYPE=Mains
power_supply gdium-ac: 1 dynamic props
power_supply gdium-ac: prop ONLINE=0
gdium-laptop 0-0040: Found firmware 0x16
Adding 1024992k swap on /dev/sda4.  Priority:-1 extents:1 across: 
1024992k
eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
fuse init (API version 7.9)
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8