problem booting in j680??

here's the serial console message as it boots see the error at last few lines

--------HPCBOOT--------
CPU: SH7709A
MemoryManager: LockPages
FileManager: FAT
Memory Bank:
[0] 0x0c000000 size 0x02000000
[1] 0x0e000000 size 0x02000000
GetVersionEx
Windows CE 2.11
GetSystemInfo:
wProcessorArchitecture      0x4
dwPageSize                  0x400
dwAllocationGranularity     0x00010000
dwProcessorType             0x2713
wProcessorLevel             0x3
wProcessorRevision          0x0
Display: 640x240 8bpp
DEBUG BIT: ................................ [0x00000000] 0
open file "\Storage Card2\miniroot.fs"(4194304 byte).
open file "\Storage Card2\netbsd.gz"(700227 byte).
Loader: COFF
file size: text 0x117bb0 + data 0x7710 = 0x11f2c0 byte
address translation table 5376 pages.(43008 byte)
allocated 5376 page. mapped 5376 page.
2nd bootloader address U0: 0x005dfc00 P1: 0x8ce4e800
[text] ->load 0x8c001000+0x00117bb0=0x8c118bb0 ofs=0x000000d0+0x117bb0
[data] ->load 0x8c118bb0+0x00007710=0x8c1202c0 ofs=0x00117c80+0x7710
[bss ] ->load 0x8c1202c0+0x000396b4=0x8c159974 ofs=0x00000000+0x0
[zero clear] ->0x8c1202c0+0x000396b4=0x8c159974
open file "\Storage Card2\miniroot.fs"(4194304 byte).
[file system image] ->load 0x8c15a000+0x00400000=0x8c55a000 ofs=0x00000000+0x400000
load link 5330 zero clear link 1.
kernel entry address: 0x8c001000
framebuffer: 640x240 type=5 linebytes=1280 addr=0xb2000000
console = 3
boot arg: 0x8ce4e400 stack: 0x8ce4e200
Booting kernel...
option [0]: netbsd.gz

option [1]: h

option [2]: v

option [3]: m=miniroot.fs

option [4]: root=/dev/md0

platid(cpu/machine) = 08108000/02c20101

display=640x240-(1280) 0xb2000000 type=5

search D-RAM from 0x0c55a000 for 0x0e000000

mem_cluster_cnt = 2

mem_clusters[0] = {0xc000000+0x55a000 <0xc55a000}

mem_clusters[1] = {0xc55a000+0xaa6000 <0xd000000}

total memory = 16Mbyte

nkpde = 8

proc0 stack: 0x8c55ef94

loading 0xc568000,0xa98000

NetBSD 1.5T (RAMDISK) #0: Sun Mar 25 02:27:37 JST 2001

uch%alexandrite.rfe.nop.or.jp@localhost:/work/cvsrep/syssrc/sys/arch/hpcsh/compile/RAMDISK

total memory = 16384 KB

avail memory = 9552 KB

using 230 buffers containing 920 KB of memory

HP Jornada 680 (Hitachi SH7709A)

mainbus0 (root)

bivideo0 at mainbus0: pseudo video controller

bivideo0: framebuffer address: 0xb2000000

hpcfb0 at bivideo0: hpcrasops 640x240 pixels, 65536 colors, 80x24 chars: multi

wsdisplay0 at hpcfb0

wsdisplay0: screen 0 added (std, vt100 emulation)

shb0 at mainbus0

scif0 at shb0 port 0xa4000008-0xa4000017 irq 12

scif0: console

hd64461if0 at shb0 irq 4

--------------------------------[hd64461_info]--------------------------------

STBCR (System Control Register)

CKIO_STBY[_] SAFECKE_IST[x] SLCKE_IST[_] SAFECKE_OST[x] SLCKE_OST[_] SMIAST[x] SLCDST[_] SPC0ST[x] SPC1ST[_] SAFEST[x] STM0ST[x] STM1ST[_] SIRST[x] SURTSD[x]

SYSCR (System Configuration Register)

SCPU_BUS_IGAT[_] SPTA_IR[_] SPTA_TM[x] SPTB_UR[_] WAIT_CTL_SEL[_] SMODE1[_] SMODE0[_]

SCPUCR (CPU Data Bus Control Register)

SPDSTOF[_] SPDSTIG[_] SPCSTOF[_] SPCSTIG[_] SPBSTOF[_] SPBSTIG[_] SPASTOF[_] SPASTIG[_] SLCDSTIG[_] SCPU_CS56_EP[_] SCPU_CMD_EP[_] SCPU_ADDR_EP[_] SCPDPU[_] SCPU_A2319_EP[_]

NIRR (Interrupt Request Register)

PCC0R[_] PCC1R[_] AFER[_] GPIOR[_] TMU0R[_] TMU1R[_] IRDAR[_] UARTR[_]

NIMR (Interrupt Mask Register)

PCC0M[_] PCC1M[_] AFEM[x] GPIOM[x] TMU0M[x] TMU1M[x] IRDAM[x] UARTM[x]

--------------------------------------------------------------------------------

hd64461video at hd64461if0 not configured

hd64461pcmcia0 at hd64461if0

-----------------------------[hd64461pcmcia_info]-----------------------------

[PCC0 memory and I/O card (SH3 Area 6)]

PCC0 Interface Status Register

P0READY[_] P0MWP[_] P0VS2[x] P0VS1[x] P0CD2[x] P0CD1[x] P0BVD2[_] P0BVD1[_]

PCC0 General Control Register

P0DRVE[_] P0PCCR[_] P0PCCT[_] P0VCC0[x] P0MMOD[x] P0PA25[_] P0PA24[_] P0REG[_]

PCC0 Card Status Change Register

P0SCDI[_] P0IREQ[x] P0SC[_] P0CDC[_] P0RC[_] P0BW[_] P0BD[_]

PCC0 Card Status Change Interrupt Enable Register

P0CRE[_] P0SCE[_] P0CDE[x] P0RE[_] P0BWE[_] P0BDE[_]

interrupt type: none

PCC0 Software Control Register

P0VCC1[x] P0SWP[_]

[PCC1 memory card only (SH3 Area 5)]

PCC1 Interface Status Register

P1READY[x] P1MWP[x] P1VS2[x] P1VS1[_] P1CD2[_] P1CD1[_] P1BVD2[x] P1BVD1[x]

PCC1 General Contorol Register

P1DRVE[x] P1PCCR[_] P1VCC0[_] P1MMOD[x] P1PA25[_] P1PA24[_] P1REG[_]

PCC1 Card Status Change Register

P1SCDI[_] P1CDC[_] P1RC[_] P1BW[_] P1BD[_]

PCC1 Card Status Change Interrupt Enable Register

P1CRE[_] P1CDE[x] P1RE[x] P1BWE[_] P1BDE[_]

PCC1 Software Control Register

P1VCC1[_] P1SWP[_]

[General Control]

PCC0 Output pins Control Register

P0DEPLUP[_] P0AEPLUP[_]

PCC1 Output pins Control Register

P1RST8MA[_] P1RST4MA[_] P1RAS8MA[_] P1RAS4MA[_]

PC Card General Control Register

PSSDIR[_] PSSRDWR[_]

--------------------------------------------------------------------------------

pcmcia0 at hd64461pcmcia0

detect_card: remove

pcmcia1 at hd64461pcmcia0

detect_card: insert

_chip_socket_enable: enable channel 1

power_on: 3.3V card

_chip_socket_enable: OK.

_chip_mem_alloc: base 0xb4000000 size 0x400

_chip_mem_map: (attribute) 0xb4000000+0-> 0+0x400

_chip_mem_unmap: 0xb4000000-0x400

pcmcia1: CIS version PCMCIA 2.0 or 2.1

pcmcia1: CIS info: STI, Flash 5.0

pcmcia1: Manufacturer code 0x7, product 0x0

pcmcia1: function 0: fixed disk(ata), ccr addr 200 mask f

pcmcia1: function 0, config table entry 0: memory card; irq mask 0; memspace 0-7ff; rdybsy_active powerdown

pcmcia1: function 0, config table entry 1: I/O card; irq mask ffff; iomask 4, iospace 0-f; memspace 0-7ff; rdybsy_active io8 io16 irqshare irqpulse irqlevel powerdown

pcmcia1: function 0, config table entry 2: I/O card; irq mask 4000; iomask a, iospace 1f0-1f7 3f6-3f7; memspace 0-7ff; rdybsy_active io8 io16 irqshare irqpulse irqlevel powerdown

pcmcia1: function 0, config table entry 3: I/O card; irq mask 4000; iomask a, iospace 170-177 376-377; memspace 0-7ff; rdybsy_active io8 io16 irqshare irqpulse irqlevel powerdown

wdc0 at pcmcia1 function 0_chip_mem_alloc: base 0xb4000000 size 0x800

_chip_socket_enable: enable channel 1

power_on: 3.3V card

_chip_socket_enable: OK.

_chip_mem_alloc: base 0xb4000000 size 0x14

_chip_mem_map: (attribute) 0xb4000000+0x200-> 0x200+0x14

_chip_mem_map: (common) 0xb4000000+0-> 0x1000000+0x800

memory mapped mode

wd0 at wdc0 channel 0 drive 0: <Hitachi CVM1.1.1>

wd0: drive supports 1-sector PIO transfers, LBA addressing

wd0: 122 MB, 978 cyl, 8 head, 32 sec, 512 bytes/sect x 250368 sectors

_chip_mem_unmap: 0xb4000200-0x14

hd64461gpio at hd64461if0 not configured

hd64461afe at hd64461if0 not configured

hd64461uart at hd64461if0 not configured

hd64461fir at hd64461if0 not configured

pfckbd0 at mainbus0

hpckbd0 at pfckbd0: no keymap.

wskbd0 at hpckbd0 mux 1

md0: internal 4096 KB image area

boot device: wd0

root on md0a dumps on md0b

WARNING: preposterous time in file system

readclock: 3/8/16/21/53/44(6)

WARNING: file system time much less than clock time

init: copying out path `/sbin/init' 11

Process (pid 1) got signal 4

so.... whats going on? i already have 256mb cf set up