Port-hpcsh archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: Boot hang on Jornada 690
Hi.
> On Tuesday, March 10, 2020, 01:57:55 AM GMT+1, Jaromír Doleček <jaromir.dolecek%gmail.com@localhost> wrote:
> Bjorn, can you send me the full dmesg of old and new kernel?
Sure.
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 8.1 (GENERIC) #0: Fri May 31 08:43:59 UTC 2019
mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/hpcsh/compile/GENERIC
HP Jornada 690 (European)
total memory = 32768 KB
avail memory = 27280 KB
timecounter: Timecounters tick every 15.625 msec
mainbus0 (root)
cpu0 at mainbus0: SH3 132.706 MHz PCLOCK 22.117 MHz
cpu0: 16KB/16B 4-way set-associative I/D-unified cache.
cpu0: U0, P0, P3 write-back; P1 write-back
cpu0: 4-way set-associative 128 TLB entries
cpu0: VPN mode, multiple virtual storage mode
btnmgr0 at mainbus0
wskbd2 at btnmgr0 mux 1
shb0 at mainbus0
rtc0 at shb0
scif0 at shb0
scif0: console
adc0 at shb0
j6x0pwr0 at adc0
j6x0tp0 at adc0
wsmouse0 at j6x0tp0 mux 0
wskbd1 at j6x0tp0 mux 1
j6x0lcd0 at shb0: brightness 28, contrast 11
hd64461if0 at shb0
hd64461video0 at hd64461if0: frame buffer = 512 KB
hpcfb0 at hd64461video0
wsdisplay0 at hpcfb0 kbdmux 1
wsmux1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wskbd1: connecting to wsdisplay0
hpcfb: 640x240 pixels, 65536 colors, 80x24 chars
hpcfb: 640x240 pixels, 65536 colors, 80x24 chars
hpcfb: 640x240 pixels, 65536 colors, 80x24 chars
hpcfb: 640x240 pixels, 65536 colors, 80x24 chars
wsdisplay0: screen 0-3 added (std, vt100 emulation)
hd64461pcmcia0 at hd64461if0
com0 at hd64461if0: device problem. don't attach.
pfckbd0 at mainbus0
hpckbd0 at pfckbd0
wskbd0 at hpckbd0 mux 1
wskbd0: connecting to wsdisplay0
hpcapm0 at mainbus0: pseudo power management module
apmdev0 at hpcapm0: Power Management spec V1.2
timecounter: Timecounter "clockinterrupt" frequency 64 Hz quality 0
timecounter: Timecounter "tmu_pclock_4" frequency 5529389 Hz quality 0
pcmcia0 at hd64461pcmcia0
wi0 at pcmcia0 function 0: <NETGEAR MA401RA Wireless PC, Card, ISL37300P, Eval-RevA>
wi0: 802.11 address 00:09:5b:49:33:8d
wi0: using RF:PRISM2.5 MAC:ISL3873B(PCMCIA)
wi0: Intersil Firmware: Primary (1.0.7), Station (1.3.6)
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
pcmcia1 at hd64461pcmcia0
wdc0 at pcmcia1 function 0: <SanDisk, SDP, 5/3 0.6>
wdc0: memory mapped mode
atabus0 at wdc0 channel 0
wd0 at atabus0 drive 0
wd0: <SanDisk SDCFX-1024>
wd0: drive supports 4-sector PIO transfers, LBA addressing
wd0: 977 MB, 1986 cyl, 16 head, 63 sec, 512 bytes/sect x 2001888 sectors
wd0: drive supports PIO mode 4
WARNING: 1 error while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/hpcsh/8.1/modules
Enter pathname of shell or RETURN for /bin/sh:
Terminal type? [unknown] xterm
Terminal type is xterm.
We recommend that you create a non-root account and use su(1) for root access.
# exit
--> Normal startup here <--
9.0 follows.
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[ 1.0000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.
[ 1.0000000] NetBSD 9.0 (GENERIC) #0: Fri Feb 14 00:06:28 UTC 2020
[ 1.0000000] mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/hpcsh/compile/GENERIC
[ 1.0000000] HP Jornada 690 (European)
[ 1.0000000] total memory = 32768 KB
[ 1.0000000] avail memory = 27012 KB
[ 1.0000000] timecounter: Timecounters tick every 15.625 msec
[ 1.0000000] mainbus0 (root)
[ 1.0000000] cpu0 at mainbus0: SH3 132.696 MHz PCLOCK 22.117 MHz
[ 1.0000000] cpu0: 16KB/16B 4-way set-associative I/D-unified cache
[ 1.0000000] cpu0: U0, P0, P3 write-back; P1 write-back
[ 1.0000000] cpu0: 4-way set-associative 128 TLB entries
[ 1.0000000] cpu0: VPN mode, multiple virtual storage mode
[ 1.0000000] btnmgr0 at mainbus0
[ 1.0000000] wskbd2 at btnmgr0 mux 1
[ 1.0000000] shb0 at mainbus0
[ 1.0000000] rtc0 at shb0
[ 1.0000000] scif0 at shb0
[ 1.0000000] scif0: console
[ 1.0000000] adc0 at shb0
[ 1.0000000] j6x0pwr0 at adc0
[ 1.0000000] j6x0tp0 at adc0
[ 1.0000000] wsmouse0 at j6x0tp0 mux 0
[ 1.0000000] wskbd1 at j6x0tp0 mux 1
[ 1.0000000] j6x0lcd0 at shb0: brightness 28, contrast 11
[ 1.0000000] hd64461if0 at shb0
[ 1.0000000] hd64461video0 at hd64461if0: frame buffer = 512 KB
[ 1.0000000] hpcfb0 at hd64461video0
[ 1.0000000] wsdisplay0 at hpcfb0 kbdmux 1
[ 1.0000000] wsmux1: connecting to wsdisplay0
[ 1.0000000] wskbd2: connecting to wsdisplay0
[ 1.0000000] wskbd1: connecting to wsdisplay0
[ 1.0000000] hpcfb: 640x240 pixels, 65536 colors, 80x24 chars
[ 1.0000000] hpcfb: 640x240 pixels, 65536 colors, 80x24 chars
[ 1.0000000] hpcfb: 640x240 pixels, 65536 colors, 80x24 chars
[ 1.0000000] hpcfb: 640x240 pixels, 65536 colors, 80x24 chars
[ 1.0000000] wsdisplay0: screen 0-3 added (std, vt100 emulation)
[ 1.0000000] hd64461pcmcia0 at hd64461if0
[ 1.0000000] com0 at hd64461if0: device problem. don't attach.
[ 1.0000000] pfckbd0 at mainbus0
[ 1.0000000] hpckbd0 at pfckbd0
[ 1.0000000] wskbd0 at hpckbd0 mux 1
[ 1.0000000] wskbd0: connecting to wsdisplay0
[ 1.0000000] hpcapm0 at mainbus0: pseudo power management module
[ 1.0000000] apmdev0 at hpcapm0: Power Management spec V1.2
[ 1.0000000] timecounter: Timecounter "clockinterrupt" frequency 64 Hz quality 0
[ 1.0000070] timecounter: Timecounter "tmu_pclock_4" frequency 5529413 Hz quality 0
[ 1.4077519] pcmcia0 at hd64461pcmcia0
[ 4.4077521] wi0 at pcmcia0 function 0: <NETGEAR MA401RA Wireless PC, Card, ISL37300P, Eval-RevA>
[ 4.4554814] wi0: 802.11 address 00:09:5b:49:33:8d
[ 4.6902770] wi0: using RF:PRISM2.5 MAC:ISL3873B(PCMCIA)
[ 4.7204875] wi0: Intersil Firmware: Primary (1.0.7), Station (1.3.6)
[ 4.7595471] wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 5.5640027] pcmcia1 at hd64461pcmcia0
[ 8.5640032] wdc0 at pcmcia1 function 0: <SanDisk, SDP, 5/3 0.6>
[ 8.5990520] wdc0: memory mapped mode
[ 9.1108873] atabus0 at wdc0 channel 0
[ 9.1265606] wd0 at atabus0 drive 0
[ 9.1433432] wd0: <SanDisk SDCFX-1024>
[ 9.1704108] wd0: drive supports 4-sector PIO transfers, LBA addressing
[ 9.2094334] wd0: 977 MB, 1986 cyl, 16 head, 63 sec, 512 bytes/sect x 2001888 sectors
[ 9.2557991] wd0: drive supports PIO mode 4WARNING: 1 error while detecting hardware; check system log.
[ 9.6985855] boot device: wd0
[ 13.0796288] root on wd0a dumps on wd0b
[ 16.0796292] wd0a: error reading fsbn 128 of 128-143 (wd0 bn 102944; cn 50 tn 17 sn 0), xfer f5c, retry 0
[ 16.0796292] wd0: (aborted command) <-- Hangs here.
Only difference I can see at a glance is that there is a linebreak missing before "WARNING: 1 error [...]"
Per David's suggestion I also tried -current with the same result as 9.0. (Sorry for the delay.)
/B
Home |
Main Index |
Thread Index |
Old Index