Subject: Mounting a dos hd
To: None <port-i386@NetBSD.ORG>
From: Noby Nobriga <eos@felix.teclink.net>
List: port-i386
Date: 02/08/1996 16:31:28
First, I'd like to say thanks to ALL of the people who helped me with my
"installing sets" problem and mounting the floppy. Thanks.
Now, I've got some more mounting questions.
I have an 81 Meg hd that I've partitioned 20M for DOS and 61M for
NetBSD. Can someone tell me how I can mount my dos partition on this
drive? Here's some information if you may need it to help me better.
Also, I've searched through FAQs and all, but have failed in having
anything work.
=========================== /etc/fstab ===============================
/dev/wd0a / ffs rw 1 1
/dev/wd0e /usr ffs rw 1 2
================== disklabel -e -r /dev/rwd0d ========================
#/dev/rwd0d
type: ST506
disk: mywd
label:
flags:
bytes/sector: 512
sectors/track: 17
tracks/cylinder: 10
sectors/cylinder: 170
cylinders: 977
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0 # milliseconds
track-to-track seek: 0 # milliseconds
drivedata: 0
5 partitions:
# size offset fstype [fsize bsize cpg]
a: 32640 43010 4.2BSD 1024 8192 16 # (Cyl. 253 - 444)
b: 24480 75650 swap # (Cyl. 445 - 588)
c: 122740 43010 unused # (Cyl. 253 - 974)
d: 166090 0 unused 0 0 # (Cyl. 0 - 976)
e: 65620 100130 4.2BSD 1024 8192 16 # (Cyl. 589 - 974)
========================================================================
Also, I have a second hd that's entirely dos. How can I mount this as well?
Thanks in advance,
Noby Nobriga
(Both drives are IDE on a common card)