Subject: Re: config file line for Hayes ESP?
To: None <tls@rek.tjls.com>
From: Michael L. VanLoon -- HeadCandy.com <michaelv@HeadCandy.com>
List: port-i386
Date: 05/18/1996 21:52:04
>What do I need to put in the config file to get this card working with the HW
>flow control and larger FIFO?
options COM_HAYESP
Then just make sure you have a standard com port config line for it.
For example:
com2 at isa? port 0x3e8 irq 5
One important note: the ESP can be used at more IRQs than a "standard
com port". Specifically, it can use the "upper" IRQ lines, in the
8-15 range, as well as the traditional ones. You'll probably want to
re-run that software config program to make sure you have everything
set right. The "com port" that you set it for determines its I/O
address range. The IRQ is set separately.
If you need more help, let me know.
-----------------------------------------------------------------------------
Michael L. VanLoon michaelv@HeadCandy.com
--< Free your mind and your machine -- NetBSD free un*x >--
NetBSD working ports: 386+PC, Mac 68k, Amiga, Atari 68k, HP300, Sun3,
Sun4/4c/4m, DEC MIPS, DEC Alpha, PC532, VAX, MVME68k, arm32...
NetBSD ports in progress: PICA, others...
Roll your own Internet access -- Seattle People's Internet cooperative.
If you're in the Seattle area, ask me how.
-----------------------------------------------------------------------------