On Wed, 29 May 1996 16:54:34 +0200 (MET DST) 
 Matthias Scheler <tron@sandra.owl.de> wrote:

 > I did and I used "link0 link1" but it didn't help.

>From sys/dev/ic/elink3.c:

        /* 
         * you can `ifconfig (link0|-link0) ep0' to get the following
         * behaviour: 
         *      -link0  disable AUI/UTP. enable BNC.
         *      link0   disable BNC. enable AUI.
         *      link1   if the card has a UTP connector, and link0 is
         *              set too, then you get the UTP port.
         */

----save the ancient forests - http://www.bayarea.net/~thorpej/forest/----
Jason R. Thorpe                                       thorpej@nas.nasa.gov
NASA Ames Research Center                               Home: 408.866.1912
NAS: M/S 258-6                                          Work: 415.604.0935
Moffett Field, CA 94035                                Pager: 415.428.6939