Subject: Re: Unofficial i386 1.3_ALPHA snapshot available
To: None <Havard.Eidnes@runit.sintef.no>
From: Simon J. Gerraty <sjg@quick.com.au>
List: port-i386
Date: 11/05/1997 01:37:51
> ftp://ftp.ntnu.no/pub/NetBSD/i386-1.3_ALPHA/floppy/boot13_ALPHA-PCMCIADEBUG.fs
Produces lots more info during probing - unfortunately most of it
scrolls off the screen before I can read it, /kern/msgbuf is cool
I had to use a serial console last time I was debugging pcmcia stuff
:-)
we have:
pcic0 ar isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xd3fff: using irq 3
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia0: CIS version 2.0 or 2.01
pcmcia0: CIS info: 3Com Corporation, 3C589, TP/BNC LAN Card Ver. 1a
pcmcia0: Manufacturer code 0x101, product 0x589
pcmcia0: function 0: network adapter, ccr add 2000 mask 3
pcmcia0: function 0, config table entry 1: I/O card; irq mask 1; iomask 4, iospace 0-f; rdybsy_active wp_actve bvd_active io8 io16 irqlevel
pcmcia0: function 0, config table entry 3: I/O card; irq mask 1; iomask 4, iospace 0-f; rdybsy_active wp_actve bvd_active io8 io16 irqlevel
[next bit is garbled but works out to next 2 lines]
pcmcia0: function 0 CCR ar 0 offset 0: 0 2 ff ff, ff ff ff ff, ff
ep1 at pcmcia0 function 0 port 0x400-0x40f: 3Com 3C589 Ethernet
ep1: MAC address 00:a0:af:df:7c:ba
ep1: 8KB byte-wide FIFO, (undefined) Rx:Tx split, utp/aui/bnc (default bnc)
pcmcia0: function 0 CCR ar 0 offset 0: ff ff ff ff, ff ff ff ff, ff
Anyway, when I ifconfig ep1 I get:
# ifconfig ep1 203.12.250.4
pcmcia0: card irq 5
pcmcia0: function 0
[rats wasn't quick enough - couldn't even wake up the screen, reset time]
Ok, we got:
# ifconfig ep1 203.12.250.4
pcmcia0: card irq 5
pcmcia0: function 0 CCR ar 0 offset 0: 0 2 ff ff, ff ff ff ff, ff
[game over]
btw, anyone have any idea what this is?
sea0: board type unknown at address 0xc8000
is it likely to be interfering with anything?
is the fact that we appear to get
pcmcia0: function 0, config table entry 1
and
pcmcia0: function 0, config table entry 3
with the same info, a problem?
Anyway thanks to everyone for their help.
I may be of the air for a couple of days - builders comming in to
pcmcia0: renovate...
--sjg