Subject: Re: Boca PnP modem setup
To: Christos Zoulas <christos@zoulas.com>
From: Jason Thorpe <thorpej@nas.nasa.gov>
List: port-i386
Date: 07/29/1998 08:55:14
On Wed, 29 Jul 1998 08:12:22 -0400 
 christos@zoulas.com (Christos Zoulas) wrote:

 > | isapnp0: configuring <OPL3-SA2 Sound Board, YMH0021, , >
 > | isapnp0: <OPL3-SA2 Sound Board, YMH0021, , > port 0x220/16,0x530/8,0x388/4,0x330/2,0x370/2 irq 5 drq 0,1 not configured
 > | Found <OPL3-SA2 Sound Board, YMH0022, PNPB02F, > config: preferred
 > | 1 IO Ports: 16 address bits, alignment 1 min 0x201, max 0x201
 > | Register configuration:
 > | io[0]: 0x201/0
 > | drq[0]: 0
 > | drq[1]: 0
 > 
 > OK, if you want to try to configure this as an sb device, add:
 > 
 > 	devlogic db YMH021
 > 
 > To the isapnpdevs and rebuild the header files and the kernel.

No, that needs to be configured as a "ym" device.

Jason R. Thorpe                                       thorpej@nas.nasa.gov
NASA Ames Research Center                            Home: +1 408 866 1912
NAS: M/S 258-5                                       Work: +1 650 604 0935
Moffett Field, CA 94035                             Pager: +1 650 940 5942