Subject: Re: PCIC interrupt selection
To: Jason Thorpe <thorpej@nas.nasa.gov>
From: None <rvb@sicily.odyssey.cs.cmu.edu>
List: port-i386
Date: 08/10/1998 16:51:29
But not only do we need to set allowable irq's but also
allowable ports. The 560X enables a parallel port at 0x3bc,
which makes the next allocation request (for ether in my case)
get 0x3cc. This is where the neomagic chip lives -- TILT!
Jason Thorpe <thorpej@nas.nasa.gov> writes:
> On Mon, 10 Aug 1998 11:23:09 -0400
> "Perry E. Metzger" <perry@piermont.com> wrote:
>
> > Well, we need a solution here. We've been dilly-dallying about it for
> > the last year. Maybe the sysctl solution isn't perfect, but it will at
> > least help people doing installs get their ethernet cards up far
> > enough that they can install their laptops and get to the point where
> > they can build a custom kernel. We can tell them to keep the SCSI
> > cards out while they do that.
> >
> > Right now they have no tool to boot up at all. The sysctl will at
> > least get them part way.
>
> Maybe someone should make the necessary changes to config(8) so that
> a reasonable boot-time user interface for enabling/disabling/changing
> device configuration could be done.
>
> Jason R. Thorpe thorpej@nas.nasa.gov
> NASA Ames Research Center Home: +1 408 866 1912
> NAS: M/S 258-5 Work: +1 650 604 0935
> Moffett Field, CA 94035 Pager: +1 650 940 5942