On Wed, 12 Aug 1998 15:13:45 +1000 (EST) 
 Matthew Aldous <mda@mhri.edu.au> wrote:

 > Here's the dmesg output for a basic 1.3.2 kernel, with the above options.
 > 
 > Thanks *heaps* for any help.

So, I did a little research on this..  The SMC EliteCard isn't even
supported by Linux.. it's either very new, or very rare.  Your best
bet here is going to be to contact SMC and get literature on the
card.

I'm going to put in a literature request for it and see what I can turn
up...

 > 
 > Have fun,
 > Matthew.
 > 
 > ------------------------------------------------------------------------------
 > Copyright (c) 1996, 1997, 1998
 >     The NetBSD Foundation, Inc.  All rights reserved.
 > Copyright (c) 1982, 1986, 1989, 1991, 1993
 >     The Regents of the University of California.  All rights reserved.
 > 
 > NetBSD 1.3.2 (COSMOS) #0: Tue Aug 11 15:10:34 PDT 1998
 >     root@cosmos:/usr/src/sys/arch/i386/compile/COSMOS
 > cpu0: family 5 model 2 step c
 > cpu0: Intel Pentium (P54C) (586-class)
 > real mem  = 16379904
 > avail mem = 15310848
 > using 225 buffers containing 921600 bytes of memory
 > mainbus0 (root)
 > pci0 at mainbus0 bus 0: configuration mode 1
 > pchb0 at pci0 dev 0 function 0
 > pchb0: Intel 82437MX Mobile System Controller (MTSC) (rev. 0x01)
 > pcib0 at pci0 dev 1 function 0
 > pcib0: Intel 82371FB PCI-to-ISA Bridge (PIIX) (rev. 0x02)
 > Texas Instruments PCI1130 (CardBus bridge, revision 0x02) at pci0 dev 2 function 0 not configured
 > Texas Instruments PCI1130 (CardBus bridge, revision 0x02) at pci0 dev 2 function 1 not configured
 > Trident Microsystems TGUI 9320 (VGA display, revision 0xe3) at pci0 dev 3 function 0 not configured
 > isa0 at pcib0
 > wdc0 at isa0 port 0x1f0-0x1f7 irq 14
 > wd0 at wdc0 drive 0: <IBM-DSOA-21080>
 > wd0: using 16-sector 16-bit pio transfers, lba mode
 > wd0: 1033MB, 2116800 sec, 512 bytes/sec
 > npx0 at isa0 port 0xf0-0xff: using exception 16
 > pc0 at isa0 port 0x60-0x6f irq 1: color
 > pc0: console
 > pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xd3fff: using irq 3
 > pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
 > pcmcia0 at pcic0 controller 0 socket 0
 > cis mem map f2021000
 > pcmcia0: CIS tuple chain:
 > CISTPL_DEVICE type=funcspec speed=null
 >  01 03 d0 ff ff
 > CISTPL_FUNCID
 >  21 02 06 00
 > CISTPL_MANFID
 >  20 04 08 01 05 01
 > CISTPL_VERS_1
 >  15 26 04 01 53 4d 43 00 50 43 4d 20 45 74 68 65
 >  72 6e 65 74 20 41 64 61 70 74 65 72 00 43 49 53
 >  20 56 31 2e 30 35 00 ff
 > CISTPL_CONFIG
 >  1a 0a 02 01 00 00 01 03 00 00 00 ff
 > CISTPL_CFTABLE_ENTRY
 >  1b 0b c1 01 70 50 bc 8e 48 40 00 02 ff
 > unhandled CISTPL 22
 >  22 02 01 02
 > unhandled CISTPL 22
 >  22 05 02 80 96 98 00
 > unhandled CISTPL 22
 >  22 02 03 01
 > unhandled CISTPL 22
 >  22 08 04 06 00 00 c0 2f 48 d2
 > unhandled CISTPL 22
 >  22 02 05 01
 > CISTPL_END
 >  ff
 > cis mem map f2021000
 > CISTPL_LINKTARGET expected, code 01 observed
 > pcmcia0: CIS version 2.0 or 2.01
 > pcmcia0: CIS info: SMC, PCM Ethernet Adapter, CIS V1.05
 > pcmcia0: Manufacturer code 0x108, product 0x105
 > pcmcia0: function 0: network adapter, ccr addr 10000 mask 3
 > pcmcia0: function 0, config table entry 1: I/O card; irq mask 8ebc; rdybsy_active wp_active bvd_active irqpulse
 > SMC, PCM Ethernet Adapter, CIS V1.05 (manufacturer 0x108, product 0x105) function 0 not configured
 > pcmcia1 at pcic0 controller 0 socket 1
 > biomask 4000 netmask 4000 ttymask 400a
 > boot device: wd0
 > root on wd0a dumps on wd0b
 > root file system type: ffs
 > ------------------------------------------------------------------------------

Jason R. Thorpe                                       thorpej@nas.nasa.gov
NASA Ames Research Center                            Home: +1 408 866 1912
NAS: M/S 258-5                                       Work: +1 650 604 0935
Moffett Field, CA 94035                             Pager: +1 650 940 5942