Subject: Re: 3Com Etherlink III
To: Kevin Sullivan <ksulliva@psc.edu>
From: Mark Brinicombe <mark@causality.com>
List: port-i386
Date: 08/24/1998 22:54:06
On Mon, 24 Aug 1998, Kevin Sullivan wrote:
> What it is with 3Com Etherlink III PC cards? I've seen ~6 different cards
> all labeled "Etherlink III" but they've all needed slight driver changes.
> Sometimes the ones with identical chip labels work differently. Are 3Com
> engineers just making random changes because they're bored?
I have a 3C589A card here that does not work either. This made a network
install on my laptop rather interesting...
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xd3fff: using irq 11
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia0: CIS version 2.0 or 2.01
pcmcia0: CIS info: 3Com Corporation, 3C589, TP/BNC LAN Card Ver. 2a, 000002
pcmcia0: Manufacturer code 0x101, product 0x589
pcmcia0: function 0: network adapter, ccr addr 10000 mask 3
pcmcia0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 4, iospace 0-f; rdybsy_active wp_active bvd_active io8 io16 irqlevel
pcmcia0: function 0, config table entry 3: I/O card; irq mask ffff; iomask 4, iospace 0-f; rdybsy_active wp_active bvd_active io8 io16 irqlevel
ep0 at pcmcia0 function 0 port 0x330-0x33f: 3Com 3c589 10Mbps Ethernet
ep0: wrote 0x7ff to TX_AVAIL_THRESH, read back 0x0. Interface disabled
pcmcia1 at pcic0 controller 0 socket 1
> So, my latest problem card is a 3C589D-TP. The MAC address on the card is
> 00:10:4b:a0:36:ca. NetBSD probes it as ff:fc:4b:a0:36:ca; the first two
> octets are wrong, the others are correct. This occurs under both 1.3.2 and
> 1.3F (I don't have a more recent -current handy). Is this a known problem?
> Is it fixed in -current?
This problem is not fixed in -current (at least with my card).
Cheers,
Mark