>>>>> In article <199808250633.IAA18111@ragnarok.si.sintef.no>, Geir.I.Jensen@Runit.Sintef.No writes:

> Have a look at http://www.qdi.nl/html/brilliant4.html

> That card has the new chipset from Intel, but uses the 7880 and the
> 82557. I will probably buy one real soon (waiting for a success
> story from a fellow NetBSD user ;). 

I guess that would be me. :-)

Well, I have finally received the board and it works like a charm. It
has four free PCI slots. I had no problems with the onboard Adaptec
7880 Wide SCSI controller or the Intel 82558 10/100Mbs ethernet
controller. It's a dual CPU board, but we've only installed one one as
yet (any ETA on SMP anyone?  Charles? Would love to run it with 2
CPUs).

/Janne

PS. Here is the dmesg:

NetBSD 1.3G (DOGBERT) #0: Wed Aug 26 19:30:59 CEST 1998
    root@ibtest4.cs.chalmers.se:/usr/src/sys/arch/i386/compile/DOGBERT
cpu0: family 6 model 5 step 1
cpu0: Intel Pentium II (686-class)
real mem  = 536477696
avail mem = 499478528
using 2822 buffers containing 26927104 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o enabled, memory enabled
Intel 82443BX PCI AGP Controller (PAC) (host bridge, revision 0x02) at pci0 dev 0 function 0 not configured
ppb0 at pci0 dev 1 function 0: Intel 82443BX AGP Device (PAC) (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o enabled, memory enabled
S3 product 0x8a10 (VGA display, revision 0x04) at pci1 dev 0 function 0 not configured
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
Intel 82371AB IDE controller (PIIX4) (IDE mass storage, interface 0x80, revision 0x01) at pci0 dev 7 function 1 not configured
uhci0 at pci0 dev 7 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01)
uhci0: interrupting at irq 10
uhci0: USB version 1.0
usb0 at uhci0
uhub0 at usb0: Intel UHCI root hub (class 9/1) (rev 1.00/1.00) (addr 1)
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x02) at pci0 dev 7 function 3 not configured
ahc0 at pci0 dev 8 function 0
ahc0: interrupting at irq 12
ahc0: Using left over BIOS settings
ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs
scsibus0 at ahc0 channel 0: 16 targets
ahc0: target 6 using 16Bit transfers
ahc0: target 6 synchronous at 10.0MHz, offset = 0x8
sd0 at scsibus0 targ 6 lun 0: <QUANTUM, QM39100TD-SW, N1B0> SCSI2 0/direct fixed
sd0: 8683MB, 8057 cyl, 10 head, 220 sec, 512 bytes/sect x 17783249 sectors
fxp0 at pci0 dev 13 function 0: Intel EtherExpress Pro 10+/100B Ethernet
fxp0: interrupting at irq 5
fxp0: Ethernet address 00:10:5c:ab:02:fb
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff: using exception 16
vt0 at isa0 port 0x60-0x6f irq 1
vt0: unknown s3, 80 col, color, 4 scr, mf2-kbd, [R3.32]
vt0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
biomask 1440 netmask 1460 ttymask 14e2
disklabel: BIOS sees chs 8057/10/220 as 1102/256/63
boot device: sd0
root on sd0a dumps on sd0b
disklabel: BIOS sees chs 8057/10/220 as 1102/256/63
disklabel: BIOS sees chs 8057/10/220 as 1102/256/63
disklabel: BIOS sees chs 8057/10/220 as 1102/256/63
root file system type: ffs