Subject: Re: Disklabel on large (>8gig) disks
To: Stuart Brooks <stuartb@cat.co.za>
From: Frederick Bruckman <fb@enteract.com>
List: port-i386
Date: 02/26/2000 12:13:53
On Fri, 25 Feb 2000, Stuart Brooks wrote:
> I would really appreciate any help on this. Is there a way to detect drive
> size past 8 gig and if so, can one use disklabel to set the disk size past 8
> gig?
>
> Thanks
> Stuart
>
> Drive = IBM 20.3 GB
> Model DJNA-352030
For what it's worth, when applying the prototype disklabel for the
following disk, only the first four partitions would take. After
rebooting and reapplying repeatedly, they all took eventually. This is
with 1.4.2_ALPHA. Wierd.
# /dev/rwd1d:
type: unknown
disk: Maxtor 92049U6
label: fictitious
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 16
sectors/cylinder: 1008
cylinders: 16383
total sectors: 40026672
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0 # milliseconds
track-to-track seek: 0 # milliseconds
drivedata: 0
8 partitions:
# size offset fstype [fsize bsize cpg]
a: 907137 63 4.2BSD 1024 8192 16 # (Cyl. 0*- 899)
b: 403200 907200 swap # (Cyl. 900 - 1299)
c: 40026609 63 unused 0 0 # (Cyl. 0*- 39708)
d: 40026672 0 unused 0 0 # (Cyl. 0 - 39708)
e: 1008000 1310400 4.2BSD 1024 8192 16 # (Cyl. 1300 - 2299)
f: 5040000 2318400 4.2BSD 1024 8192 16 # (Cyl. 2300 - 7299)
g: 5040000 7358400 4.2BSD 1024 8192 16 # (Cyl. 7300 - 12299)
h: 27628272 12398400 4.2BSD 1024 8192 16 # (Cyl. 12300 - 39708)