Subject: Cardbus Problems on new Dell Latitude CPx
To: None <port-i386@netbsd.org>
From: Paul J. Lavoie <pjl@ilx.com>
List: port-i386
Date: 05/02/2000 13:06:51
Just got a new Dell laptop, in an attempt to get a better X environment, and
am finding that the CardBus slots are not being terribly cooperative with
NetBSD.
Attempts to access a Dell-branded 3com Fast Ethernet PC Card, or a 3com
Regular Ethernet III card hang the kernel until the card is ejected, at which
point normal processing resumes. The cards work find on the previous
generation of Dell Latitude notebooks.
Hoping that it was just something with the INSTALL kernel, managed to get an
older install floppy with the kernel I had been successfully using on the
older machine, without much luck. The kernel msgbuf follows. The error
messages from detaching are in the output.
Any suggestions?
-pjl
=================
NetBSD 1.4X (LatInstall) #1: Tue May 2 12:12:13 EDT 2000
pjl@pinky:/usr/src/sys/arch/i386/compile/LatInstall
cpu0: family 6 model 8 step 1
cpu0: Intel Pentium III (E) (686-class)
total memory = 127 MB
avail memory = 112 MB
using 1658 buffers containing 6632 KB of memory
BIOS32 rev. 0 found at 0xffe90
PCI BIOS rev. 2.1 found at 0xfc0ce
pcibios: config mechanism [1][x], special cycles [x][x], last bus 1
PCI IRQ Routing Table rev. 1.0 found at 0xfbd70, size 128 bytes (6 entries)
PCI Interrupt Router at 000:07:0 (Intel 82371MX Mobile PCI I/O IDE Xcelerator
(MPIIX))
PIR Entry 0:
Bus: 0 Device: 7
INTA: link 0x00 bitmap 0x0000
INTB: link 0x00 bitmap 0x0000
INTC: link 0x00 bitmap 0x0000
INTD: link 0x63 bitmap 0xdef8
PIR Entry 1:
Bus: 1 Device: 0
INTA: link 0x60 bitmap 0xdef8
INTB: link 0x61 bitmap 0xdef8
INTC: link 0x00 bitmap 0x0000
INTD: link 0x00 bitmap 0x0000
PIR Entry 2:
Bus: 0 Device: 3
INTA: link 0x63 bitmap 0xdef8
INTB: link 0x63 bitmap 0xdef8
INTC: link 0x00 bitmap 0x0000
INTD: link 0x00 bitmap 0x0000
PIR Entry 3:
Bus: 0 Device: 8
INTA: link 0x61 bitmap 0xdef8
INTB: link 0x61 bitmap 0xdef8
INTC: link 0x00 bitmap 0x0000
INTD: link 0x00 bitmap 0x0000
PIR Entry 4:
Bus: 0 Device: 13
INTA: link 0x62 bitmap 0xdef8
INTB: link 0x00 bitmap 0x0000
INTC: link 0x00 bitmap 0x0000
INTD: link 0x00 bitmap 0x0000
PIR Entry 5:
Bus: 0 Device: 17
INTA: link 0x62 bitmap 0xdef8
INTB: link 0x62 bitmap 0xdef8
INTC: link 0x62 bitmap 0xdef8
INTD: link 0x62 bitmap 0xdef8
pciintr_link_fixup: PIRQ 0 already connected to IRQ 11
pciintr_link_fixup: PIRQ 3 already connected to IRQ 11
pciintr_link_fixup: PIRQ 1 already connected to IRQ 5
pciintr_link_fixup: PIRQ 2 not connected
pciintr_link_fixup: assigning IRQ 5 to PIRQ 2
--------------------------------------------
device vendor product pin PIRQ IRQ stage
--------------------------------------------
000:03:0 0x104c 0xac1c A 0x03 11 0
000:03:1 0x104c 0xac1c A 0x03 11 0
000:07:2 0x8086 0x7112 D 0x03 11 0
000:08:0 0x125d 0x1998 A 0x01 05 0
--------------------------------------------
PCI bridge 0: primary 0, secondary 1, subordinate 1
PCI bridge 1: primary 0, secondary 2, subordinate 2
PCI bridge 2: primary 0, secondary 3, subordinate 3
PCI bus #3 is the last bus
mainbus0 (root)
pnpbios0 at mainbus0: nodes 15, max len 248
pnpbios0: not docked
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443BX Host Bridge/Controller (rev. 0x03)
ppb0 at pci0 dev 1 function 0: Intel 82443BX AGP Interface (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: ATI Technologies product 0x4c4d (rev. 0x64)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
cbb0 at pci0 dev 3 function 0: Texas Instruments PCI1225 PCI-CardBus Bridge
(rev. 0x01)
cbb1 at pci0 dev 3 function 1: Texas Instruments PCI1225 PCI-CardBus Bridge
(rev. 0x01)
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
pciide0 at pci0 dev 7 function 1: Intel 82371AB IDE controller (PIIX4)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <IBM-DARA-218000>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 17301 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 35433216 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
atapibus0 at pciide0 channel 1
cd0 at atapibus0 drive 0: <SAMSUNG CD-ROM SN-124, , S004> type 5 cdrom
removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
uhci0 at pci0 dev 7 function 2: Intel 82371AB USB Host Controller (PIIX4)
(rev. 0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge,
revision 0x03) at pci0 dev 7 function 3 not configured
ESS Technology Inc product 0x1998 (audio multimedia, revision 0x10) at pci0
dev 8 function 0 not configured
cbb0: interrupting at irq 11
cbb0: cacheline 0x8 lattimer 0x20
cbb0: bhlc 0x822008 lscp 0x20020200
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
cbb1: interrupting at irq 11
cbb1: cacheline 0x8 lattimer 0x20
cbb1: bhlc 0x822008 lscp 0x20030300
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x8, lattimer 0x20
pcmcia1 at cardslot1
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
apm0 at mainbus0: Power Management spec V1.2
biomask ef6d netmask ef6d ttymask ffef
md0: internal 1536K image area
IPsec: Initialized Security Association Processing.
cbb0: bad Vcc request. sock_ctrl 0x30, sock_status 0x30000b20
boot device: fd0
root on md0a dumps on md0b
root file system type: ffs
cbb1: bad Vcc request. sock_ctrl 0x30, sock_status 0x30000b20
>From Etherlink III card:
pcic_wait_ready: ready never happened, status = 4c
cbb1: bad Vcc request. sock_ctrl 0x0, sock_status 0x30000382
Kernel Config File:
# $NetBSD: GENERIC,v 1.328 2000/04/21 17:52:06 explorer Exp $
#
# GENERIC -- everything that's currently supported
#
include "arch/i386/conf/std.i386"
# Enable the hooks used for initializing the root memory-disk.
options MEMORY_DISK_HOOKS
options MEMORY_DISK_IS_ROOT # force root on memory disk
options MEMORY_DISK_SERVER=0 # no userspace memory disk support
options MINIROOTSIZE=3072 # size of memory disk, in blocks
#options MINIROOTSIZE=2880 # 1.44M, same as a floppy
makeoptions COPTS="-Os" # generates smaller code than -O2, -O1
#ident "GENERIC-$Revision: 1.328 $"
maxusers 32 # estimated number of users
# Kernel changes
options SETUIDSCRIPTS
options NMBCLUSTERS=2048
#options NKMEMCLUSTERS="(2 * 6 * 1024 * 1024 / CLBYTES)"
# CPU support. At least one is REQUIRED.
options I386_CPU
options I486_CPU
options I586_CPU
options I686_CPU
# CPU-related options.
options MATH_EMULATE # floating point emulation
#options VM86 # virtual 8086 emulation
#options USER_LDT # user-settable LDT; used by WINE
# eliminate delay no-ops in I/O; recommended on all but very old machines
#options DUMMY_NOPS
# delay between "rebooting ..." message and hardware reset, in milliseconds
#options CPURESET_DELAY=2000
# Misc. i386-specific options
#options XSERVER # X server support in console drivers
#options XSERVER_DDB # PF12 gets you into DDB when X is running
# This option allows you to force a serial console at the specified
# I/O address. see console(4) for details.
#options "CONSDEVNAME=\"com\"",CONADDR=0x2f8,CONSPEED=57600
# you don't want the option below ON iff you are using the
# serial console option of the new boot strap code.
#options CONS_OVERRIDE # Always use above! independent of boot info
# The following options override the memory sizes passed in from the boot
# block. Use them *only* if the boot block is unable to determine the correct
# values. Note that the BIOS may *correctly* report less than 640k of base
# memory if the extended BIOS data area is located at the top of base memory
# (as is the case on most recent systems).
#options REALBASEMEM=639 # size of base memory (in KB)
#options REALEXTMEM=15360 # size of extended memory (in KB)
# Standard system options
options UCONSOLE # users can use TIOCCONS (for xconsole)
options INSECURE # disable kernel security levels
options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
options NTP # NTP phase/frequency locked loop
options KTRACE # system call tracing via ktrace(1)
options SYSVMSG # System V-like message queues
options SYSVSEM # System V-like semaphores
options SYSVSHM # System V-like memory sharing
#options SHMMAXPGS=1024 # 1024 pages is the default
options LKM # loadable kernel modules
# Diagnostic/debugging support options
options DIAGNOSTIC # cheap kernel consistency checks
#options DEBUG # expensive debugging checks/support
#options KMEMSTATS # kernel memory statistics (vmstat -m)
options DDB # in-kernel debugger
#options DDB_HISTORY_SIZE=100 # enable history editing in DDB
#options KGDB # remote debugger
#options "KGDB_DEVNAME=\"com\"",KGDBADDR=0x3f8,KGDBRATE=9600
#makeoptions DEBUG="-g" # compile full symbol table
# Compatibility options
#options COMPAT_NOMID # compatibility with 386BSD, BSDI, NetBSD 0.8,
#options COMPAT_09 # NetBSD 0.9,
#options COMPAT_10 # NetBSD 1.0,
#options COMPAT_11 # NetBSD 1.1,
#options COMPAT_12 # NetBSD 1.2,
#options COMPAT_13 # NetBSD 1.3,
options COMPAT_14 # NetBSD 1.4,
options COMPAT_43 # and 4.3BSD
options COMPAT_386BSD_MBRPART # recognize old partition ID
#options COMPAT_SVR4 # binary compatibility with SVR4
#options COMPAT_IBCS2 # binary compatibility with SCO and ISC
#options COMPAT_LINUX # binary compatibility with Linux
#options COMPAT_FREEBSD # binary compatibility with FreeBSD
#options COMPAT_AOUT # binary compat for NetBSD a.out binaries
# File systems
file-system FFS # UFS
file-system EXT2FS # second extended file system (linux)
file-system LFS # log-structured file system
file-system MFS # memory file system
file-system NFS # Network File System client
file-system NTFS # Windows/NT file system (experimental)
file-system CD9660 # ISO 9660 + Rock Ridge file system
file-system MSDOSFS # MS-DOS file system
file-system FDESC # /dev/fd
file-system KERNFS # /kern
file-system NULLFS # loopback file system
file-system OVERLAY # overlay file system
file-system PORTAL # portal filesystem (still experimental)
file-system PROCFS # /proc
file-system UMAPFS # NULLFS + uid and gid remapping
file-system UNION # union file system
#file-system CODA # Coda File System; also needs vcoda (below)
# File system options
options QUOTA # UFS quotas
#options FFS_EI # FFS Endian Independent support
#options SOFTDEP # FFS soft updates support.
options NFSSERVER # Network File System server
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
# immutable) behave as system flags.
# Pull in config fragments for kernel crypto. This is required for
# options IPSEC etc. to work. If you want to run with IPSEC, uncomment
# one of these, based on whether you use crypto-us or crypto-intl, and
# adjust the prefixes as necessary.
prefix ../crypto-us/sys
cinclude "conf/files.crypto-us"
prefix
#prefix ../crypto-intl/sys
#cinclude "conf/files.crypto-intl"
#prefix
# Networking options
#options GATEWAY # packet forwarding
options INET # IP + ICMP + TCP + UDP
options INET6 # IPV6
options IPSEC # IP security
options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
options IPSEC_DEBUG # debug for IP security
options MROUTING # IP multicast routing
options NS # XNS
#options NSIP # XNS tunneling over IP
options ISO,TPIP # OSI
options EON # OSI tunneling over IP
options CCITT,LLC,HDLC # X.25
options NETATALK # AppleTalk networking protocols
options PPP_BSDCOMP # BSD-Compress compression support for PPP
options PPP_DEFLATE # Deflate compression support for PPP
options PPP_FILTER # Active filter support for PPP (requires bpf)
options PFIL_HOOKS # pfil(9) packet filter hooks
options IPFILTER_LOG # ipmon(8) log support
# Compatibility with 4.2BSD implementation of TCP/IP. Not recommended.
#options TCP_COMPAT_42
# These options enable verbose messages for several subsystems.
# Warning, these may compile large string tables into the kernel!
options EISAVERBOSE # verbose EISA device autoconfig messages
options PCIVERBOSE # verbose PCI device autoconfig messages
#options PCI_CONFIG_DUMP # verbosely dump PCI config space
options PCMCIAVERBOSE # verbose PCMCIA configuration messages
options SCSIVERBOSE # human readable SCSI error messages
options USBVERBOSE # verbose USB device autoconfig messages
#options PNPBIOSVERBOSE # verbose PnP BIOS messages
options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
#
# wscons options
#
# builtin terminal emulations
#options WSEMUL_SUN # sun terminal emulation
options WSEMUL_VT100 # VT100 / VT220 emulation
# different kernel output - see dev/wscons/wsdisplayvar.h
options WS_KERNEL_FG=WSCOL_GREEN
#options WS_KERNEL_BG=WSCOL_BLACK
# compatibility to other console drivers
options WSDISPLAY_COMPAT_PCVT # emulate some ioctls
options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls
options WSDISPLAY_COMPAT_USL # VT handling
options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
# see dev/pckbc/wskbdmap_mfii.c for implemented layouts
#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
# allocate a number of virtual screens at autoconfiguration time
#options WSDISPLAY_DEFAULTSCREENS=4
# use a large software cursor that doesn't blink
options PCDISPLAY_SOFTCURSOR
# Kernel root file system and dump configuration.
config netbsd root on ? type ?
#config netbsd root on sd0a type ffs
#config netbsd root on ? type nfs
#
# Device configuration
#
mainbus0 at root
apm0 at mainbus0 # Advanced power management
# Tuning for power management, see apm(4) for more details.
#options APM_NO_IDLE # Don't call BIOS CPU idle function
#options APM_V10_ONLY # Use only the APM 1.0 calls
#options APM_NO_POWEROFF # Don't power off on halt(8)
options APM_NO_POWER_PRINT # Don't print stats on the console
options APM_DISABLE_INTERRUPTS=0 # Don't disable interrupts
# Basic Bus Support
# PCI bus support
pci* at mainbus? bus ?
pci* at pchb? bus ?
pci* at ppb? bus ?
# Configure PCI using BIOS information
options PCIBIOS # PCI BIOS support
options PCIBIOSVERBOSE # PCI BIOS verbose info
options PCIBIOS_INTR_FIXUP # fixup PCI interrupt routing
options PCIINTR_DEBUG # super-verbse PCI interrupt fixup
options PCIBIOS_BUS_FIXUP # fixup PCI bus numbering
# PCI bridges
pchb* at pci? dev ? function ? # PCI-Host bridges
pceb* at pci? dev ? function ? # PCI-EISA bridges
pcib* at pci? dev ? function ? # PCI-ISA bridges
ppb* at pci? dev ? function ? # PCI-PCI bridges
# XXX 'puc's aren't really bridges, but there's no better place for them here
puc* at pci? dev ? function ? # PCI "universal" comm. cards
# EISA bus support
eisa* at mainbus?
eisa* at pceb?
# ISA bus support
isa* at mainbus?
isa* at pceb?
isa* at pcib?
# PCMCIA bus support
pcmcia* at pcic? controller ? socket ?
pcmcia* at tcic? controller ? socket ?
# ISA PCMCIA controllers
pcic0 at isa? port 0x3e0 iomem 0xd0000 iosiz 0x10000
pcic1 at isa? port 0x3e2 iomem 0xe0000 iosiz 0x4000
tcic0 at isa? port 0x240 iomem 0xd0000 iosiz 0x10000
# PCI PCMCIA controllers
pcic0 at pci? dev? function ?
# ISA Plug-and-Play bus support
isapnp0 at isa?
# ISA Plug-and-Play PCMCIA controllers
pcic* at isapnp?
# CardBus bus support
cbb* at pci? dev ? function ?
cardslot* at cbb?
cardbus* at cardslot?
pcmcia* at cardslot?
# Coprocessor Support
# Math Coprocessor support
npx0 at isa? port 0xf0 irq 13 # x86 math coprocessor
# Console Devices
# ISA console. You can only configure one of these!
#pc0 at isa? port 0x60 irq 1 # pccons generic PC console driver
#vt0 at isa? port 0x60 irq 1 # PCVT console driver
# Keyboard layout configuration for pccons
#options FRENCH_KBD
#options FINNISH_KBD
#options GERMAN_KBD
#options NORWEGIAN_KBD
# wscons
pckbc0 at isa? # pc keyboard controller
pckbd* at pckbc? # PC keyboard
# "opms" should not be enabled together with "pms" or "pmsi"
pms* at pckbc? # PS/2 mouse for wsmouse
pmsi* at pckbc? # PS/2 "Intelli"mouse for wsmouse
#opms* at pckbc? # backwards compatible PS/2 mouse
vga0 at isa?
vga* at pci? dev ? function ?
pcdisplay0 at isa? # CGA, MDA, EGA, HGA
wsdisplay* at vga? console ?
wsdisplay* at pcdisplay? console ?
wskbd* at pckbd? console ?
wsmouse* at pms? mux 0
wsmouse* at pmsi? mux 0
pcppi0 at isa?
sysbeep0 at pcppi?
# Serial Devices
# PCI serial interfaces
com* at puc? port ? # 16x50s on "universal" comm boards
cy* at pci? dev ? function ? # Cyclades Cyclom-Y serial boards
# ISA Plug-and-Play serial interfaces
com* at isapnp? # Modems and serial boards
# PCMCIA serial interfaces
com* at pcmcia? function ? # Modems and serial cards
pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards
com* at pcmcom? slave ? # ...and the slave devices
# CardBus serial interfaces
com* at cardbus? function ? # Modems and serial cards
# ISA serial interfaces
#options COM_HAYESP # adds Hayes ESP serial board support
com0 at isa? port 0x3f8 irq 4 # Standard PC serial ports
com1 at isa? port 0x2f8 irq 3
com2 at isa? port 0x3e8 irq 5
#com3 at isa? port 0x2e8 irq 9
#ast0 at isa? port 0x1a0 irq 5 # AST 4-port serial cards
#com* at ast? slave ?
#boca0 at isa? port 0x100 irq 5 # BOCA 8-port serial cards
#boca0 at isa? port 0x100 irq 5 # BOCA 16-port serial cards (BB2016)
#boca1 at isa? port 0x140 irq 5 # this line is also needed for BB2016
#com* at boca? slave ?
#tcom0 at isa? port 0x100 irq 7 # TC-800 8-port serial cards
#com* at tcom? slave ?
#rtfps0 at isa? port 0x1230 irq 10 # RT 4-port serial cards
#com* at rtfps? slave ?
cy0 at isa? iomem 0xd4000 irq 10 # Cyclades serial cards
addcom0 at isa? port 0x108 irq 5 # Addonics FlexPort 8S
com* at addcom? slave ?
# Parallel Printer Interfaces
# PCI parallel printer interfaces
lpt* at puc? port ? # || ports on "universal" comm boards
# ISA parallel printer interfaces
lpt0 at isa? port 0x378 irq 7 # standard PC parallel ports
lpt1 at isa? port 0x278
lpt2 at isa? port 0x3bc
# LM7[89] and compatible hardware monitors
#lm0 at isa? port 0x290 # other common ports: 0x280, 0x310
# SCSI Controllers and Devices
# PCI SCSI controllers
adv* at pci? dev ? function ? # AdvanSys 1200[A,B], 9xx[U,UA] SCSI
adw* at pci? dev ? function ? # AdvanSys 9xxUW SCSI
ahc* at pci? dev ? function ? # Adaptec [23]94x, aic78x0 SCSI
bha* at pci? dev ? function ? # BusLogic 9xx SCSI
dpt* at pci? dev ? function ? # DPT SmartCache/SmartRAID
isp* at pci? dev ? function ? # Qlogic ISP [12]0x0 SCSI/FibreChannel
ncr* at pci? dev ? function ? # NCR 53c8xx SCSI
pcscp* at pci? dev ? function ? # AMD 53c974 PCscsi-PCI SCSI
# EISA SCSI controllers
ahb* at eisa? slot ? # Adaptec 174[02] SCSI
ahc* at eisa? slot ? # Adaptec 274x, aic7770 SCSI
bha* at eisa? slot ? # BusLogic 7xx SCSI
dpt* at eisa? slot ? # DPT EATA SCSI
uha* at eisa? slot ? # UltraStor 24f SCSI
# PCMCIA SCSI controllers
aic* at pcmcia? function ? # Adaptec APA-1460 SCSI
esp* at pcmcia? function ? # Qlogic ESP406/FAS408 SCSI
# ISA Plug-and-Play SCSI controllers
aha* at isapnp? # Adaptec AHA-154[02
aic* at isapnp? # Adaptec AHA-1520B
# ISA SCSI controllers
adv0 at isa? port ? irq ? drq ? # AdvanSys APB-514[02]
aha0 at isa? port 0x330 irq ? drq ? # Adaptec 154[02] SCSI
aha1 at isa? port 0x334 irq ? drq ?
ahc0 at isa? port ? irq ? # Adaptec 284x SCSI
aic0 at isa? port 0x340 irq 11 # Adaptec 152[02] SCSI
bha0 at isa? port 0x330 irq ? drq ? # BusLogic [457]4X SCSI
bha1 at isa? port 0x334 irq ? drq ?
# The "nca" and "dpt" probes might give false hits or hang your machine.
#dpt0 at isa? port 0x170 irq ? drq ? # DPT SmartCache/SmartRAID
#nca0 at isa? port 0x360 irq 15 # Port-mapped NCR 53C80 contoller
#nca1 at isa? iomem 0xd8000 irq 5 # Memory-mapped controller (T128, etc.)
sea0 at isa? iomem 0xc8000 irq 5 # Seagate/Future Domain SCSI
uha0 at isa? port 0x330 irq ? drq ? # UltraStor [13]4f SCSI
uha1 at isa? port 0x340 irq ? drq ?
wds0 at isa? port 0x350 irq 15 drq 6 # WD7000 and TMC-7000 controllers
wds1 at isa? port 0x358 irq 11 drq 5
# CardBus SCSI cards
ahc* at cardbus? dev ? function ? # Adaptec ADP-1480
# SCSI bus support
scsibus* at adv?
scsibus* at adw?
scsibus* at aha?
scsibus* at ahb?
scsibus* at ahc?
scsibus* at aic?
scsibus* at bha?
scsibus* at dpt?
scsibus* at esp?
scsibus* at isp?
#scsibus* at nca?
scsibus* at ncr?
scsibus* at pcscp?
scsibus* at sea?
scsibus* at uha?
scsibus* at wds?
# SCSI devices
sd* at scsibus? target ? lun ? # SCSI disk drives
st* at scsibus? target ? lun ? # SCSI tape drives
cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
ch* at scsibus? target ? lun ? # SCSI autochangers
ss* at scsibus? target ? lun ? # SCSI scanners
uk* at scsibus? target ? lun ? # SCSI unknown
# RAID controllers and devices
cac* at pci? dev ? function ? # Compaq array controller
ca* at cac? unit ? # Compaq array disk device
# IDE and related devices
# PCI IDE controllers - see pciide(4) for supported hardware.
# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
# how to set up DMA modes for this chip. This may work, or may cause
# a machine hang with some controllers.
pciide* at pci? dev ? function ? flags 0x0000
# ISA Plug-and-Play IDE controllers
wdc* at isapnp?
# PCMCIA IDE controllers
wdc* at pcmcia? function ?
# ISA ST506, ESDI, and IDE controllers
# Use flags 0x01 if you want to try to use 32bits data I/O (the driver will
# fall back to 16bits I/O if 32bits I/O are not functional).
# Some controllers pass the initial 32bit test, but will fail later.
wdc0 at isa? port 0x1f0 irq 14 flags 0x00
wdc1 at isa? port 0x170 irq 15 flags 0x00
# IDE drives
# Flags are used only with controllers that support DMA operations
# and mode settings (e.g. some pciide controllers)
# The lowest order four bits (rightmost digit) of the flags define the PIO
# mode to use, the next set of four bits the DMA mode and the third set the
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
# to use, and the last bit must be 1 for this setting to be used.
# For DMA and UDMA, 0xf (1111) means 'disable'.
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
# (0xc=1100, 0xa=1010, 0xf=1111)
# 0x0000 means "use whatever the drive claims to support".
wd* at wdc? channel ? drive ? flags 0x0000
wd* at pciide? channel ? drive ? flags 0x0000
# ATAPI bus support
atapibus* at wdc? channel ?
atapibus* at pciide? channel ?
# ATAPI devices
# flags have the same meaning as for IDE drives.
cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives
sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown
# Miscellaneous mass storage devices
# ISA floppy
fdc0 at isa? port 0x3f0 irq 6 drq 2 # standard PC floppy controllers
#fdc1 at isa? port 0x370 irq ? drq ?
fd* at fdc? drive ? # the drives themselves
# some machines need you to do this instead of fd*
#fd0 at fdc0 drive 0
# ISA CD-ROM devices
#mcd0 at isa? port 0x300 irq 10 # Mitsumi CD-ROM drives
# ISA tape devices
# note: the wt driver conflicts unpleasantly with SMC boards at the
# same I/O address. The probe reprograms their EEPROMs. Don't
# uncomment it unless you are actually using it.
#wt0 at isa? port 0x308 irq 5 drq 1 # Archive and Wangtek QIC tape drives
# Network Interfaces
# PCI network interfaces
de* at pci? dev ? function ? # DEC 21x4x-based Ethernet
en* at pci? dev ? function ? # ENI/Adaptec ATM
ep* at pci? dev ? function ? # 3Com 3c59x
ex* at pci? dev ? function ? # 3Com 90x[B]
epic* at pci? dev ? function ? # SMC EPIC/100 Ethernet
esh* at pci? dev ? function ? # Essential HIPPI card
fpa* at pci? dev ? function ? # DEC DEFPA FDDI
fxp* at pci? dev ? function ? # Intel EtherExpress PRO 10+/100B
le* at pci? dev ? function ? # PCnet-PCI Ethernet
ne* at pci? dev ? function ? # NE2000-compatible Ethernet
ntwoc* at pci? dev ? function ? # Riscom/N2 PCI Sync Serial
sip* at pci? dev ? function ? # SiS 900 Ethernet
tl* at pci? dev ? function ? # ThunderLAN-based Ethernet
tlp* at pci? dev ? function ? # DECchip 21x4x (and clones) Ethernet
options TLP_MATCH_21040
options TLP_MATCH_21041
options TLP_MATCH_21140
options TLP_MATCH_21142
vr* at pci? dev ? function ? # VIA Rhine Fast Ethernet
lmc* at pci? dev ? function ? # Lan Media Corp SSI/HSSI/DS3
rtk* at pci? dev ? function ? # Realtek 8129/8139
# EISA network interfaces
ep* at eisa? slot ? # 3Com 3c579 Ethernet
fea* at eisa? slot ? # DEC DEFEA FDDI
tlp* at eisa? slot ? # DEC DE-425 Ethernet
# ISA Plug-and-Play network interfaces
ep* at isapnp? # 3Com 3c509 Ethernet
ne* at isapnp? # NE2000-compatible Ethernet
tr* at isapnp? # IBM/3COM TROPIC Token-Ring
# PCMCIA network interfaces
awi* at pcmcia? function ? # BayStack 650/660 (802.11FH/DS)
cnw* at pcmcia? function ? # Xircom/Netwave AirSurfer
ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet
mbe* at pcmcia? function ? # MB8696x based Ethernet
ne* at pcmcia? function ? # NE2000-compatible Ethernet
ray* at pcmcia? function ? # Raytheon Raylink (802.11)
sm* at pcmcia? function ? # Megahertz Ethernet
wi* at pcmcia? function ? # Lucent WaveLan IEEE (802.11)
xe* at pcmcia? function ? # Xircom PCMCIA cards
mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards
com* at mhzc?
sm* at mhzc?
# ISA network interfaces
ate0 at isa? port 0x2a0 irq ? # AT1700
cs0 at isa? port 0x300 iomem ? irq ? drq ? # CS8900 Ethernet
ec0 at isa? port 0x250 iomem 0xd8000 irq 9 # 3Com 3c503 Ethernet
eg0 at isa? port 0x280 irq 9 # 3C505 ethernet cards
el0 at isa? port 0x300 irq 9 # 3C501 ethernet cards
ep0 at isa? port ? irq ? # 3C509 ethernet cards
ef0 at isa? port 0x360 iomem 0xd0000 irq 7 # 3C507
ai0 at isa? port 0x360 iomem 0xd0000 irq 7 # StarLAN
fmv0 at isa? port 0x2a0 irq ? # FMV-180 series
ix0 at isa? port 0x300 irq 10 # EtherExpress/16
iy0 at isa? port 0x360 irq ? # EtherExpress PRO 10 ISA
lc0 at isa? port 0x320 iomem ? irq ? # DEC EtherWORKS III (LEMAC)
#depca0 at isa? port 0x300 iomem 0xc8000 iosiz 0x8000 irq 5 # DEPCA
#le* at depca?
nele0 at isa? port 0x320 irq 9 drq 7 # NE2100
#ntwoc0 at isa? port 0x300 irq 5 iomem 0xc8000 flags 1 # Riscom/N2 sync serial
le* at nele?
bicc0 at isa? port 0x320 irq 10 drq 7 # BICC IsoLan
le* at bicc?
ne0 at isa? port 0x280 irq 9 # NE[12]000 ethernet cards
ne1 at isa? port 0x300 irq 10
sm0 at isa? port 0x300 irq 10 # SMC91C9x Ethernet
tr0 at isa? port 0xa20 iomem 0xd8000 irq ? # IBM TROPIC based Token-Ring
tr1 at isa? port 0xa24 iomem 0xd0000 irq ? # IBM TROPIC based Token-Ring
tr* at isa? port ? irq ? # 3COM TROPIC based Token-Ring
we0 at isa? port 0x280 iomem 0xd0000 irq 9 # WD/SMC Ethernet
we1 at isa? port 0x300 iomem 0xcc000 irq 10
# CardBus network cards
ex* at cardbus? dev ? function ? # 3Com 3C575TX
fxp* at cardbus? dev ? function ? # Intel i8255x
tlp* at cardbus? dev ? function ? # DECchip 21143
rtk* at cardbus? dev ? function ? # Realtek 8129/8139
# MII/PHY support
exphy* at mii? phy ? # 3Com internal PHYs
icsphy* at mii? phy ? # Integrated Circuit Systems ICS1890
inphy* at mii? phy ? # Intel 82555 PHYs
iophy* at mii? phy ? # Intel 82553 PHYs
lxtphy* at mii? phy ? # Level One LXT-970 PHYs
nsphy* at mii? phy ? # NS83840 PHYs
nsphyter* at mii? phy ? # NS83843 PHYs
qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs
sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs
tlphy* at mii? phy ? # ThunderLAN PHYs
tqphy* at mii? phy ? # TDK Semiconductor PHYs
ukphy* at mii? phy ? # generic unknown PHYs
# USB Controller and Devices
# PCI USB controllers
uhci* at pci? dev ? function ? # Universal Host Controller (Intel)
ohci* at pci? dev ? function ? # Open Host Controller
# CardBus USB controllers
ohci* at cardbus? dev ? function ? # Open Host Controller
# USB bus support
usb* at uhci?
usb* at ohci?
# USB Hubs
uhub* at usb?
uhub* at uhub? port ? configuration ? interface ?
# USB Mice
ums* at uhub? port ? configuration ? interface ?
wsmouse* at ums? mux 0
# USB Keyboards
ukbd* at uhub? port ? configuration ? interface ?
wskbd* at ukbd? console ? mux 1
# USB Generic HID devices
uhid* at uhub? port ? configuration ? interface ?
# USB Printer
ulpt* at uhub? port ? configuration ? interface ?
# USB Modem
umodem* at uhub? port ? configuration ?
ucom* at umodem?
# USB Mass Storage
umass* at uhub? port ? configuration ? interface ?
atapibus* at umass? channel ?
scsibus* at umass? channel ?
# USB audio
uaudio* at uhub? port ? configuration ?
# USB Ethernet adapters
aue* at uhub? port ? # ADMtek AN986 Pegasus based adapters
cue* at uhub? port ? # CATC USB-EL1201A based adapters
kue* at uhub? port ? # Kawasaki LSI KL5KUSB101B based adapters
# Prolofic PL2301/PL2302 host-to-host adapter
upl* at uhub? port ?
# Serial adapters
# FTDI FT8U100AX serial adapter
uftdi* at uhub? port ?
ucom* at uftdi? portno ?
# Diamond Multimedia Rio 500
urio* at uhub? port ?
# USB Handspring Visor
uvisor* at uhub? port ?
ucom* at uvisor?
# USB Generic driver
ugen* at uhub? port ?
# Plug-and-Play BIOS and attached devices
pnpbios0 at mainbus0
# mainboard audio chips
ess* at pnpbios0 index ? # ESS AudioDrive
sb* at pnpbios0 index ? # NeoMagic 256AV in sb mode
wss* at pnpbios0 index ? # NeoMagic 256AV in wss mode
ym* at pnpbios0 index ? # OPL3-SA3
# com port
#com* at pnpbios0 index ?
# parallel port
#lpt* at pnpbios0 index ?
# IDE controller on Toshiba Portege 3000 series (crippled PCI device)
#pciide* at pnpbios0 index ?
# Audio Devices
# PCI audio devices
auvia* at pci? dev ? function ? # VIA VT82C686A integrated AC'97 Audio
clcs* at pci? dev ? function ? # Cirrus Logic CS4280
eap* at pci? dev ? function ? # Ensoniq AudioPCI
eso* at pci? dev ? function ? # ESS Solo-1 PCI AudioDrive
fms* at pci? dev ? function ? # Forte Media FM801
#sbl* at pci? dev ? function ? # SoundBlaster Live!
sv* at pci? dev ? function ? # S3 SonicVibes
# ISA Plug-and-Play audio devices
ess* at isapnp? # ESS Tech ES1887, ES1888, ES888 audio
guspnp* at isapnp? # Gravis Ultra Sound PnP audio
sb* at isapnp? # SoundBlaster-compatible audio
wss* at isapnp? # Windows Sound System
ym* at isapnp? # Yamaha OPL3-SA3 audio
# ISA audio devices
# the "aria" probe might give false hits
#aria0 at isa? port 0x290 irq 10 # Aria
#ess0 at isa? port 0x220 irq 5 drq 1 drq2 5 # ESS 18XX
gus0 at isa? port 0x220 irq 7 drq 1 drq2 6 # Gravis Ultra Sound
pas0 at isa? port 0x220 irq 7 drq 1 # ProAudio Spectrum
pss0 at isa? port 0x220 irq 7 drq 6 # Personal Sound System
sp0 at pss0 port 0x530 irq 10 drq 0 # sound port driver
sb0 at isa? port 0x220 irq 5 drq 1 drq2 5 # SoundBlaster
wss0 at isa? port 0x530 irq 10 drq 0 drq2 1 # Windows Sound System
# OPL[23] FM synthesizers
#opl0 at isa? port 0x388 # use only if not attached to sound card
opl* at eso?
opl* at ess?
opl* at fms?
opl* at sb?
opl* at sv?
opl* at wss?
opl* at ym?
# Audio support
#audio* at aria?
audio* at auvia?
audio* at clcs?
audio* at eap?
audio* at eso?
audio* at ess?
audio* at fms?
audio* at gus?
audio* at guspnp?
audio* at pas?
audio* at sb?
#audio* at sbl?
audio* at sp?
audio* at sv?
audio* at uaudio?
audio* at wss?
audio* at ym?
# MPU 401 UARTs
#mpu* at isa? port 0x330 irq 9 # MPU401 or compatible card
mpu* at eso?
mpu* at fms?
mpu* at sb?
mpu* at ym?
# MIDI support
midi* at eap? # 137[01] MIDI port
midi* at mpu? # MPU 401
midi* at opl? # OPL FM synth
midi* at pcppi? # MIDI interface to the PC speaker
midi* at sb? # SB1 MIDI port
# The spkr driver provides a simple tone interface to the built in speaker.
#spkr0 at pcppi? # PC speaker
# Mice
# ISA busmice
lms0 at isa? port 0x23c irq 5 # Logitech bus mouse
lms1 at isa? port 0x238 irq 5
mms0 at isa? port 0x23c irq 5 # Microsoft InPort mouse
mms1 at isa? port 0x238 irq 5
wsmouse* at lms? mux 0
wsmouse* at mms? mux 0
# backwards compatible versions
#olms0 at isa? port 0x23c irq 5 # Logitech bus mouse
#olms1 at isa? port 0x238 irq 5
#omms0 at isa? port 0x23c irq 5 # Microsoft InPort mouse
#omms1 at isa? port 0x238 irq 5
#opms0 at pc? irq 12 # PS/2 auxiliary port mouse
#opms0 at vt? irq 12 # PS/2 auxiliary port mouse
# Joysticks
# ISA Plug-and-Play joysticks
joy* at isapnp? # Game ports (usually on audio cards)
# PCI joysticks
joy* at pci? # Game ports (usually on audio cards)
# ISA joysticks. Probe is a little strange; add only if you have one.
#joy0 at isa? port 0x201
# Miscellaneous Devices
# Planetconnect Satellite receiver driver.
#satlink0 at isa? port 0x300 drq 1
# Pull in optional local configuration
include "arch/i386/conf/GENERIC.local"
# Pseudo-Devices
# disk/mass storage pseudo-devices
pseudo-device ccd 4 # concatenated/striped disk devices
#pseudo-device raid 4 # RAIDframe disk driver
options RAID_AUTOCONFIG # auto-configuration of RAID components
pseudo-device md 1 # memory disk device (ramdisk)
pseudo-device vnd 4 # disk-like interface to files
# network pseudo-devices
pseudo-device bpfilter 8 # Berkeley packet filter
pseudo-device ipfilter # IP filter (firewall) and NAT
pseudo-device loop # network loopback
pseudo-device ppp 2 # Point-to-Point Protocol
pseudo-device sl 2 # Serial Line IP
pseudo-device strip 2 # Starmode Radio IP (Metricom)
pseudo-device tun 2 # network tunneling over tty
pseudo-device gre 2 # generic L3 over IP tunnel
pseudo-device ipip 2 # IP Encapsulation within IP (RFC 2003)
pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device faith 1 # IPv[46] tcp relay translation i/f
pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation
# miscellaneous pseudo-devices
pseudo-device pty 64 # pseudo-terminals
pseudo-device tb 1 # tablet line discipline
pseudo-device sequencer 1 # MIDI sequencer
# rnd works; RND_COM does not on port i386 yet.
pseudo-device rnd # /dev/random and in-kernel generator
#options RND_COM # use "com" randomness as well (BROKEN)
# a pseudo device needed for Coda # also needs CODA (above)
#pseudo-device vcoda 4 # coda minicache <-> venus comm.
# mouse & keyboard multiplexor pseudo-devices
pseudo-device wsmux 2
-------------------------------------------------------------------------------
Paul J. Lavoie pjl@ilx.com (212) 510-3029
ILX Systems, Inc. 111 Fulton St New York, NY 10038