On Sat, Jun 17, 2000 at 05:22:25PM +0400, AnorEXia wrote:
> no
> com3-tty03
> 
> On Sat, 17 Jun 2000, Christos Zoulas wrote:
> > AnorEXia <anorexia@telkom.net> wrote:
> > > I've just installed NetBSD 1.4.2 and since my modem wasn't recognized as
> > > isapnp device, I added the modem label(DAV0336, Davicom 33.6 PNP) to the
> > > isapnp devs list on /sys/dev/isa, recompiled and it seems ok, com3 at
> > > isapnp0, port 0x3e8...etc. Then I 've gone to /dev and sh MAKEDEV tty03. 
> > > But I can't manage to use chat, cu, minicom or
> > > 
> > > Ah, CU gives write/read error
> > > Minicom gives timeout
> > 
> > com3 == tty02
> > com4 == tty03

DOS COM4 == NetBSD com3 == NetBSD /dev/tty03

Under 1.4.2, MAKEDEV tty03 will actually create /dev/tty003, you want to
MAKEDEV tty3  (That's fixed in -current)

You probably also want an /etc/uucp/port file something like this:

port davicom
  type modem
  device /dev/tty03
  speed 115200

... if you want cu to open the port with no carrier present.

-- 
David Maxwell, david@vex.net|david@maxwell.net -->
(About an Amiga rendering landscapes) It's not thinking, it's being artistic!
					      - Jamie Woods