On Sat, Sep 02, 2000 at 12:24:38AM -0500, Peter Seebach wrote:

 > Okay, the CD doesn't work.  The ethernet doesn't work.  But if you copy all
 > the data onto a DOS-formatted VPC disk, *it does work*.

Try the "tlp" driver with it.

 > Here's dmesg output, if anyone wants it.  Anyone want a screen shot?  ;)

Screen shot would be cool.

 > NetBSD 1.5_ALPHA2 (GENERIC) #2: Mon Aug 21 19:17:53 MEST 2000
 >     fvdl@sushi:/work/trees/netbsd-1-5/sys/arch/i386/compile/GENERIC
 > cpu0: ConnectixCPU  (586-class)
 > total memory = 110 MB
 > avail memory = 99868 KB
 > using 1441 buffers containing 5764 KB of memory
 > BIOS32 rev. 0 found at 0xffe7b
 > mainbus0 (root)
 > pci0 at mainbus0 bus 0: configuration mode 1
 > pci0: i/o space, memory space enabled
 > pchb0 at pci0 dev 0 function 0
 > pchb0: Intel 82437FX System Controller (TSC) (rev. 0x00)
 > vga1 at pci0 dev 4 function 0: S3 Trio32/64 (rev. 0x00)
 > wsdisplay0 at vga1: console (80x25, vt100 emulation)
 > pcib0 at pci0 dev 7 function 0
 > pcib0: Intel 82371FB PCI-to-ISA Bridge (PIIX) (rev. 0x02)
 > pciide0 at pci0 dev 7 function 1: Intel 82371FB IDE controller (PIIX) (rev. 0x02)
 > pciide0: bus-master DMA support present
 > pciide0: primary channel wired to compatibility mode
 > atapibus0 at pciide0 channel 0
 > wd0 at pciide0 channel 0 drive 0: <CntxCorpHD>
 > wd0: drive supports 128-sector pio transfers, lba addressing
 > wd0: 2000 MB, 4064 cyl, 16 head, 63 sec, 512 bytes/sect x 4096512 sectors
 > wd0: 32-bit data port
 > wd0: drive supports PIO mode 4, DMA mode 2
 > pciide0: primary channel interrupting at irq 14
 > wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
 > pciide0: secondary channel wired to compatibility mode
 > wd1 at pciide0 channel 1 drive 0: <CntxCorpHD>
 > wd1: drive supports 128-sector pio transfers, lba addressing
 > wd1: 256 MB, 521 cyl, 16 head, 63 sec, 512 bytes/sect x 525168 sectors
 > wd1: 32-bit data port
 > wd1: drive supports PIO mode 4, DMA mode 2
 > pciide0: secondary channel interrupting at irq 15
 > wd1(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
 > ohci0 at pci0 dev 8 function 0: unknown vendor 0x2955 product 0x6e61 (rev. 0x11)
 > ohci0: interrupting at irq 9
 > ohci0: OHCI version 1.0
 > usb0 at ohci0: USB revision 1.0
 > uhub0 at usb0
 > uhub0: vendor 0x2955 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 > uhub0: 15 ports with 15 removable, self powered
 > de0 at pci0 dev 9 function 0: can't read ENET ROM (why=-3) (ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff)
 > de0: 21041 [10Mb/s] pass 1.1
 > de0: address unknown
 > isa0 at pcib0
 > com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
 > com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
 > pckbc0 at isa0 port 0x60-0x64
 > pckbd0 at pckbc0 (kbd slot)
 > pckbc0: using irq 1 for kbd slot
 > wskbd0 at pckbd0: console keyboard, using wsdisplay0
 > lpt0 at isa0 port 0x378-0x37b irq 7
 > sb0 at isa0 port 0x220-0x237 irq 5 drq 1 drq2 5: dsp v4.13
 > audio0 at sb0: full duplex, mmap, independent
 > midi0 at sb0: SB MIDI UART
 > opl0 at sb0: model OPL3
 > midi1 at opl0: SB Yamaha OPL3
 > pcppi0 at isa0 port 0x61
 > midi2 at pcppi0: PC speaker
 > sysbeep0 at pcppi0
 > isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
 > npx0 at isa0 port 0xf0-0xff: error reporting broken; not using
 > fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
 > fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
 > fd1 at fdc0 drive 1: density unknown
 > isapnp0: read port 0x203
 > isapnp0: card 1 violates PnP spec; byte 0
 > isapnp0: No current device for tag, card 1
 > isapnp0: Maximum tag size exceeded, card 1
 > isapnp0: No current device for tag, card 1
 > isapnp0: Maximum tag size exceeded, card 1
 > isapnp0: No current device for tag, card 1
 > isapnp0: Maximum tag size exceeded, card 1
 > isapnp0: No current device for tag, card 1
 > isapnp0: Maximum tag size exceeded, card 1
 > isapnp0: No current device for tag, card 1
 > isapnp0: Maximum tag size exceeded, card 1
 > isapnp0: No current device for tag, card 1
 > isapnp0: Maximum tag size exceeded, card 1
 > isapnp0: No current device for tag, card 1
 > isapnp0: Maximum tag size exceeded, card 1
 > isapnp0: No current device for tag, card 1
 > isapnp0: Maximum tag size exceeded, card 1
 > isapnp0: No current device for tag, card 1
 > isapnp0: Maximum tag size exceeded, card 1
 > isapnp0: Too many tag errors, card 1
 > biomask ff45 netmask ff45 ttymask ffc7
 > wd1: no disk label
 > boot device: wd0
 > root on wd0a dumps on wd0b
 > root file system type: ffs
 > wsdisplay0: screen 1 added (80x25, vt100 emulation)
 > wsdisplay0: screen 2 added (80x25, vt100 emulation)
 > wsdisplay0: screen 3 added (80x25, vt100 emulation)
 > wsdisplay0: screen 4 added (80x25, vt100 emulation)
 > wsmux1: connecting to wsdisplay0
 > wd1: no disk label
 > 

-- 
        -- Jason R. Thorpe <thorpej@zembu.com>