On Mon, Mar 26, 2001 at 08:15:13PM +1000, dkwok wrote:
> Ok. Getting some progress.
> 
> After doing the /sbin/ttyflags -a, I do "/usr/pkg/sbin/apcupsd -c /etc/apcupsd.conf"
> 
> after 30 second the following appear:
>  /usr/pkg/sbin/apcupsd -c /etc/apcupsd.conf &
> [1] 22619
> bash-2.04# /usr/pkg/sbin/apcupsd: v3.6.2 Andre Hedrick et al.
> /usr/pkg/sbin/apcupsd: attempting to configure UPS.
> APC      : Mar 26 20:11:50
> CABLE    : APC Cable 940-0024C
> UPSMODEL : SMART-UPS 1000
> UPSMODE  : Stand Alone
> UPSNAME  : UPS_IDEN
> REPLACE  : 09/01/00^X
> SENSE    : HIGH
> WAKEUP   : 060 Cycles
> SLEEP    : 020 Cycles
> LOTRANS  : 196.0 Volts
> HITRANS  : 280.0 Volts
> CHARGE   : 015.0 Percent
> ALARM    : Low Batt
> LOWBATT  : 02 Minutes
> DIPSW    : 0x0000
> 
> [1]+  Exit 1                  /usr/pkg/sbin/apcupsd -c /etc/apcupsd.conf
> 
> It seems to me apcupsd exited eventualy. Is there anything wrong with my command?

how does you apcupsd.conf looks ?
Did it create the /var/log/apcupsd.log and /var/run/apcupsd.status ?


--
Manuel Bouyer <bouyer@antioche.eu.org>
--