On Tue, Jul 17, 2001 at 10:36:40PM +0900, Henry Nelson wrote:

 > After doing a few tests with DOS diagnostics tools, which showed nothing
 > wrong in particular hardware-wise, I thought I'd elaborate on my previous
 > post about pciide0 with a bit of dmesg output.  Could the fxp0 problem be
 > related?

Go into your BIOS configuration menu, look for an option that has a
name like "Plug'N'Play OS", and make sure that it is disabled.

 > 
 > henry nelson
 > 
 > # dmesg
 > NetBSD 1.5.1 (PCKERN) #0: Tue Jul 17 12:11:46 JST 2001
 >     root@pc75:/usr/src/sys/arch/i386/compile/PCKERN
 > cpu0: Intel Pentium (P54C) (586-class), 99.92 MHz
 > total memory = 48768 KB
 > avail memory = 43596 KB
 > using 635 buffers containing 2540 KB of memory
 > BIOS32 rev. 0 found at 0xfdaa1
 > mainbus0 (root)
 > pci0 at mainbus0 bus 0: configuration mode 1
 > pci0: i/o space, memory space enabled
 > pchb0 at pci0 dev 0 function 0
 > pchb0: vendor 0x1045 product 0xc557 (rev. 0x11)
 > pcib0 at pci0 dev 1 function 0
 > pcib0: vendor 0x1045 product 0xc558 (rev. 0x11)
 > vga1 at pci0 dev 2 function 0: vendor 0x1023 product 0x9660 (rev. 0xd3)
 > wsdisplay0 at vga1: console (80x25, vt100 emulation)
 > fxp0 at pci0 dev 7 function 0: Intel i82557 Ethernet, rev 1
 > fxp0: couldn't map interrupt
 > pciide0 at pci0 dev 20 function 0: OPTi 82c621 PCI IDE controller (rev. 0x11)
 > pciide0: bus-master DMA support present, but unused (couldn't map registers)
 > pciide0: primary channel configured to compatibility mode
 > wd0 at pciide0 channel 0 drive 0: <WDC AC2850F>

-- 
        -- Jason R. Thorpe <thorpej@zembu.com>