Subject: AGP code
To: None <port-i386@netbsd.org>
From: Frank van der Linden <fvdl@wasabisystems.com>
List: port-i386
Date: 09/10/2001 23:45:21
--YZ5djTAD1cGYuMQK
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
As you may have noticed, added AGP code (derived from the FreeBSD code)
to the tree. It was moderately modified to use bus_dma, etc. I
have only been able to test a few chipsets, unfortunately. So if you
have a VIA, Intel, SiS or AMD chipset with AGP GART support, and
don't mind trying out a -current kernel and a small testprogram,
perhaps you could:
1) enable "agp* at pchb?" in your kernel config file
2) mail me what the bootmessages say about agp
(should be: "agp0 at pchb0: aperture at xxxx size xxxx")
3) run 'make includes' in src/sys
4) compile and run the following small testprogram.
And of course, it crashes, try go get a traceback if you can and
mail that to me..
If it fails to probe agp0, send me a dmesg output of a different,
working kernel, showing which (probed and unprobed) PCI devices
are present.
Currently, there is a problem in the i810 code causing it not
to map the graphics aperture. If you have an i810-based machine
and can test some patches, let me know.
- Frank
--
Frank van der Linden fvdl@wasabisystems.com
======================================================================
Quality NetBSD CDs, Support & Service. http://www.wasabisystems.com/
--YZ5djTAD1cGYuMQK
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="agp.c"
#include <sys/types.h>
#include <sys/ioctl.h>
#include <sys/agpio.h>
#include <fcntl.h>
#include <err.h>
int
main(int argc, char **argv)
{
int fd;
agp_info info;
agp_allocate alloc;
agp_setup setup;
agp_bind bind;
agp_unbind unbind;
fd = open("/dev/agp0", O_RDWR);
if (fd < 0)
err(1, "open");
if (ioctl(fd, AGPIOC_INFO, &info) < 0)
err(2, "ioctl AGPIOC_INFO");
printf("version: %u.%u\n", info.version.major,
info.version.minor);
printf("id: %x\n", info.bridge_id);
printf("mode: %x\n", info.agp_mode);
printf("base: %x\n", info.aper_base);
printf("size: %uM\n", info.aper_size);
printf("total mem: %u\n", info.pg_total);
printf("system mem: %u\n", info.pg_system);
printf("used mem: %u\n\n", info.pg_used);
setup.agp_mode = info.agp_mode;
if (ioctl(fd, AGPIOC_SETUP, &setup) < 0)
err(3, "ioctl AGPIOC_SETUP");
if (ioctl(fd, AGPIOC_ACQUIRE, 0) < 0)
err(3, "ioctl AGPIOC_ACQUIRE");
alloc.type = 0;
alloc.pg_count = 64;
if (ioctl(fd, AGPIOC_ALLOCATE, &alloc) < 0)
err(4, "ioctl AGPIOC_ALLOCATE");
printf("alloc key %d, paddr %x\n", alloc.key, alloc.physical);
if (ioctl(fd, AGPIOC_INFO, &info) < 0)
err(5, "ioctl AGPIOC_INFO");
bind.key = alloc.key;
bind.pg_start = 0x1000;
if (ioctl(fd, AGPIOC_BIND, &bind) < 0)
err(6, "ioctl AGPIOC_BIND");
printf("used mem now: %u\n\n", info.pg_used);
unbind.key = alloc.key;
unbind.priority = 0;
if (ioctl(fd, AGPIOC_UNBIND, &unbind) < 0)
err(6, "ioctl AGPIOC_BIND");
if (ioctl(fd, AGPIOC_DEALLOCATE, &alloc.key) < 0)
err(6, "ioctl AGPIOC_DEALLOCATE");
if (ioctl(fd, AGPIOC_RELEASE, 0) < 0)
err(7, "ioctl AGPIOC_RELEASE");
close(fd);
printf("agp test successful\n");
return 0;
}
--YZ5djTAD1cGYuMQK--