sure.  Here is it:

NetBSD 1.5.2 (GENERIC) #3: Sat Aug 18 23:37:05 CEST 2001
    he@hamster.urc.uninett.no:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon Model 4 (Thunderbird) (686-class), 900.11 MHz
total memory = 511 MB
avail memory = 468 MB
using 6573 buffers containing 26292 KB of memory
BIOS32 rev. 0 found at 0xfb400
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies product 0x0305 (rev. 0x03)
ppb0 at pci0 dev 1 function 0: VIA Technologies product 0x8305 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: ATI Technologies Mach64 GB (rev. 0x5c)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0
pcib0: VIA Technologies VT82C686A (Apollo KX133) PCI-ISA Bridge (rev. 0x40)
pciide0 at pci0 dev 7 function 1: VIA Technologies VT82C686A (Apollo KX133)
ATA100 controller
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
pciide0: disabling primary channel (no drives)
pciide0: secondary channel configured to compatibility mode
atapibus0 at pciide0 channel 1
cd0 at atapibus0 drive 0: <CREATIVE CD5233E, MT1199 A Firmware, C2.02> type
5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
uhci0 at pci0 dev 7 function 2: VIA Technologies VT83C572 USB Controller
(rev. 0x16)
uhci0: interrupting at irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 7 function 3: VIA Technologies VT83C572 USB Controller
(rev. 0x16)
uhci1: interrupting at irq 5
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pchb1 at pci0 dev 7 function 4
pchb1: VIA Technologies VT82C686A SMBus Controller (rev. 0x40)
ppb1 at pci0 dev 11 function 0: Digital Equipment DECchip 21152 PCI-PCI
Bridge (rev. 0x03)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled

**** NIC relevant stuff follows.

fxp0 at pci2 dev 4 function 0: Intel i82557 Ethernet, rev 5
fxp0: interrupting at irq 5
fxp0: Ethernet address 00:03:47:42:44:77, 10/100 Mb/s
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1 at pci2 dev 5 function 0: Intel i82557 Ethernet, rev 5
fxp1: interrupting at irq 10
fxp1: Ethernet address 00:03:47:42:44:78, 10/100 Mb/s
inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 0
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto

**** 

pciide1 at pci0 dev 19 function 0: Triones/Highpoint HPT370 IDE Controller
pciide1: bus-master DMA support present
pciide1: primary channel wired to native-PCI mode
pciide1: using irq 11 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <Maxtor 5T040H4>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 39083 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 80043264
sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5
wd1 at pciide1 channel 0 drive 1: <Maxtor 5T040H4>
wd1: drive supports 16-sector pio transfers, lba addressing
wd1: 38162 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 78156288
sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 (using DMA data
transfers)
wd1(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5 (using DMA data
transfers)
pciide1: secondary channel wired to native-PCI mode
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask eb65 netmask ef65 ttymask ffe7
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs


*********** REPLY SEPARATOR  ***********

On 10/09/2001 at 01:13 AM Manuel Bouyer wrote:

>On Mon, Oct 08, 2001 at 06:30:18PM -0400, Olu Howard wrote:
>> Yes.  It sees the card, both ports and gives them both resources but the
>> the interfaces won't configure and the link light (which should light up
>> regardless) goes out.
>
>Can you post the dmesg ?
>
>--
>Manuel Bouyer <bouyer@antioche.eu.org>
>--