Hello :
Can somebody please build a Xfree86 ver 4.1.0 and package it up ?
I spent 2 days to figure out why my X display was spitting this out...
Afterstep was displayed way too big ;-) Notice the 64KB when it's actually
16Megs!

And finally found out that my video card which is XPERT 2000  ==> Rage 128 Pro
is supported in ver 4.1.0 and not 3.3.6

This may help other poor newbies out there.
If not I can probably do it but it will take time ;-)
Thanks a ton.

XFree86 Version 3.3.6a / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: November 30 2000
 If the server is older than 6-12 months, or if your card is newer
 than the above date, look for a newer version before reporting
 problems.  (see http://www.XFree86.Org/FAQ)
Operating System: NetBSD/i386 1.5.2 [ELF] The NetBSD Foundation, Inc.
Configured drivers:
  SVGA: server for SVGA graphics adaptors (Patchlevel 1):
      NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2,
      RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, GeForce 256,
      GeForce DDR, Quadro, GeForce2 GTS, GeForce2 GTS (rev1),
      GeForce2 Ultra, Quadro 2 Pro, GeForce2 MX, GeForce2 MX DDR,
      Quadro 2 MXR, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b,
      ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b,
      ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1,
      wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, r128, ati,
      sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597,
      sis5598, sis6326, sis530, sis620, sis300, sis630, sis540, tvga8200lx,
      tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000,
      tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi,
      tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682,
      tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520,
      cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d, cyberblade,
      clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430,
      clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465,
      clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543,
      clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga, mga2064w,
      mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400, oti067,
      oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308,
      ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv,
      ark2000pv, ark2000mt, mx, realtek, s3_virge, AP6422, AT24, AT3D,
      s3_savage, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200,
      ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546,
      ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200,
      ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740, i740_pci,
      Voodoo Banshee, Voodoo3, smi, generic
Using wscons driver (version 3.32)
XF86Config: /etc/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc105"
(**) XKB: layout: "us"
(**) XKB: variant: ""
(**) XKB: options: ""
(**) Mouse: type: wsmouse, device: /dev/wsmouse0, buttons: 3
(**) SVGA: Graphics device ID: "ATI Rage Pro"
(**) SVGA: Monitor ID: "Dell Monitor"
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X
11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/li
b/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75d
pi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(--) SVGA: PCI: ATI Rage 128 PF rev 0, Memory @ 0xf0000000, MMIO @ 0xff8fc000,
I/O @ 0xc800
(--) SVGA: chipset:  generic
(--) SVGA: videoram: 64k
(**) SVGA: clocks:  25.18
(**) SVGA: Using 8 bpp, Depth 8, Color weight: 666
(--) SVGA: Using builtin driver modes
(--) SVGA: Builtin Mode: 320x200
(--) SVGA: Virtual resolution set to 320x204
(--) SVGA: SpeedUp code selection modified because virtualX != 1024