Subject: Re: Mount NTFS4
To: None <port-i386@netbsd.org>
From: Georges Heinesch <geohei-ml@geohei.lu>
List: port-i386
Date: 10/25/2001 15:10:28
Quoting Brian Seklecki (24-Oct-01 04:13:44):
>> > Is it possible to mount a NTFS4 (WinNT) filesystem within
>> > NetBSD/i386
>> > (NetBSD 1.5)?
> Try:
> $ man 8 mount_ntfs
> ...after you get it installed!
Thanks!
Next step ... after reading through the disklabel man pages and the
NetBSD mailinglist (i386), I didn't find any usable information how to
mount my logical NTFS partitions, located inside an extended
partition.
Here my disklabel and fdisk information of wd0:
----- cut here -----
dimension# disklabel wd0
# /dev/rwd0d:
type: ESDI
disk: Maxtor 91728D8
label: fictitious
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 16
sectors/cylinder: 1008
cylinders: 16383
total sectors: 33750864
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0 # microseconds
track-to-track seek: 0 # microseconds
drivedata: 0
8 partitions:
# size offset fstype [fsize bsize cpg]
d: 33750864 0 unused 0 0 # (Cyl. 0 - 33482)
e: 4192902 63 unused 0 0 # (Cyl. 0*- 4159*)
f: 25350570 8385930 unused 0 0 # (Cyl. 8319*- 33468*)
g: 4192965 4192965 MSDOS # (Cyl. 4159*- 8319*)
dimension# fdisk wd0
NetBSD disklabel disk geometry:
cylinders: 16383 heads: 16 sectors/track: 63 (1008 sectors/cylinder)
BIOS disk geometry:
cylinders: 1023 heads: 255 sectors/track: 63 (16065 sectors/cylinder)
Partition table:
0: sysid 23 (OS/2 BM: hidden IFS)
start 63, size 4192902 (2047 MB), flag 0x0
beg: cylinder 0, head 1, sector 1
end: cylinder 260, head 254, sector 63
1: sysid 15 (Ext. partition - LBA)
start 8385930, size 25350570 (12378 MB), flag 0x0
beg: cylinder 522, head 0, sector 1
end: cylinder 1023, head 254, sector 63
2: sysid 11 (Primary DOS with 32 bit FAT)
start 4192965, size 4192965 (2047 MB), flag 0x80
beg: cylinder 261, head 0, sector 1
end: cylinder 521, head 254, sector 63
3: <UNUSED>
----- cut here -----
disk 2 is FAT32 and can be mounted with msdos - no problem here!
disk 0 is a primary partition with NTFS - how can I mount this
partition?
disk 1 is a extended partition with a logical NTFS partition - same
question ... how can I mount this one?
TIA
--
Cu Georges Heinesch, Luxembourg
geohei@geohei.lu
http://www.geohei.lu
PGP RSA & DH/DSS public key on request and on public servers
... Only happy at FL 370, Mach 0.76