Subject: xf86MapVidMem change between 1.6D and E?
To: None <port-i386@netbsd.org>
From: None <itojun@iijlab.net>
List: port-i386
Date: 07/30/2002 14:07:21
i cannot run X on my machine after upgrading kernel from 1.6D to 1.6E.
are there any relevant changes?
i've lost my older rc.conf (overwritten by sushi by mistake),
that may be the reason.
itojun
XFree86 Version 3.3.6a / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: November 30 2000
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: NetBSD/i386 1.5X [ELF] The NetBSD Foundation, Inc.
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel 1):
NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2,
RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, GeForce 256,
GeForce DDR, Quadro, GeForce2 GTS, GeForce2 GTS (rev1),
GeForce2 Ultra, Quadro 2 Pro, GeForce2 MX, GeForce2 MX DDR,
Quadro 2 MXR, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b,
ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b,
ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1,
wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, r128, ati,
sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597,
sis5598, sis6326, sis530, sis620, sis300, sis630, sis540, tvga8200lx,
tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000,
tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi,
tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682,
tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520,
cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d, cyberblade,
clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430,
clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465,
clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543,
clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga, mga2064w,
mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400, oti067,
oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308,
ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv,
ark2000pv, ark2000mt, mx, realtek, s3_virge, AP6422, AT24, AT3D,
s3_savage, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200,
ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546,
ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200,
ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740, i740_pci,
Voodoo Banshee, Voodoo3, smi, generic
Using wscons driver (version 3.32)
XF86Config: /etc/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: disabled
(**) Mouse: type: wsmouse, device: /dev/wsmouse0, resolution: 100
(**) Mouse: buttons: 3, 3 button emulation (timeout: 50ms)
(**) SVGA: Graphics device ID: "S3 Savage MX"
(**) SVGA: Monitor ID: "Primary Monitor"
Warning: The directory "/usr/X11R6/lib/X11/fonts/ttf/" does not exist.
Entry deleted from font path.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local,/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi"
(--) SVGA: PCI: S3 Savage/IX-MV rev 17, Memory @ 0xf0000000
(**) SVGA: S3 chipset override, using chip_id = 0x8a20 instead of 0x8c12
(--) SVGA: SAVAGE: Savage3D rev 11, Linear FB @ 0xf0000000
(--) SVGA: Detected S3 Savage3D
(--) SVGA: using driver for chipset "s3_savage"
(--) SVGA: videoram: 4096k
(--) SVGA: Ramdac speed: 250 MHz (220 MHz for 32 bpp)
(--) SVGA: Detected current MCLK value of 83.045 MHz
Fatal server error:
xf86MapVidMem: Address 0xf1000000 outside allowable range
When reporting a problem related to a server crash, please send
the full server output, not just the last messages
X connection to :0.0 broken (explicit kill or server shutdown).