Subject: Kernel compile help for Neomagic 256AV
To: None <port-i386@netbsd.org>
From: Administrador de Red <webmaster@ferromex.com.mx>
List: port-i386
Date: 11/28/2002 17:35:19
Can somebody help me by telling me what should I include/exclude from
my kernel config file in order to support my Neomagic 256AV as a
Soundblaster?
Or maybe as WSS?
The original (GENERIC kernel install) crashed while configuring neo0.
This is a Compaq Presario 1925 Laptop.
I've customized GENERIC_LAPTOP to not configure Neomagic, and included
sb* to emulate Neomagic as Soundblaster.
This gave me a 'working' kernel but with no audio.
FWIW i'll include the output of dmesg thrown by this customized kernel, the
I/O info that Windows spit out for the Neomagic sound card, and the kernel
config file I came up with.
Windows info:
____________________
NeoMagic MagicWave 3DX Sound System
IRQ: 05
I/O: 0220h-022Fh
I/O: 0530h-0537h
I/O: 0388h-038Bh
I/O: 0330h-0331h
I/O: 0370h-0371h
DMA: 00
DMA: 01
Joystick
I/O: 0201h-0201h
NeoMagic MagicMedia 256AV Audio
IRQ: 10
MEM: F4800000h-F4BFFFFFh
MEM: F4200000h-F42FFFFFh
dmesg output:
____________________
.
NetBSD 1.6 (Presario1925_v1) #0: Thu Nov 28 00:52:27 GMT 2002
root@alex:/usr/src/sys/arch/i386/compile/Presario1925_v1
cpu0: Intel Celeron (Mendocino) (686-class), 331.86 MHz
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 2-way
cpu0: L2 cache 256 KB 32b/line 4-way
cpu0: features 183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 183f9ff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
cpu0: features 183f9ff<FXSR>
total memory = 65084 KB
avail memory = 55780 KB
using 839 buffers containing 3356 KB of memory
BIOS32 rev. 0 found at 0xfd8a0
PCI BIOS rev. 2.1 found at 0xfd9cf
pcibios: config mechanism [1][x], special cycles [x][x], last bus 3
PCI IRQ Routing Table rev. 1.0 found at 0xfdf50, size 144 bytes (7 entries)
PCI Interrupt Router at 000:07:0 (Intel 82371FB PCI-to-ISA Bridge (PIIX))
------------------------------------------
device vendor product pin PIRQ IRQ stage
------------------------------------------
000:07:2 0x8086 0x7112 D 0x03 10 0 already assigned
000:08:0 0x104c 0xac1c A 0x01 9 0 already assigned
000:08:1 0x104c 0xac1c A 0x01 9 0 already assigned
000:09:0 0x11c1 0x0441 A 0x00 3 0 already assigned
001:00:0 0x10c8 0x0005 A 0x01 9 0 already assigned
001:00:1 0x10c8 0x8005 B 0x03 10 0 already assigned
------------------------------------------
PCI fixup examining 8086:7190
PCI fixup examining 8086:7191
PCI fixup examining 10c8:05
PCI fixup examining 10c8:8005
PCI bridge 0: primary 0, secondary 1, subordinate 1
PCI fixup examining 8086:7110
PCI fixup examining 8086:7111
PCI fixup examining 8086:7112
PCI fixup examining 8086:7113
PCI fixup examining 104c:ac1c
PCI bridge 1: primary 0, secondary 2, subordinate 2
PCI fixup examining 104c:ac1c
PCI bridge 2: primary 0, secondary 3, subordinate 3
PCI fixup examining 11c1:441
PCI bus #3 is the last bus
[System BIOS Setting]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 0x8086 0x7190
10h mem 0xf8000000 0x04000000
[OK]
000:01:0 0x8086 0x7191
[OK]
000:07:0 0x8086 0x7110
[OK]
000:07:1 0x8086 0x7111
20h port 0x00001050 0x00000010
[OK]
000:07:2 0x8086 0x7112
20h port 0x00001060 0x00000020
[OK]
000:07:3 0x8086 0x7113
[OK]
000:08:0 0x104c 0xac1c
10h mem 0x00000000 0x00001000
[NG]
000:08:1 0x104c 0xac1c
10h mem 0x00000000 0x00001000
[NG]
000:09:0 0x11c1 0x0441
10h mem 0xf4000000 0x00000100
14h port 0x00001080 0x00000008
18h port 0x00001400 0x00000100
[OK]
001:00:0 0x10c8 0x0005
10h mem 0xf5000000 0x01000000
14h mem 0xf4400000 0x00400000
18h mem 0xf4100000 0x00100000
[OK]
001:00:1 0x10c8 0x8005
10h mem 0xf4800000 0x00400000
14h mem 0xf4200000 0x00100000
[OK]
--------------------------[ 2 devices bogus]
Physical memory end: 0x03fee000
PCI memory mapped I/O space start: 0x04000000
[PCIBIOS fixup stage]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 0x8086 0x7190
10h mem 0xf8000000 0x04000000
[OK]
000:01:0 0x8086 0x7191
[OK]
000:07:0 0x8086 0x7110
[OK]
000:07:1 0x8086 0x7111
20h port 0x00001050 0x00000010
[OK]
000:07:2 0x8086 0x7112
20h port 0x00001060 0x00000020
[OK]
000:07:3 0x8086 0x7113
[OK]
000:08:0 0x104c 0xac1c
10h mem 0x04000000 0x00001000
[OK]
000:08:1 0x104c 0xac1c
10h mem 0x04001000 0x00001000
[OK]
000:09:0 0x11c1 0x0441
10h mem 0xf4000000 0x00000100
14h port 0x00001080 0x00000008
18h port 0x00001400 0x00000100
[OK]
001:00:0 0x10c8 0x0005
10h mem 0xf5000000 0x01000000
14h mem 0xf4400000 0x00400000
18h mem 0xf4100000 0x00100000
[OK]
001:00:1 0x10c8 0x8005
10h mem 0xf4800000 0x00400000
14h mem 0xf4200000 0x00100000
[OK]
--------------------------[ 0 devices bogus]
mainbus0 (root)
pnpbios0 at mainbus0: nodes 17, max len 170
pnpbios0: dock id @H@0000, surprise hot docking
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443BX Host Bridge/Controller (rev. 0x03)
agp0 at pchb0: aperture at 0xf8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Intel 82443BX AGP Interface (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Neomagic MagicMedia 256AV VGA (rev. 0x20)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
Neomagic MagicMedia 256AV Audio (audio multimedia, revision 0x20) at pci1
dev 0 function 1 not configured
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
pciide0 at pci0 dev 7 function 1: Intel 82371AB IDE controller (PIIX4) (rev.
0x01)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHH2064AT>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 6194 MB, 13424 cyl, 15 head, 63 sec, 512 bytes/sect x 12685680 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA
data transfers)
pciide0: secondary channel wired to compatibility mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 0: <TOSHIBA DVD-ROM SD-C2202, 7900504835, 1021> type
5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA
data transfers)
uhci0 at pci0 dev 7 function 2: Intel 82371AB USB Host Controller (PIIX4)
(rev. 0x01)
uhci0: interrupting at irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge,
revision 0x02) at pci0 dev 7 function 3 not configured
cbb0 at pci0 dev 8 function 0: Texas Instruments PCI1225 PCI-CardBus Bridge
(rev. 0x01)
cbb1 at pci0 dev 8 function 1: Texas Instruments PCI1225 PCI-CardBus Bridge
(rev. 0x01)
Lucent Technologies LTMODEM (miscellaneous communications, revision 0x01) at
pci0 dev 9 function 0 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: read port 0x203
isapnp0: <NeoMagic MagicWave 3D Sound Sys, NMX2210, , > port
0x220/16,0x530/8,0x388/4,0x330/2,0x370/2 irq 5 drq 0,1 not configured
joy0 at isapnp0 port 0x201/1
joy0: NeoMagic MagicWave 3D Sound Sys
joy0: joystick not connected
cbb0: interrupting at irq 9
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0
pcmcia0 at cardslot0
cbb1: interrupting at irq 9
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0
pcmcia1 at cardslot1
apm0 at mainbus0: Power Management spec V1.2
biomask ef6d netmask ef6d ttymask ffef
ex0 at cardbus1 dev 0 function 0: 3Com 3c575B-TX Ethernet
ex0: MAC address 00:50:04:c8:98:4d
ukphy0 at ex0 phy 0: Generic IEEE 802.3u media interface
ukphy0: 78Q2120 10/100 media interface (OUI 0x00039c, model 0x0014), rev. 3
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
ex0: interrupting at 9
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
Kernel config file:
__________________________
# $NetBSD: GENERIC_LAPTOP,v 1.50.4.2 2002/08/01 04:22:49 lukem Exp $
# From: NetBSD: GENERIC,v 1.414 2001/07/30 19:59:05 ad Exp
#
# GENERIC_LAPTOP -- GENERIC with cardbus and some USB devices enabled
#
include "arch/i386/conf/std.i386"
#options INCLUDE_CONFIG_FILE # embed config file in kernel binary
#ident "GENERIC-$Revision: 1.50.4.2 $"
maxusers 32 # estimated number of users
# CPU support. At least one is REQUIRED.
#options I386_CPU
#options I486_CPU
options I586_CPU
options I686_CPU
# CPU-related options.
options MATH_EMULATE # floating point emulation
options VM86 # virtual 8086 emulation
options USER_LDT # user-settable LDT; used by WINE
# eliminate delay no-ops in I/O; recommended on all but very old machines
#options DUMMY_NOPS
options MTRR # memory-type range register syscall support
options PERFCTRS # performance-monitoring counters support
# delay between "rebooting ..." message and hardware reset, in milliseconds
#options CPURESET_DELAY=2000
# This option allows you to force a serial console at the specified
# I/O address. see console(4) for details.
#options CONSDEVNAME="\"com\"",CONADDR=0x2f8,CONSPEED=57600
# you don't want the option below ON iff you are using the
# serial console option of the new boot strap code.
#options CONS_OVERRIDE # Always use above! independent of boot info
# The following options override the memory sizes passed in from the boot
# block. Use them *only* if the boot block is unable to determine the
correct
# values. Note that the BIOS may *correctly* report less than 640k of base
# memory if the extended BIOS data area is located at the top of base memory
# (as is the case on most recent systems).
#options REALBASEMEM=639 # size of base memory (in KB)
#options REALEXTMEM=15360 # size of extended memory (in KB)
# Standard system options
options UCONSOLE # users can use TIOCCONS (for xconsole)
options INSECURE # disable kernel security levels
options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
options NTP # NTP phase/frequency locked loop
options KTRACE # system call tracing via ktrace(1)
options SYSVMSG # System V-like message queues
options SYSVSEM # System V-like semaphores
#options SEMMNI=10 # number of semaphore identifiers
#options SEMMNS=60 # number of semaphores in system
#options SEMUME=10 # max number of undo entries per process
#options SEMMNU=30 # number of undo structures in system
options SYSVSHM # System V-like memory sharing
#options SHMMAXPGS=1024 # 1024 pages is the default
options LKM # loadable kernel modules
#options USERCONF # userconf(4) support
#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
# Diagnostic/debugging support options
#options DIAGNOSTIC # expensive kernel consistency checks
#options DEBUG # expensive debugging checks/support
#options KMEMSTATS # kernel memory statistics (vmstat -m)
options DDB # in-kernel debugger
options DDB_HISTORY_SIZE=512 # enable history editing in DDB
#options KGDB # remote debugger
#options KGDB_DEVNAME="\"com\"",KGDB_DEVADDR=0x3f8,KGDB_DEVRATE=9600
#makeoptions DEBUG="-g" # compile full symbol table
# Compatibility options
options COMPAT_NOMID # compatibility with 386BSD, BSDI, NetBSD 0.8,
options COMPAT_09 # NetBSD 0.9,
options COMPAT_10 # NetBSD 1.0,
options COMPAT_11 # NetBSD 1.1,
options COMPAT_12 # NetBSD 1.2,
options COMPAT_13 # NetBSD 1.3,
options COMPAT_14 # NetBSD 1.4,
options COMPAT_15 # NetBSD 1.5,
options COMPAT_43 # and 4.3BSD
options COMPAT_386BSD_MBRPART # recognize old partition ID
#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
options COMPAT_SVR4 # binary compatibility with SVR4
options COMPAT_IBCS2 # binary compatibility with SCO and ISC
options COMPAT_LINUX # binary compatibility with Linux
options COMPAT_FREEBSD # binary compatibility with FreeBSD
#options COMPAT_MACH # binary compatibility with Mach binaries
#options EXEC_MACHO # exec MACH-O binaries
options COMPAT_PECOFF # kernel support to run Win32 apps
# File systems
file-system FFS # UFS
file-system EXT2FS # second extended file system (linux)
file-system LFS # log-structured file system
file-system MFS # memory file system
file-system NFS # Network File System client
file-system NTFS # Windows/NT file system (experimental)
file-system CD9660 # ISO 9660 + Rock Ridge file system
file-system MSDOSFS # MS-DOS file system
file-system FDESC # /dev/fd
file-system KERNFS # /kern
file-system NULLFS # loopback file system
file-system OVERLAY # overlay file system
file-system PORTAL # portal filesystem (still experimental)
file-system PROCFS # /proc
file-system UMAPFS # NULLFS + uid and gid remapping
file-system UNION # union file system
file-system CODA # Coda File System; also needs vcoda (below)
# File system options
options QUOTA # UFS quotas
#options FFS_EI # FFS Endian Independent support
options SOFTDEP # FFS soft updates support.
options NFSSERVER # Network File System server
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
# immutable) behave as system flags.
# Networking options
#options GATEWAY # packet forwarding
options INET # IP + ICMP + TCP + UDP
options INET6 # IPV6
#options IPSEC # IP security
#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
#options IPSEC_DEBUG # debug for IP security
#options MROUTING # IP multicast routing
options NS # XNS
#options NSIP # XNS tunneling over IP
options ISO,TPIP # OSI
#options EON # OSI tunneling over IP
options CCITT,LLC,HDLC # X.25
options NETATALK # AppleTalk networking protocols
options PPP_BSDCOMP # BSD-Compress compression support for PPP
options PPP_DEFLATE # Deflate compression support for PPP
options PPP_FILTER # Active filter support for PPP (requires bpf)
options PFIL_HOOKS # pfil(9) packet filter hooks
options IPFILTER_LOG # ipmon(8) log support
#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
# These options enable verbose messages for several subsystems.
# Warning, these may compile large string tables into the kernel!
options MIIVERBOSE # verbose PHY autoconfig messages
options PCIVERBOSE # verbose PCI device autoconfig messages
#options PCI_CONFIG_DUMP # verbosely dump PCI config space
options PCMCIAVERBOSE # verbose PCMCIA configuration messages
options SCSIVERBOSE # human readable SCSI error messages
options USBVERBOSE # verbose USB device autoconfig messages
#options PNPBIOSVERBOSE # verbose PnP BIOS messages
#options PNPBIOSDEBUG # more fulsome PnP BIOS debugging messages
options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
#
# wscons options
#
# builtin terminal emulations
#options WSEMUL_SUN # sun terminal emulation
options WSEMUL_VT100 # VT100 / VT220 emulation
# different kernel output - see dev/wscons/wsdisplayvar.h
options WS_KERNEL_FG=WSCOL_BLUE
#options WS_KERNEL_BG=WSCOL_BLACK
# compatibility to other console drivers
options WSDISPLAY_COMPAT_PCVT # emulate some ioctls
options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls
options WSDISPLAY_COMPAT_USL # VT handling
options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
# see dev/pckbc/wskbdmap_mfii.c for implemented layouts
#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
# allocate a number of virtual screens at autoconfiguration time
#options WSDISPLAY_DEFAULTSCREENS=4
# use a large software cursor that doesn't blink
options PCDISPLAY_SOFTCURSOR
# modify the screen type of the console; defaults to "80x25"
#options VGA_CONSOLE_SCREENTYPE="\"80x24\""
# Kernel root file system and dump configuration.
config netbsd root on ? type ?
#config netbsd root on sd0a type ffs
#config netbsd root on ? type nfs
#
# Device configuration
#
mainbus0 at root
apm0 at mainbus0 # Advanced power management
# Tuning for power management, see apm(4) for more details.
#options APM_NO_IDLE # Don't call BIOS CPU idle function
#options APM_V10_ONLY # Use only the APM 1.0 calls
#options APM_NO_POWEROFF # Don't power off on halt(8)
#options APM_POWER_PRINT # Print stats on the console
#options APM_DISABLE_INTERRUPTS=0 # Don't disable interrupts
# Basic Bus Support
# Plug-and-Play BIOS and attached devices
pnpbios* at mainbus?
# mainboard audio chips
#ess* at pnpbios? index ? # ESS AudioDrive
sb* at pnpbios? index ? # NeoMagic 256AV in sb mode
wss* at pnpbios? index ? # NeoMagic 256AV in wss mode
ym* at pnpbios? index ? # OPL3-SA3
# com port
# If enabled, consider changing "com0", "com1", and "com2" under "ISA Serial
# Interfaces" to "com*", otherwise com2 will attach at pnpbios? and there
# will be no com0. A side effect is pcmcia (and other) com? previously
# starting at com3 may attach as com1 or com2.
#com* at pnpbios? index ? # serial ports
# parallel port
# The above "com*" comments apply, cf. "lpt0" under "ISA parallel
# "printer interfaces".
#lpt* at pnpbios? index ? # parallel ports
#pckbc* at pnpbios? index ? # PC keyboard/mouse controller
#fdc* at pnpbios? index ? # floppy controller
# IDE controller on Toshiba Portege 3000 series (crippled PCI device)
#pciide* at pnpbios? index ?
# PCI bus support
pci* at mainbus? bus ?
pci* at pchb? bus ?
pci* at ppb? bus ?
# Configure PCI using BIOS information
options PCIBIOS # PCI BIOS support
options PCIBIOSVERBOSE # PCI BIOS verbose info
options PCIBIOS_ADDR_FIXUP # fixup PCI I/O addresses
options PCIBIOS_BUS_FIXUP # fixup PCI bus numbering
options PCIBIOS_INTR_FIXUP # fixup PCI interrupt routing
#options PCIBIOS_IRQS_HINT=0x0a00 # PCI interrupts hint. IRQ 9 or 11
options PCIBIOS_INTR_GUESS # see pcibios(4)
#options PCIINTR_DEBUG # super-verbose PCI interrupt fixup
# PCI bridges
pchb* at pci? dev ? function ? # PCI-Host bridges
pcib* at pci? dev ? function ? # PCI-ISA bridges
ppb* at pci? dev ? function ? # PCI-PCI bridges
# XXX 'puc's aren't really bridges, but there's no better place for them
here
puc* at pci? dev ? function ? # PCI "universal" comm. cards
agp* at pchb?
# ISA bus support
isa0 at mainbus?
isa0 at pcib?
# PCMCIA bus support
pcmcia* at pcic? controller ? socket ?
#pcmcia* at tcic? controller ? socket ?
# ISA PCMCIA controllers
#pcic0 at isa? port 0x3e0 iomem 0xd0000 iosiz 0x10000
#pcic1 at isa? port 0x3e2 iomem 0xe0000 iosiz 0x4000
#pcic2 at isa? port 0x3e4 iomem 0xe0000 iosiz 0x4000
#tcic0 at isa? port 0x240 iomem 0xd0000 iosiz 0x10000
# PCI PCMCIA controllers
#pcic0 at pci? dev? function ?
# ISA Plug-and-Play bus support
isapnp0 at isa?
# ISA Plug-and-Play PCMCIA controllers
pcic* at isapnp?
# CardBus bridge support
cbb* at pci? dev ? function ?
cardslot* at cbb?
# CardBus bus support
cardbus* at cardslot?
pcmcia* at cardslot?
# Coprocessor Support
# Math Coprocessor support
npx0 at isa? port 0xf0 irq 13 # x86 math coprocessor
# Console Devices
# ISA console
#pc0 at isa? port 0x60 irq 1 # pccons generic PC console driver
# Keyboard layout configuration for pccons
#options FRENCH_KBD
#options FINNISH_KBD
#options GERMAN_KBD
#options NORWEGIAN_KBD
# pccons-specific options:
#options XSERVER_DDB # PF12 gets you into DDB when X is running
#options XSERVER # X server support
# wscons
pckbc0 at isa? # pc keyboard controller
pckbd* at pckbc? # PC keyboard
pms* at pckbc? # PS/2 mouse for wsmouse
vga0 at isa?
vga* at pci? dev ? function ?
pcdisplay0 at isa? # CGA, MDA, EGA, HGA
wsdisplay* at vga? console ?
wsdisplay* at pcdisplay? console ?
wskbd* at pckbd? console ?
wsmouse* at pms? mux 0
pcppi0 at isa?
sysbeep0 at pcppi?
# Serial Devices
# PCI serial interfaces
com* at puc? port ? # 16x50s on "universal" comm boards
cy* at pci? dev ? function ? # Cyclades Cyclom-Y serial boards
cz* at pci? dev ? function ? # Cyclades-Z multi-port serial boards
# ISA Plug-and-Play serial interfaces
com* at isapnp? # Modems and serial boards
# PCMCIA serial interfaces
com* at pcmcia? function ? # Modems and serial cards
pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards
com* at pcmcom? slave ? # ...and the slave devices
# CardBus serial interfaces
com* at cardbus? dev ? function ? # Modems and serial cards
# ISA serial interfaces
#options COM_HAYESP # adds Hayes ESP serial board support
com0 at isa? port 0x3f8 irq 4 # Standard PC serial ports
com1 at isa? port 0x2f8 irq 3
com2 at isa? port 0x3e8 irq 5
#com3 at isa? port 0x2e8 irq 9
#ast0 at isa? port 0x1a0 irq 5 # AST 4-port serial cards
#com* at ast? slave ?
#boca0 at isa? port 0x100 irq 5 # BOCA 8-port serial cards
#boca0 at isa? port 0x100 irq 5 # BOCA 16-port serial cards (BB2016)
#boca1 at isa? port 0x140 irq 5 # this line is also needed for BB2016
#com* at boca? slave ?
#tcom0 at isa? port 0x100 irq 7 # TC-800 8-port serial cards
#com* at tcom? slave ?
#rtfps0 at isa? port 0x1230 irq 10 # RT 4-port serial cards
#com* at rtfps? slave ?
#cy0 at isa? iomem 0xd4000 irq 12 # Cyclades serial cards
#addcom0 at isa? port 0x108 irq 5 # Addonics FlexPort 8S
#com* at addcom? slave ?
#moxa0 at isa? port 0x100 irq 5 # MOXA C168H serial card (experimental)
#com* at moxa? slave ?
# Parallel Printer Interfaces
# ISA parallel printer interfaces
lpt0 at isa? port 0x378 irq 7 # standard PC parallel ports
lpt1 at isa? port 0x278
lpt2 at isa? port 0x3bc
# Hardware monitors
# LM7[89] and compatible hardware monitors
#lm0 at isa? port 0x290 # other common ports: 0x280, 0x310
# VIA VT82C686A hardware monitor
#viapm* at pci? dev ? function ?
#viaenv* at viapm?
# SCSI Controllers and Devices
# PCMCIA SCSI controllers
#aic* at pcmcia? function ? # Adaptec APA-1460 SCSI
#esp* at pcmcia? function ? # Qlogic ESP406/FAS408 SCSI
# CardBus SCSI cards
#ahc* at cardbus? dev ? function ? # Adaptec ADP-1480
#adv* at cardbus? dev ? function ? # AdvanSys 1200[A,B], 9xx[U,UA] SCSI
# SCSI bus support
#scsibus* at ahc?
#scsibus* at aic?
#scsibus* at esp?
# SCSI devices
#sd* at scsibus? target ? lun ? # SCSI disk drives
#st* at scsibus? target ? lun ? # SCSI tape drives
#cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
#ch* at scsibus? target ? lun ? # SCSI autochangers
#ses* at scsibus? target ? lun ? # SCSI Enclosure Services devices
#ss* at scsibus? target ? lun ? # SCSI scanners
#uk* at scsibus? target ? lun ? # SCSI unknown
# IDE and related devices
# PCI IDE controllers - see pciide(4) for supported hardware.
# The 0x0001 flag force the driver to use DMA, even if the driver doesn't
know
# how to set up DMA modes for this chip. This may work, or may cause
# a machine hang with some controllers.
pciide* at pci? dev ? function ? flags 0x0000
# ISA Plug-and-Play IDE controllers
wdc* at isapnp?
# PCMCIA IDE controllers
wdc* at pcmcia? function ?
# ISA ST506, ESDI, and IDE controllers
# Use flags 0x01 if you want to try to use 32bits data I/O (the driver will
# fall back to 16bits I/O if 32bits I/O are not functional).
# Some controllers pass the initial 32bit test, but will fail later.
wdc0 at isa? port 0x1f0 irq 14 flags 0x00
wdc1 at isa? port 0x170 irq 15 flags 0x00
# IDE drives
# Flags are used only with controllers that support DMA operations
# and mode settings (e.g. some pciide controllers)
# The lowest order four bits (rightmost digit) of the flags define the PIO
# mode to use, the next set of four bits the DMA mode and the third set the
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
# to use, and the last bit must be 1 for this setting to be used.
# For DMA and UDMA, 0xf (1111) means 'disable'.
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
# (0xc=1100, 0xa=1010, 0xf=1111)
# 0x0000 means "use whatever the drive claims to support".
wd* at wdc? channel ? drive ? flags 0x0000
wd* at pciide? channel ? drive ? flags 0x0000
# ATAPI bus support
atapibus* at wdc? channel ?
atapibus* at pciide? channel ?
# ATAPI devices
# flags have the same meaning as for IDE drives.
cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives
sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
st* at atapibus? drive ? flags 0x0000 # ATAPI tape drives
uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown
# Miscellaneous mass storage devices
# ISA floppy
fdc0 at isa? port 0x3f0 irq 6 drq 2 # standard PC floppy controllers
#fdc1 at isa? port 0x370 irq ? drq ?
fd* at fdc? drive ? # the drives themselves
# some machines need you to do this instead of fd*
#fd0 at fdc0 drive 0
# Network Interfaces
# PCI network interfaces
ex* at pci? dev ? function ? # 3Com 90x[BC]
fxp* at pci? dev ? function ? # Intel EtherExpress PRO 10+/100B
ne* at pci? dev ? function ? # NE2000-compatible Ethernet
rtk* at pci? dev ? function ? # Realtek 8129/8139
tlp* at pci? dev ? function ? # DECchip 21x4x and clones
# PCMCIA network interfaces
an* at pcmcia? function ? # Aironet PC4500/PC4800 (802.11)
awi* at pcmcia? function ? # BayStack 650/660 (802.11FH/DS)
cnw* at pcmcia? function ? # Xircom/Netwave AirSurfer
ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet
mbe* at pcmcia? function ? # MB8696x based Ethernet
ne* at pcmcia? function ? # NE2000-compatible Ethernet
ray* at pcmcia? function ? # Raytheon Raylink (802.11)
sm* at pcmcia? function ? # Megahertz Ethernet
wi* at pcmcia? function ? # Lucent WaveLan IEEE (802.11)
xi* at pcmcia? function ? # Xircom CreditCard Ethernet
mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards
com* at mhzc?
sm* at mhzc?
# CardBus network cards
ex* at cardbus? dev ? function ? # 3Com 3C575TX
fxp* at cardbus? dev ? function ? # Intel i8255x
rtk* at cardbus? dev ? function ? # Realtek 8129/8139
tlp* at cardbus? dev ? function ? # DECchip 21143
# MII/PHY support
dmphy* at mii? phy ? # Davicom DM9101 PHYs
exphy* at mii? phy ? # 3Com internal PHYs
icsphy* at mii? phy ? # Integrated Circuit Systems ICS189x
inphy* at mii? phy ? # Intel 82555 PHYs
iophy* at mii? phy ? # Intel 82553 PHYs
lxtphy* at mii? phy ? # Level One LXT-970 PHYs
nsphy* at mii? phy ? # NS83840 PHYs
nsphyter* at mii? phy ? # NS83843 PHYs
qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs
sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs
tlphy* at mii? phy ? # ThunderLAN PHYs
tqphy* at mii? phy ? # TDK Semiconductor PHYs
ukphy* at mii? phy ? # generic unknown PHYs
# USB Controller and Devices
# PCI USB controllers
ohci* at pci? dev ? function ? # Open Host Controller
uhci* at pci? dev ? function ? # Universal Host Controller (Intel)
# CardBus USB controllers
#ohci* at cardbus? dev ? function ? # Open Host Controller
# USB bus support
usb* at ohci?
usb* at uhci?
# USB Hubs
uhub* at usb?
uhub* at uhub? port ? configuration ? interface ?
# USB HID device
uhidev* at uhub? port ? configuration ? interface ?
# USB Mice
ums* at uhidev? reportid ?
wsmouse* at ums? mux 0
# USB Keyboards
ukbd* at uhidev? reportid ?
wskbd* at ukbd? console ? mux 1
# USB Generic HID devices
uhid* at uhidev? reportid ?
# USB Printer
ulpt* at uhub? port ? configuration ? interface ?
# USB Modem
umodem* at uhub? port ? configuration ?
ucom* at umodem?
# USB Mass Storage
umass* at uhub? port ? configuration ? interface ?
atapibus* at umass? channel ?
scsibus* at umass? channel ?
# USB audio
uaudio* at uhub? port ? configuration ?
# USB MIDI
umidi* at uhub? port ? configuration ?
# USB IrDA
# USB-IrDA bridge spec
uirda* at uhub? port ? configuration ? interface ?
irframe* at uirda?
# SigmaTel STIr4200 USB/IrDA Bridge
ustir* at uhub? port ?
irframe* at ustir?
# USB Ethernet adapters
aue* at uhub? port ? # ADMtek AN986 Pegasus based adapters
cue* at uhub? port ? # CATC USB-EL1201A based adapters
kue* at uhub? port ? # Kawasaki LSI KL5KUSB101B based adapters
# Prolofic PL2301/PL2302 host-to-host adapter
upl* at uhub? port ?
# Serial adapters
# FTDI FT8U100AX serial adapter
uftdi* at uhub? port ?
ucom* at uftdi? portno ?
uplcom* at uhub? port ? # I/O DATA USB-RSAQ2 serial adapter
ucom* at uplcom? portno ?
umct* at uhub? port ? # MCT USB-RS232 serial adapter
ucom* at umct? portno ?
# Diamond Multimedia Rio 500
urio* at uhub? port ?
# USB Handspring Visor
uvisor* at uhub? port ?
ucom* at uvisor?
# Y@P firmware loader
uyap* at uhub? port ?
# USB Generic driver
ugen* at uhub? port ?
# IrDA and Consumer Ir devices
# Toshiba Oboe
oboe* at pci? dev ? function ?
irframe* at oboe?
# Audio Devices
# PCI audio devices
auich* at pci? dev ? function ? # Intel ICH integrated AC'97 Audio
autri* at pci? dev ? function ? # Trident 4DWAVE based AC'97 Audio
auvia* at pci? dev ? function ? # VIA VT82C686A integrated AC'97 Audio
clcs* at pci? dev ? function ? # Cirrus Logic CS4280
clct* at pci? dev ? function ? # Cirrus Logic CS4281
cmpci* at pci? dev ? function ? # C-Media CMI8338/8738
eap* at pci? dev ? function ? # Ensoniq AudioPCI
emuxki* at pci? dev ? function ? # Creative SBLive! and PCI512
esa* at pci? dev ? function ? # ESS Allegro-1 / Maestro-3 PCI Audio
esm* at pci? dev ? function ? # ESS Maestro-1/2/2e PCI Audio Accelerator
eso* at pci? dev ? function ? # ESS Solo-1 PCI AudioDrive
fms* at pci? dev ? function ? # Forte Media FM801
#neo* at pci? dev ? function ? # NeoMagic 256 AC'97 Audio
sv* at pci? dev ? function ? # S3 SonicVibes
yds* at pci? dev ? function ? # Yamaha DS-1 PCI Audio
# ISA Plug-and-Play audio devices
ess* at isapnp? # ESS Tech ES1887, ES1888, ES888 audio
guspnp* at isapnp? # Gravis Ultra Sound PnP audio
sb* at isapnp? # SoundBlaster-compatible audio
wss* at isapnp? # Windows Sound System
ym* at isapnp? # Yamaha OPL3-SA3 audio
# ISA audio devices
# the "aria" probe might give false hits
#aria0 at isa? port 0x290 irq 10 # Aria
#ess0 at isa? port 0x220 irq 5 drq 1 drq2 5 # ESS 18XX
gus0 at isa? port 0x220 irq 7 drq 1 drq2 6 # Gravis Ultra Sound
pas0 at isa? port 0x220 irq 7 drq 1 # ProAudio Spectrum
pss0 at isa? port 0x220 irq 7 drq 6 # Personal Sound System
sp0 at pss0 port 0x530 irq 10 drq 0 # sound port driver
sb0 at isa? port 0x220 irq 5 drq 1 drq2 5 # SoundBlaster
wss0 at isa? port 0x530 irq 10 drq 0 drq2 1 # Windows Sound System
# PCMCIA audio devices
esl* at pcmcia? function ? # ESS 1688 AudioDrive
#cms0 at isa? port 0x220 # Creative Music System
# OPL[23] FM synthesizers
#opl0 at isa? port 0x388 # use only if not attached to sound card
opl* at cmpci? flags 1
opl* at esl?
opl* at eso?
opl* at ess?
opl* at fms?
opl* at sb?
opl* at sv?
opl* at wss?
opl* at yds?
opl* at ym?
# Audio support
#audio* at aria?
audio* at auich?
audio* at autri?
audio* at auvia?
audio* at clcs?
audio* at clct?
audio* at cmpci?
audio* at eap?
audio* at emuxki?
audio* at esa?
audio* at esl?
audio* at esm?
audio* at eso?
audio* at ess?
audio* at fms?
audio* at gus?
audio* at guspnp?
#audio* at neo?
audio* at pas?
audio* at sb?
audio* at sp?
audio* at sv?
audio* at uaudio?
audio* at wss?
audio* at yds?
audio* at ym?
# MPU 401 UARTs
#mpu* at isa? port 0x330 irq 9 # MPU401 or compatible card
mpu* at cmpci?
mpu* at eso?
mpu* at fms?
mpu* at sb?
mpu* at yds?
mpu* at ym?
# MIDI support
midi* at autri? # Trident 4DWAVE MIDI port
midi* at clcs? # Cirrus Logic CS4280 MIDI port
#midi* at clct? # Cirrus Logic CS4281 MIDI port
#midi* at cms? # Creative Music System
midi* at eap? # 137[01] MIDI port
midi* at mpu? # MPU 401
midi* at opl? # OPL FM synth
midi* at pcppi? # MIDI interface to the PC speaker
midi* at sb? # SB1 MIDI port
midi* at umidi? # USB MIDI
# The spkr driver provides a simple tone interface to the built in speaker.
#spkr0 at pcppi? # PC speaker
# Mice
# ISA busmice
lms0 at isa? port 0x23c irq 5 # Logitech bus mouse
lms1 at isa? port 0x238 irq 5
mms0 at isa? port 0x23c irq 5 # Microsoft InPort mouse
mms1 at isa? port 0x238 irq 5
wsmouse* at lms? mux 0
wsmouse* at mms? mux 0
# backwards compatible versions
#olms0 at isa? port 0x23c irq 5 # Logitech bus mouse
#olms1 at isa? port 0x238 irq 5
#omms0 at isa? port 0x23c irq 5 # Microsoft InPort mouse
#omms1 at isa? port 0x238 irq 5
# Joysticks
#joy* at pnpbios? index ? # Game port
# ISA Plug-and-Play joysticks
joy* at isapnp? # Game ports (usually on audio cards)
# ISA joysticks. Probe is a little strange; add only if you have one.
#joy0 at isa? port 0x201
# Miscellaneous Devices
# Planetconnect Satellite receiver driver.
#satlink0 at isa? port 0x300 drq 1
# Pull in optional local configuration
include "arch/i386/conf/GENERIC.local"
# Pseudo-Devices
# disk/mass storage pseudo-devices
pseudo-device ccd 4 # concatenated/striped disk devices
#pseudo-device raid 8 # RAIDframe disk driver
#options RAID_AUTOCONFIG # auto-configuration of RAID components
# Options to enable various other RAIDframe RAID types.
# options RF_INCLUDE_EVENODD=1
# options RF_INCLUDE_RAID5_RS=1
# options RF_INCLUDE_PARITYLOGGING=1
# options RF_INCLUDE_CHAINDECLUSTER=1
# options RF_INCLUDE_INTERDECLUSTER=1
# options RF_INCLUDE_PARITY_DECLUSTERING=1
# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
pseudo-device md 1 # memory disk device (ramdisk)
pseudo-device vnd 4 # disk-like interface to files
# network pseudo-devices
pseudo-device bpfilter 8 # Berkeley packet filter
pseudo-device ipfilter # IP filter (firewall) and NAT
pseudo-device loop # network loopback
pseudo-device ppp 2 # Point-to-Point Protocol
pseudo-device pppoe # PPP over Ethernet (RFC 2516)
pseudo-device sl 2 # Serial Line IP
pseudo-device strip 2 # Starmode Radio IP (Metricom)
pseudo-device irframetty # IrDA frame line discipline
pseudo-device tun 2 # network tunneling over tty
pseudo-device gre 2 # generic L3 over IP tunnel
pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device faith 1 # IPv[46] tcp relay translation i/f
#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation
pseudo-device vlan # IEEE 802.1q encapsulation
pseudo-device bridge # simple inter-network bridging
# miscellaneous pseudo-devices
pseudo-device pty # pseudo-terminals
pseudo-device tb 1 # tablet line discipline
pseudo-device sequencer 1 # MIDI sequencer
# rnd works; RND_COM does not on port i386 yet.
pseudo-device rnd # /dev/random and in-kernel generator
#options RND_COM # use "com" randomness as well (BROKEN)
pseudo-device clockctl # user control of clock subsystem
# a pseudo device needed for Coda # also needs CODA (above)
pseudo-device vcoda 4 # coda minicache <-> venus comm.
# wscons pseudo-devices
pseudo-device wsmux # mouse & keyboard multiplexor
pseudo-device wsfont
Kind regards and many thanks in advance.
-Alex
Alejandro Rosales
Administrador de Red
NOC Ciruelos
Ferrocarril Mexicano S.A. de C.V.
Tel. 52463700 extension 3257
http://www.ferromex.com.mx
Alejandro Rosales
Administrador de Red
NOC Ciruelos
Ferrocarril Mexicano S.A. de C.V.
Tel. 52463700 extension 3257
http://www.ferromex.com.mx