Subject: Re: Low AAC performance but only when tested through the file system
To: Olaf Seibert <rhialto@polderland.nl>
From: Bill Studenmund <wrstuden@netbsd.org>
List: port-i386
Date: 12/01/2003 17:57:30
--dFWYt1i2NyOo1oI9
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
On Mon, Dec 01, 2003 at 02:50:52AM +0100, Olaf Seibert wrote:
> On Sun 30 Nov 2003 at 15:07:33 -0800, Bill Studenmund wrote:
> > What's your stripe depth? For optimal performance, you want it to be 16=
k. =20
> > The file system will do 64k i/o's. With 4 data drives & a 16k stripe
> > depth, a 64k i/o (on a 64k boundary) will hit all 4 drives at once.
>=20
> It's the default 64k. In the previous hardware I tried 16k also but it
> made no difference, so I never tried it on this one.
With a stripe depth of 64k (stripe width of 256k) and 64k i/os you will =
=20
get poor performance. If you are performing random i/o, each of those 64k=
=20
writes means READING 3 * 64k =3D 192k then writing 128k.
Assuming the stripe depth really is 64k, each write by the OS will turn=20
into a read/modify/write operation in the RAID card. You'll be getting=20
worse performance than if you just used one drive.
I think you want to try playing with RAID tuning.
Take care,
Bill
--dFWYt1i2NyOo1oI9
Content-Type: application/pgp-signature
Content-Disposition: inline
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (NetBSD)
iD8DBQE/y/GKWz+3JHUci9cRApxbAJ4os5UgZezGf7NUoorZwoixV1GhngCfWl3z
ZGGBENxIs93xyCHrwC6JBY4=
=wfJY
-----END PGP SIGNATURE-----
--dFWYt1i2NyOo1oI9--