Subject: Thinkpad port replicator a problem under NetBSD 3.0
To: None <port-i386@netbsd.org>
From: Scott Presnell <srp@tworoads.net>
List: port-i386
Date: 01/09/2006 13:33:54
Hi Thnkpad NetBSD folks,
I had been using a Thinkpad T42 with NetBSD 2.0 both off and on a
port replicator for some time without any specific issues (external PS/2
mouse and keyboard, ethernet, USB ports). The port replicator doesn't
show up as anything - it appears transparent to all these devices.
I installed NetBSD 3.0 today:
If the Thinkpad is started on the port replicator, it boots and goes into
userland OK. If I use wscons to get to a virtual terminal, I can login etc,
and use it pretty much as I like but as soon as I switch to another virtual
console it hangs. Sometimes I can login to the kdm/xdm screen and use X,
but mostly it hangs.
(hang => no ping, black screen with white cursor in upper left).
If the Thinkpad is started off the port replcator All is Good. I can
switch virtual terminals at any time, login to X, etc.
(Remote telnet logins are fine in both cases.)
The one signficant difference I can find regards the mouse recognition;
booting off the port replicator I get (this is also different from nb2.0):
pms0 at pckbc0 (aux slot)
pms0: Synaptics touchpad version 5.9
pms0: Palm detect, Multi-finger
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
while booting on the port replicator I get:
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
I tried a custom kernel with:
options PMS_SYNAPTICS_TOUCHPAD
commented out but with no change in function.
If anyone has experince with this problem I'd appreciate any help.
Thanks.
- Scott
dmesg from boot while on the port replicator
NetBSD 3.0 (GENERIC_LAPTOP) #0: Mon Dec 19 01:08:52 UTC 2005
builds@works.netbsd.org:/home/builds/ab/netbsd-3-0-RELEASE/i386/200512182024Z-obj/home/builds/ab/netbsd-3-0-RELEASE/src/sys/arch/i386/compile/GENERIC_LAPTOP
total memory = 510 MB
avail memory = 493 MB
BIOS32 rev. 0 found at 0xfd750
PCI BIOS rev. 2.1 found at 0xfd8d6
pcibios: config mechanism [1][x], special cycles [x][x], last bus 8
PCI IRQ Routing Table rev. 1.0 found at 0xfdea0, size 272 bytes (15 entries)
PCI Interrupt Router at 000:31:0 (Intel 82371FB (PIIX) PCI-ISA Bridge compatible)
------------------------------------------
device vendor product pin PIRQ IRQ stage
------------------------------------------
000:29:0 0x8086 0x24c2 A 0x00 11 0 already assigned
000:29:1 0x8086 0x24c4 B 0x03 11 0 already assigned
000:29:2 0x8086 0x24c7 C 0x02 11 0 already assigned
000:29:7 0x8086 0x24cd D 0x07 11 0 already assigned
000:31:1 0x8086 0x24ca A 0x02 11 0 fixed up
000:31:3 0x8086 0x24c3 B 0x01 5 0 already assigned
000:31:5 0x8086 0x24c5 B 0x01 5 0 already assigned
000:31:6 0x8086 0x24c6 B 0x01 5 0 already assigned
001:00:0 0x1002 0x4c57 A 0x00 11 0 already assigned
002:00:0 0x104c 0xac46 A 0x00 11 0 already assigned
002:00:1 0x104c 0xac46 B 0x01 5 0 already assigned
002:01:0 0x8086 0x101e A 0x00 11 0 already assigned
002:02:0 0x168c 0x1014 A 0x02 11 0 already assigned
------------------------------------------
PCI fixup examining 8086:3340
PCI fixup examining 8086:3341
PCI fixup examining 1002:4c57
PCI bridge 0: primary 0, secondary 1, subordinate 1
PCI fixup examining 8086:24c2
PCI fixup examining 8086:24c4
PCI fixup examining 8086:24c7
PCI fixup examining 8086:24cd
PCI fixup examining 8086:2448
PCI fixup examining 104c:ac46
PCI bridge 2: primary 2, secondary 3, subordinate 3
PCI fixup examining 104c:ac46
PCI bridge 3: primary 2, secondary 4, subordinate 4
PCI fixup examining 8086:101e
PCI fixup examining 168c:1014
PCI bridge 1: primary 0, secondary 2, subordinate 4
PCI fixup examining 8086:24cc
PCI fixup examining 8086:24ca
PCI fixup examining 8086:24c3
PCI fixup examining 8086:24c5
PCI fixup examining 8086:24c6
PCI bus #4 is the last bus
[System BIOS Setting]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 0x8086 0x3340
10h mem 0xd0000000 0x10000000
[OK]
000:01:0 0x8086 0x3341
[OK]
000:29:0 0x8086 0x24c2
20h port 0x00001800 0x00000020
[OK]
000:29:1 0x8086 0x24c4
20h port 0x00001820 0x00000020
[OK]
000:29:2 0x8086 0x24c7
20h port 0x00001840 0x00000020
[OK]
000:29:7 0x8086 0x24cd
10h mem 0xc0000000 0x00000400
[OK]
000:30:0 0x8086 0x2448
[OK]
000:31:0 0x8086 0x24cc
[OK]
000:31:1 0x8086 0x24ca
10h port 0x00000000 0x00000008
14h port 0x00000000 0x00000004
18h port 0x00000000 0x00000008
1ch port 0x00000000 0x00000004
20h port 0x00001860 0x00000010
24h mem 0x00000000 0x00000400
[NG]
000:31:3 0x8086 0x24c3
20h port 0x00001880 0x00000020
[OK]
000:31:5 0x8086 0x24c5
10h port 0x00001c00 0x00000100
14h port 0x000018c0 0x00000040
18h mem 0xc0000c00 0x00000200
1ch mem 0xc0000800 0x00000100
[OK]
000:31:6 0x8086 0x24c6
10h port 0x00002400 0x00000100
14h port 0x00002000 0x00000080
[OK]
001:00:0 0x1002 0x4c57
10h mem 0xe0000000 0x08000000
14h port 0x00003000 0x00000100
18h mem 0xc0100000 0x00010000
[OK]
002:00:0 0x104c 0xac46
10h mem 0xb0000000 0x00001000
[OK]
002:00:1 0x104c 0xac46
10h mem 0xb1000000 0x00001000
[OK]
002:01:0 0x8086 0x101e
10h mem 0xc0220000 0x00020000
14h mem 0xc0200000 0x00010000
18h port 0x00008000 0x00000040
[OK]
002:02:0 0x168c 0x1014
10h mem 0xc0210000 0x00010000
[OK]
--------------------------[ 1 devices bogus]
Physical memory end: 0x1ff5c000
PCI memory mapped I/O space start: 0x20000000
[PCIBIOS fixup stage]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 0x8086 0x3340
10h mem 0xd0000000 0x10000000
[OK]
000:01:0 0x8086 0x3341
[OK]
000:29:0 0x8086 0x24c2
20h port 0x00001800 0x00000020
[OK]
000:29:1 0x8086 0x24c4
20h port 0x00001820 0x00000020
[OK]
000:29:2 0x8086 0x24c7
20h port 0x00001840 0x00000020
[OK]
000:29:7 0x8086 0x24cd
10h mem 0xc0000000 0x00000400
[OK]
000:30:0 0x8086 0x2448
[OK]
000:31:0 0x8086 0x24cc
[OK]
000:31:1 0x8086 0x24ca
10h port 0x00005800 0x00000008
14h port 0x00005808 0x00000004
18h port 0x00005810 0x00000008
1ch port 0x0000580c 0x00000004
20h port 0x00001860 0x00000010
24h mem 0x20000000 0x00000400
[OK]
000:31:3 0x8086 0x24c3
20h port 0x00001880 0x00000020
[OK]
000:31:5 0x8086 0x24c5
10h port 0x00001c00 0x00000100
14h port 0x000018c0 0x00000040
18h mem 0xc0000c00 0x00000200
1ch mem 0xc0000800 0x00000100
[OK]
000:31:6 0x8086 0x24c6
10h port 0x00002400 0x00000100
14h port 0x00002000 0x00000080
[OK]
001:00:0 0x1002 0x4c57
10h mem 0xe0000000 0x08000000
14h port 0x00003000 0x00000100
18h mem 0xc0100000 0x00010000
[OK]
002:00:0 0x104c 0xac46
10h mem 0xb0000000 0x00001000
[OK]
002:00:1 0x104c 0xac46
10h mem 0xb1000000 0x00001000
[OK]
002:01:0 0x8086 0x101e
10h mem 0xc0220000 0x00020000
14h mem 0xc0200000 0x00010000
18h port 0x00008000 0x00000040
[OK]
002:02:0 0x168c 0x1014
10h mem 0xc0210000 0x00010000
[OK]
--------------------------[ 0 devices bogus]
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium M (Dothan) (686-class), 1698.64 MHz, id 0x6d6
cpu0: features afe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR>
cpu0: features afe9f9bf<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu0: features afe9f9bf<FXSR,SSE,SSE2,SS,TM,SBF>
cpu0: features2 180<EST,TM2>
cpu0: "Intel(R) Pentium(R) M processor 1.70GHz"
cpu0: using thermal monitor 2
cpu0: Enhanced SpeedStep running at 1700 MHz (1340 mV)
cpu0: Enhanced SpeedStep frequencies available (MHz): 1700 1400 1200 1000 800 600
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82855PM MCH Host Controller (rev. 0x03)
agp0 at pchb0: aperture at 0xd0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: Intel 82855PM Host-AGP Bridge (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: ATI Technologies Radeon Mobility M7 LW (AGP) (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
uhci0 at pci0 dev 29 function 0: Intel 82801DB USB UHCI Controller (rev. 0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801DB USB UHCI Controller (rev. 0x01)
uhci1: interrupting at irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801DB USB UHCI Controller (rev. 0x01)
uhci2: interrupting at irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 82801DB USB EHCI Controller (rev. 0x01)
ehci0: interrupting at irq 11
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: single transaction translator
uhub3: 6 ports with 6 removable, self powered
ppb1 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0x81)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
cbb0 at pci2 dev 0 function 0: Texas Instruments PCI4520 PCI-CardBus Bridge w/ IEEE 1394 Host Controller (rev. 0x01)
cbb1 at pci2 dev 0 function 1: Texas Instruments PCI4520 PCI-CardBus Bridge w/ IEEE 1394 Host Controller (rev. 0x01)
wm0 at pci2 dev 1 function 0: Intel i82540EP 1000BASE-T Ethernet, rev. 3
wm0: interrupting at irq 11
wm0: 32-bit 33MHz PCI bus
wm0: 64 word (6 address bits) MicroWire EEPROM
wm0: Ethernet address 00:11:25:12:ed:40
makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 4
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ath0 at pci2 dev 2 function 0
ath0: interrupting at irq 11
ath0: mac 5.9 phy 4.3 5ghz radio 3.6
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0
pcmcia0 at cardslot0
cbb1: interrupting at irq 5
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0
pcmcia1 at cardslot1
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801DB ISA Bridge (rev. 0x01)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801DBM IDE Controller (ICH4-M) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
Intel 82801DB SMBus Controller (SMBus serial bus, revision 0x01) at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5: i82801DB/DBM (ICH4/ICH4M) AC-97 Audio
auich0: interrupting at irq 5
auich0: ac97: Analog Devices AD1981B codec; headphone, 20 bit DAC, no 3D stereo
auich0: ac97: ext id 601<AC97_22,AMAP,VRA>
Intel 82801DB AC97 Modem Controller (modem communications, revision 0x01) at pci0 dev 31 function 6 not configured
isa0 at pcib0
lpt2 at isa0 port 0x3bc-0x3bf irq : polled
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
apm0 at mainbus0: Power Management spec V1.2
auich0: measured ac97 link rate at 48003 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
Kernelized RAIDframe activated
ugen0 at uhub2 port 2
ugen0: STMicroelectronics Biometric Coprocessor, rev 1.00/0.01, addr 2
wd0 at atabus0 drive 0: <TOSHIBA MK4026GAX>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <UJDA755yDVD/CDRW, , 1.72> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)