Subject: Geometry sensing problem w/new 30GB 5.5G iPod
To: None <port-i386@netbsd.org>
From: David W. Talmage <talmage@onespeeddave.com>
List: port-i386
Date: 09/21/2006 19:25:09
NetBSD 3.0.1 doesn't correctly sense the geometry of my brand new iPod and I
can't figure out why. Please help me. My google-fu isn't strong enough to
find the answer.
The iPod shows up as 7GB or so instead of 30GB. mount, disklabel, and fdisk
all hang when I ask them to do anything with the drive.
I wonder if this problem is related to the one I had recently with a brand new
4GB SD card. NetBSD wouldn't mount it until I did a low-level format using
my Canon SD450 point'n'shoot. I'm afraid to try a low-level format on my new
iPod. :-(
The system is an AOpen XC Cube. It has an AOpen UX4SG-1394 motherboard.
I compiled the kernel myself. Mine differs from GENERIC only in that it has
options SHMMAXPGS=32768
Here is the dmesg output. The lines about the iPod are at the end.
NetBSD 3.0.1 (MACDONELL) #0: Sat Aug 19 18:21:00 EDT 2006
root@macdonell.onespeeddave.com:/usr/src/sys/arch/i386/compile/MACDONELL
total memory = 1015 MB
avail memory = 985 MB
BIOS32 rev. 0 found at 0xfb9f0
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium 4 (686-class), 2394.05 MHz, id 0xf25
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 4400<CID,xTPR>
cpu0: "Intel(R) Pentium(R) 4 CPU 2.40GHz"
cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64B/line 4-way
cpu0: L2 cache 512 KB 64B/line 8-way
cpu0: ITLB 4K/4M: 64 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: running without thermal monitor!
cpu0: 16 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82865 Host (rev. 0x02)
agp0 at pchb0: detected 8060k stolen memory
agp0: aperture at 0xf0000000, size 0x8000000
vga1 at pci0 dev 2 function 0: Intel 82865G Integrated Graphics Device (rev.
0x02)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
uhci0 at pci0 dev 29 function 0: Intel 82801EB/ER USB UHCI Controller (rev.
0x02)
uhci0: interrupting at irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801EB/ER USB UHCI Controller (rev.
0x02)
uhci1: interrupting at irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801EB/ER USB UHCI Controller (rev.
0x02)
uhci2: interrupting at irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3: Intel 82801EB/ER USB UHCI Controller (rev.
0x02)
uhci3: interrupting at irq 5
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 82801EB/ER USB EHCI Controller (rev.
0x02)
ehci0: interrupting at irq 11
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: single transaction translator
uhub4: 8 ports with 8 removable, self powered
ppb0 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0xc2)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
bge0 at pci1 dev 7 function 0: Broadcom BCM5705 Gigabit Ethernet
bge0: interrupting at irq 10
bge0: ASIC BCM5705 A3 (0x3003), Ethernet address 00:01:80:4f:68:61
brgphy0 at bge0 phy 1: BCM5705 1000BASE-T media interface, rev. 2
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
Lucent Technologies FW322/323 IEEE 1394 Host Controller (Firewire serial bus,
interface 0x10, revision 0x61) at pci1 dev 13 function 0 not configured
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801EB LPC Interface Bridge (rev. 0x02)
piixide0 at pci0 dev 31 function 2
piixide0: Intel 82801EB Serial ATA Controller (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
Intel 82801EB/ER SMBus Controller (SMBus serial bus, revision 0x02) at pci0
dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5: i82801EB (ICH5) AC-97 Audio
auich0: interrupting at irq 3
auich0: ac97: Avance Logic ALC650 codec; 20 bit DAC, 18 bit ADC, Realtek 3D
auich0: ac97: ext id 5c7<AC97_22,LDAC,SDAC,CDAC,SPDIF,DRA,VRA>
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
auich0: measured ac97 link rate at 48003 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
Kernelized RAIDframe activated
umass0 at uhub4 port 4 configuration 1 interface 0
umass0: Genesys Logic USB Storage, rev 2.00/91.44, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 4 luns per target
sd0 at scsibus0 target 0 lun 0: <Generic, STORAGE DEVICE, 9144> disk removable
sd0: drive offline
sd1 at scsibus0 target 0 lun 1: <Generic, STORAGE DEVICE, 9144> disk removable
sd1: drive offline
sd2 at scsibus0 target 0 lun 2: <Generic, STORAGE DEVICE, 9144> disk removable
sd2: drive offline
sd3 at scsibus0 target 0 lun 3: <Generic, STORAGE DEVICE, 9144> disk removable
sd3: drive offline
ulpt0 at uhub0 port 2 configuration 1 interface 0
ulpt0: Samsung Samsung ML-2010, rev 1.10/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
wd0 at atabus0 drive 0: <ST380013AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <AOPEN CD-RW CRW5232 1.03 20031013, , 1.03>
cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
sd0(umass0:0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
sd1(umass0:0:0:1): Check Condition on CDB: 0x00 20 00 00 00 00
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
sd2(umass0:0:0:2): Check Condition on CDB: 0x00 40 00 00 00 00
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
sd3(umass0:0:0:3): Check Condition on CDB: 0x00 60 00 00 00 00
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
sd0(umass0:0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
sd1(umass0:0:0:1): Check Condition on CDB: 0x00 20 00 00 00 00
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
sd2(umass0:0:0:2): Check Condition on CDB: 0x00 40 00 00 00 00
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
sd3(umass0:0:0:3): Check Condition on CDB: 0x00 60 00 00 00 00
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
sd0(umass0:0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
sd1(umass0:0:0:1): Check Condition on CDB: 0x00 20 00 00 00 00
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
sd2(umass0:0:0:2): Check Condition on CDB: 0x00 40 00 00 00 00
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
sd3(umass0:0:0:3): Check Condition on CDB: 0x00 60 00 00 00 00
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
sd0(umass0:0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
sd1(umass0:0:0:1): Check Condition on CDB: 0x00 20 00 00 00 00
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
sd2(umass0:0:0:2): Check Condition on CDB: 0x00 40 00 00 00 00
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
sd3(umass0:0:0:3): Check Condition on CDB: 0x00 60 00 00 00 00
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
umass1 at uhub4 port 6 configuration 1 interface 0
umass1: Apple iPod, rev 2.00/0.02, addr 3
umass1: using SCSI over Bulk-Only
scsibus1 at umass1: 2 targets, 1 lun per target
sd4 at scsibus1 target 0 lun 0: <Apple, iPod, 1.62> disk removable
sd4: fabricating a geometry
sd4: 7153 MB, 7153 cyl, 64 head, 32 sec, 512 bytes/sect x 14651280 sectors