Subject: Gigabyte 965P, JMicron IDE/SATA Controller
To: None <port-i386@NetBSD.org>
From: Frank Naumann <fnaumann@boerde.de>
List: port-i386
Date: 03/01/2007 16:15:20
Hello!

I have a Gigabyte GA-965P-DS4 which have a JMicron JMB363 IDE/SATA 
controller on board that is not yet supported by NetBSD 4. Any chance that 
the IDE part is supported with bus-master DMA? Without bus-master DMA any 
access to the DVD drive slow down the system significantly (PIO mode).

ahcisata0 at pci4 dev 0 function 0: unknown vendor 0x197b product 0x2363
ahcisata0: AHCI revision 1.0, 2 ports, 32 command slots, features 0xc722e000
ahcisata0: interrupting at ioapic0 pin 17 (irq 10)
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
pciide0 at pci4 dev 0 function 1
pciide0: unknown vendor 0x197b product 0x2363 (rev. 0x02)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel wired to native-PCI mode
pciide0: using ioapic0 pin 18 (irq 15) for native-PCI interrupt
atabus2 at pciide0 channel 0
pciide0: secondary channel wired to native-PCI mode
atabus3 at pciide0 channel 1


Regards,
Frank