I swear I had this working before.  I may have messed something up in 
the BIOS, but the only thing I know I did since this was working was 
boot an Fedora 7 Live CD on the computer.  Now Ethernet is broken...

I've got a VIA EPIA EN15000G with a VT612x gigE ethernet chip.
I'm running CURRENT from 2007-06-<mumble>.  The ethernet used to work, 
but now on boot I get output like this:
vge0 at pci0 dev 14 function 0: VIA VT612X Gigabit Ethernet (rev. 0x11)
vge0: interrupting at ioapic0 pin 18 (irq 10)
vge0: Ethernet address: 73:fa:73:fa:73:fa
vge0: MII read timed out
vge0: failed to start MII autopoll

scanpci output has:
pci bus 0x0000 cardnum 0x0e function 0x00: vendor 0x1106 device 0x3119
  VIA Technologies, Inc. VT6120/VT6121/VT6122 Gigabit Ethernet Adapter

ifconfig output gives:
vge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
...
enabled=0

In the BIOS I've got APIC Enabled, and Plug & Play disabled (though I 
had the problem with it enabled as well).  I'm on the latest bios rev. 1.07.

Any ideas?

Thanks,

Robert

-- 
Robert Thille                7575 Meadowlark Dr.; Sebastopol, CA 95472
Home: 707.824.9753    Office/VOIP: 707.780.1560     Cell: 707.217.7544
rthille@mirapoint.com    YIM:rthille     http://www.rangat.org/rthille
Cyclist, Mountain Biker, Freediver, Kayaker, Rock Climber, Hiker, Geek
May your spirit dive deep the blue, where the fish are many and large!