TrackPad support?

[Paul Goyette <paul%whooppee.com@localhost>]

I'm the proud (or maybe unfortunate) owner of a Acer Travelmate 2413WLCi 
laptop.  The only "mouse" device on this machine is TrackPad (or is it a 
TouchPad?) - no little knobby joystick or anything.

I know I can connect up an external mouse via USB, but sometimes it 
would be nice to be able to use the trackpad.  But it seems that there's 
no suppor for this in -current.

Does anyone have any idea what it would take to make it work?

I've attached the dmesg.boot file in case it helps identify the device.

----------------------------------------------------------------------
|   Paul Goyette   | PGP DSS Key fingerprint: |  E-mail addresses:   |
| Customer Service | FA29 0E3B 35AF E8AE 6651 |  paul%whooppee.com@localhost   |
| Network Engineer | 0786 F758 55DE 53BA 7731 | pgoyette%juniper.net@localhost |
----------------------------------------------------------------------

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.60 (LAPPY (Acer Travelmate 2413WLCi) 2008-04-18 16:51:17) #1: Sat 
Apr 19 16:44:42 PDT 2008
        
root%speedy.whooppee.com@localhost:/build/obj/objdir/i386/sys/arch/i386/compile/LAPPY
total memory = 1014 MB
avail memory = 991 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Acer TravelMate 2410 (0100           )
PCI BIOS rev. 2.1 found at 0xfd70e
pcibios: config mechanism [1][x], special cycles [x][x], last bus 6
PCI IRQ Routing Table rev. 1.0 found at 0xfdf10, size 0 bytes (-2 entries)
pcibios_pir_init: bad IRQ table size
PCI BIOS has 11 Interrupt Routing table entries
mainbus0 (root)
ACPI: RSDP @ 0x0xf7a10/0x0014 (v000 PTLTD )
ACPI: RSDT @ 0x0x3f6e5e41/0x003C (v001 PTLTD    RSDT   0x06040000  LTP 
0x00000000)
ACPI: FACP @ 0x0x3f6e9e78/0x0084 (v002 INTEL  ALVISO   0x06040000 LOHR 
0x0000005F)
ACPI: DSDT @ 0x0x3f6e625a/0x3C1E (v001 INTEL  ALVISO   0x06040000 MSFT 
0x0100000E)
ACPI: FACS @ 0x0x3f6fafc0/0x0040
ACPI: APIC @ 0x0x3f6e9efc/0x0068 (v001 INTEL  ALVISO   0x06040000 LOHR 
0x0000005F)
ACPI: BOOT @ 0x0x3f6e9fd8/0x0028 (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 
0x00000001)
ACPI: MCFG @ 0x0x3f6e9f9c/0x003C (v001 INTEL  ALVISO   0x06040000 LOHR 
0x0000005F)
ACPI: SSDT @ 0x0x3f6e6078/0x01DE (v001  PmRef  Cpu0Cst 0x00003001 INTL 
0x20030224)
ACPI: SSDT @ 0x0x3f6e5e7d/0x01FB (v001  PmRef    CpuPm 0x00003000 INTL 
0x20030224)
cpu0 at mainbus0 apid 0: (boot processor)
cpu0: Intel Pentium M (Dothan) (686-class), 1496.52 MHz, id 0x6d8
cpu0: features afe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features afe9fbff<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu0: features afe9fbff<FXSR,SSE,SSE2,SS,TM,SBF>
cpu0: features3 100000<XD>
cpu0: "Intel(R) Celeron(R) M processor         1.50GHz"
cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu0: ITLB 128 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 128 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: using thermal monitor 1
cpu0: Initial APIC ID 0
cpu0: Cluster/Package ID 0
cpu0: calibrating local timer
cpu0: apic clock running at 99 MHz
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20080321
acpi0: X/RSDT: OemId <PTLTD ,  RSDT  ,06040000>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
CPU0 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU1 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
AMW0 (pnp0c14) at acpi0 not configured
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
PCI0 (PNP0A08) at acpi0 not configured
LNKA (PNP0C0F) at acpi0 not configured
LNKB (PNP0C0F) at acpi0 not configured
LNKC (PNP0C0F) at acpi0 not configured
LNKD (PNP0C0F) at acpi0 not configured
LNKE (PNP0C0F) at acpi0 not configured
LNKF (PNP0C0F) at acpi0 not configured
LNKG (PNP0C0F) at acpi0 not configured
LNKH (PNP0C0F) at acpi0 not configured
acpiec0 at acpi0 (EC0, PNP0C09): ACPI Embedded Controller
acpiec0: io 0x62,0x66
BAT0 (PNP0C0A) at acpi0 not configured
acpiacad0 at acpi0 (ADP1, ACPI0003): ACPI AC Adapter
DMAC (PNP0200) at acpi0 not configured
FWHD (INT0800) at acpi0 not configured
IPIC (PNP0000) at acpi0 not configured
MATH (PNP0C04) at acpi0 not configured
MBD0 (PNP0C02) at acpi0 not configured
RTC (PNP0B00) at acpi0 not configured
attimer0 at acpi0 (TIMR, PNP0100): AT Timer
attimer0: io 0x40-0x43,0x50-0x53 irq 0
pckbc0 at acpi0 (KBD0, PNP0303): kbd port
pckbc0: io 0x60,0x64 irq 1
PS2M (SYN0302) at acpi0 not configured
acpitz0 at acpi0 (TZS0): critical 100.0C passive 74.0C, passive cooling
acpitz1 at acpi0 (TZS1): critical 70.0C, passive cooling
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82915PM/GM/GMS,82910GML Host Bridge (rev. 0x03)
pchb0: timeout reading test samples, RNG disabled.
agp0 at pchb0: detected 7932k stolen memory
agp0: aperture at 0xc0000000, size 0x10000000
vga0 at pci0 dev 2 function 0: Intel 82915GM/GMS,82910GML Integrated Graphics 
Device (rev. 0x03)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
direct rendering for vga0 unsupported
Intel 82915GM/GMS IGD Companion (miscellaneous display, revision 0x03) at pci0 
dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0: Intel 82801FB/FR USB UHCI Controller (rev. 
0x03)
uhci0: interrupting at ioapic0 pin 23 (irq 11)
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: Intel 82801FB/FR USB UHCI Controller (rev. 
0x03)
uhci1: interrupting at ioapic0 pin 17 (irq 11)
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: Intel 82801FB/FR USB UHCI Controller (rev. 
0x03)
uhci2: interrupting at ioapic0 pin 18 (irq 11)
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: Intel 82801FB/FR USB UHCI Controller (rev. 
0x03)
uhci3: interrupting at ioapic0 pin 23 (irq 11)
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: Intel 82801FB/FR USB EHCI Controller (rev. 
0x03)
ehci0: interrupting at ioapic0 pin 23 (irq 11)
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb0 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xd3)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
Broadcom BCM4318 AirForce One 54g (miscellaneous network, revision 0x02) at 
pci1 dev 5 function 0 not configured
rtk0 at pci1 dev 7 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at ioapic0 pin 20 (irq 10)
rtk0: Ethernet address 00:0a:e4:e3:60:a2
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0 at pci1 dev 9 function 0: ENE Technology CB1410 CardBus Controller (rev. 
0x01)
cbb0: cacheline 0x10 lattimer 0x40
cbb0: bhlc 0x24010
cbb0: interrupting at ioapic0 pin 22 (irq 10)
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2
pcmcia0 at cardslot0
auich0 at pci0 dev 30 function 2: i82801FB (ICH6) AC-97 Audio
auich0: interrupting at ioapic0 pin 21 (irq 10)
auich0: ac97: Avance Logic ALC655 codec; no 3D stereo
auich0: ac97: ext id 9c4<AC97_23,LDAC,SDAC,CDAC,SPDIF>
Intel 82801FB/FR AC'97 Modem Controller (modem communications, revision 0x03) 
at pci0 dev 30 function 3 not configured
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801FBM ICH6M LPC Interface Bridge (rev. 0x03)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801FB IDE Controller (ICH6) (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
ichsmb0 at pci0 dev 31 function 3: Intel 82801FB/FR SMBus Controller (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 17 (irq 11)
iic0 at ichsmb0: I2C bus
spdmem0 at iic0 addr 0x50
spdmem0: DDR2 SDRAM memory, no parity or ECC, 512MB, 400MHz, PC2-3200
spdmem0: 14 rows, 10 cols, 1 ranks, 4 banks/chip, 5.00ns cycle time
spdmem0: voltage SSTL 1.8V, refresh time 7.8us (self-refreshing)
spdmem1 at iic0 addr 0x52
spdmem1: DDR2 SDRAM memory, no parity or ECC, 512MB, 400MHz, PC2-3200
spdmem1: 14 rows, 10 cols, 1 ranks, 4 banks/chip, 5.00ns cycle time
spdmem1: voltage SSTL 1.8V, refresh time 7.8us (self-refreshing)
isa0 at pcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
attimer0: attached to pcppi0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
audio0 at auich0: full duplex, independent
acpiacad0: AC adapter online.
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 1: <Slimtype COMBO SOSC-2483K, , KCK2> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0 at atabus0 drive 0: <HTS424040M9AT00>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
cd0(piixide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Justcom Technology USB KVM Switch, rev 1.10/1.00, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1
uhidev1: Justcom Technology USB KVM Switch, rev 1.10/1.00, addr 2, iclass 3/1
ums0 at uhidev1: 5 buttons and Z dir.
wsmouse1 at ums0 mux 0
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)