Port-i386 archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: No sound on Eee PC 900 (Realtek ALC662-GR)
Hello,
Booting the same Linux (Ubuntu) distribution on both Eee PC show slight
differences between the two audio cards. Especially :
--- ASUS Eee PC 701/Ubuntu 8.04/card0_codec.txt 2008-06-29
16:01:03.780219000 +0000
+++ ASUS Eee PC 900/Ubuntu 8.04/card0_codec.txt 2008-06-29
15:42:03.088886000 +0000
@@ -2,5 +2,5 @@
Address: 0
Vendor Id: 0x10ec0662
-Subsystem Id: 0x104382a1
+Subsystem Id: 0x10438337
Would this explain the issue ?
Regards,
Jo
> Hello,
>
> I already posted on current-users@ but didn't get an answer.
> I hope to be luckier here.
>
> ----- Forwarded message from Joel CARNAT <joel%carnat.net@localhost> -----
>
> There is no sound out of my Eee PC 900.
> Using the same customized kernel on Eee PC 701, the sound is OK.
> I'm using the same mixerctl values too.
>
> Using a 4.99.66 GENERIC on the 900 provides no sound either.
>
> So far, I saw the following weird line in dmesg:
> ###############
> azalia0 at pci0 dev 27 function 0: Generic High Definition Audio
> Controller
> azalia0: interrupting at ioapic0 pin 16
> azalia0: host: 0x8086/0x2668 (rev. 4), HDA rev. 1.0
> wd0 at atabus1 drive 0azalia0: codec[0]: Realtek ALC662-GR (rev. 1.1), HDA
> rev. 1.0
> audio0 at azalia0: full duplex, independent
> ###############
>
> Mixed wd0 and azalia0 on the same line is not there on Eee PC 701.
> Find full dmesg and mixerctl attached.
>
> Any thoughts ?
> TIA,
> Jo
>
>
> NetBSD 4.99.66 (GENERIC) #0: Wed Jun 25 00:06:05 PDT 2008
>
> builds@wb35:/home/builds/ab/HEAD/i386/200806240002Z-obj/home/builds/ab/HEAD/src/sys/arch/i386/compile/GENERIC
> total memory = 2039 MB
> avail memory = 1990 MB
> timecounter: Timecounters tick every 10.000 msec
> timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
> ASUSTeK Computer INC. 900 (0501)
> mainbus0 (root)
> cpu0 at mainbus0 apid 0: Intel 686-class, 900MHz, id 0x6d8
> ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
> acpi0 at mainbus0: Intel ACPICA 20080321
> acpi0: X/RSDT: OemId <A M I ,OEMRSDT ,06000810>, AslId <MSFT,00000097>
> acpi0: SCI interrupting at int 9
> acpi0: fixed-feature power button present
> timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
> ACPI-Safe 24-bit timer
> attimer1 at acpi0 (TMR, PNP0100): AT Timer
> attimer1: io 0x40-0x43 irq 0
> pckbc1 at acpi0 (PS2K, PNP0303): kbd port
> pckbc1: io 0x60,0x64 irq 1
> pckbc2 at acpi0 (PS2M, SYN0A00): aux port
> pckbc2: irq 12
> pcppi1 at acpi0 (SPKR, PNP0800)
> pcppi1: io 0x61
> midi0 at pcppi1: PC speaker (CPU-intensive output)
> sysbeep0 at pcppi1
> npx1 at acpi0 (COPR, PNP0C04)
> npx1: io 0xf0-0xff irq 13
> npx1: reported by CPUID; using exception 16
> acpiec0 at acpi0 (EC0, PNP0C09): ACPI Embedded Controller
> acpiec0: io 0x62,0x66
> acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery (Control Method)
> acpibat0: battery info: ASUS, LION, 900
> acpiacad0 at acpi0 (AC0, ACPI0003): ACPI AC Adapter
> asus0 at acpi0 (ATKD, ASUS010-16843008)
> acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
> acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
> acpibut1 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
> acpitz0 at acpi0 (TZ00): critical 90.0C, passive cooling
> apm0 at acpi0: Power Management spec V1.2
> pckbd0 at pckbc1 (kbd slot)
> pckbc1: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard
> pms0 at pckbc1 (aux slot)
> pckbc1: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> attimer1: attached to pcppi1
> pci0 at mainbus0 bus 0: configuration mode 1
> pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
> pchb0 at pci0 dev 0 function 0
> pchb0: vendor 0x8086 product 0x2590 (rev. 0x04)
> pchb0: returns constant 0xff stream, RNG disabled.
> agp0 at pchb0: detected 7932k stolen memory
> agp0: aperture at 0xd0000000, size 0x10000000
> vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x2592 (rev. 0x04)
> wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using
> wskbd0
> wsmux1: connecting to wsdisplay0
> drm at vga1 not configured
> vendor 0x8086 product 0x2792 (miscellaneous display, revision 0x04) at
> pci0 dev 2 function 1 not configured
> azalia0 at pci0 dev 27 function 0: Generic High Definition Audio
> Controller
> azalia0: interrupting at ioapic0 pin 16
> azalia0: host: 0x8086/0x2668 (rev. 4), HDA rev. 1.0
> ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x2660 (rev. 0x04)
> pci1 at ppb0 bus 4
> pci1: no spaces enabled!
> ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x2662 (rev. 0x04)
> pci2 at ppb1 bus 3
> pci2: memory space enabled, rd/line, wr/inv ok
> lii0 at pci2 dev 0 function 0: Attansic/Atheros L2 Fast Ethernet
> lii0: Ethernet address 00:22:15:02:48:6d
> lii0: interrupting at ioapic0 pin 17
> ukphy0 at lii0 phy 1: Generic IEEE 802.3u media interface
> ukphy0: OUI 0x00c82e, model 0x0002, rev. 2
> ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x2664 (rev. 0x04)
> pci3 at ppb2 bus 1
> pci3: memory space enabled, rd/line, wr/inv ok
> ath0 at pci3 dev 0 function 0
> ath0: interrupting at ioapic0 pin 18
> ath0: unable to attach hardware; HAL status 13
> uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2658 (rev. 0x04)
> uhci0: interrupting at ioapic0 pin 23
> usb0 at uhci0: USB revision 1.0
> uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x2659 (rev. 0x04)
> uhci1: interrupting at ioapic0 pin 19
> usb1 at uhci1: USB revision 1.0
> uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x265a (rev. 0x04)
> uhci2: interrupting at ioapic0 pin 18
> usb2 at uhci2: USB revision 1.0
> uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x265b (rev. 0x04)
> uhci3: interrupting at ioapic0 pin 16
> usb3 at uhci3: USB revision 1.0
> ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x265c (rev. 0x04)
> ehci0: interrupting at ioapic0 pin 23
> ehci0: EHCI version 1.0
> ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
> usb4 at ehci0: USB revision 2.0
> ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xd4)
> pci4 at ppb3 bus 5
> pci4: no spaces enabled!
> pcib0 at pci0 dev 31 function 0
> pcib0: vendor 0x8086 product 0x2641 (rev. 0x04)
> piixide0 at pci0 dev 31 function 2
> piixide0: Intel 82801FBM Serial ATA Controller (ICH6) (rev. 0x04)
> piixide0: bus-master DMA support present
> piixide0: primary channel wired to compatibility mode
> piixide0: primary channel interrupting at ioapic0 pin 14
> atabus0 at piixide0 channel 0
> piixide0: secondary channel wired to compatibility mode
> piixide0: secondary channel interrupting at ioapic0 pin 15
> atabus1 at piixide0 channel 1
> ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x266a (rev.
> 0x04)
> ichsmb0: interrupting at ioapic0 pin 19
> iic0 at ichsmb0: I2C bus
> isa0 at pcib0
> timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
> acpiacad0: AC adapter online.
> wd0 at atabus1 drive 0azalia0: codec[0]: Realtek ALC662-GR (rev. 1.1), HDA
> rev. 1.0
> audio0 at azalia0: full duplex, independent
> : <ASUS-PHISON OB SSD>
> wd0: drive supports 1-sector PIO transfers, LBA addressing
> wd0: 3847 MB, 7818 cyl, 16 head, 63 sec, 512 bytes/sect x 7880544 sectors
> uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr
> 1
> uhub0: 2 ports with 2 removable, self powered
> uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr
> 1
> uhub1: 2 ports with 2 removable, self powered
> uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr
> 1
> uhub2: 2 ports with 2 removable, self powered
> uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr
> 1
> uhub3: 2 ports with 2 removable, self powered
> uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr
> 1
> uhub4: 8 ports with 8 removable, self powered
> wd0: 32-bit data port
> wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
> wd1 at atabus1 drive 1: <ASUS-PHISON SSD>
> wd1: drive supports 1-sector PIO transfers, LBA addressing
> wd1: 7695 MB, 15636 cyl, 16 head, 63 sec, 512 bytes/sect x 15761088
> sectors
> wd1: 32-bit data port
> wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
> wd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using
> DMA)
> wd1(piixide0:1:1): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using
> DMA)
> umass0 at uhub4 port 5 configuration 1 interface 0
> umass0: ENE UB6225, rev 2.00/1.00, addr 2
> umass0: using SCSI over Bulk-Only
> scsibus0 at umass0: 2 targets, 1 lun per target
> sd0 at scsibus0 target 0 lun 0: <USB2.0, CardReader SD0, 0100> disk
> removable
> uhidev0 at uhub1 port 1 configuration 1 interface 0
> uhidev0: vendor 0x062a product 0x0000, rev 1.10/0.00, addr 2, iclass 3/1
> ums0 at uhidev0: 3 buttons and Z dir.
> wsmouse1 at ums0 mux 0
> sd0: fabricating a geometry
> sd0: 15326 MB, 15326 cyl, 64 head, 32 sec, 512 bytes/sect x 31388672
> sectors
> sd0: fabricating a geometry
> ugen0 at uhub4 port 8
> ugen0: vendor 0x05e3 USB 2.0 Camera, rev 2.00/2.27, addr 3
> Kernelized RAIDframe activated
> cmos: attached.
> pad0: outputs: 44100Hz, 16-bit, stereo
> audio1 at pad0: half duplex
> boot device: wd0
> root on wd0a dumps on wd0b
> root file system type: ffs
> wsdisplay0: screen 1 added (80x25, vt100 emulation)
> wsdisplay0: screen 2 added (80x25, vt100 emulation)
> wsdisplay0: screen 3 added (80x25, vt100 emulation)
> wsdisplay0: screen 4 added (80x25, vt100 emulation)
>
> outputs.master=255,255
> outputs.master.mute=off
> outputs.speaker.mute=off
> outputs.speaker.boost=off
> outputs.headphones.mute=off
> outputs.headphones.boost=off
> inputs.dac=255,255
> inputs.dac.mute=off
> inputs.dac.front=255,255
> inputs.dac.surround=126,126
> inputs.dac.clfe=126,126
> inputs.mic=120,120
> inputs.mic.mute=off
> inputs.mic2=120,120
> inputs.mic2.mute=off
> inputs.mic.dir=input
> inputs.mic2.dir=input
> inputs.line.dir=input
> inputs.line2.dir=output
>
>
>
>
> ----- End forwarded message -----
>
--- ASUS Eee PC 701/Ubuntu 8.04/card0_codec.txt 2008-06-29 16:01:03.780219000
+0000
+++ ASUS Eee PC 900/Ubuntu 8.04/card0_codec.txt 2008-06-29 15:42:03.088886000
+0000
@@ -2,5 +2,5 @@
Address: 0
Vendor Id: 0x10ec0662
-Subsystem Id: 0x104382a1
+Subsystem Id: 0x10438337
Revision Id: 0x100101
No Modem Function Group found
@@ -16,5 +16,5 @@
Node 0x02 [Audio Output] wcaps 0x1d: Stereo Amp-Out
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
- Amp-Out vals: [0x40 0x40]
+ Amp-Out vals: [0x28 0x28]
Converter: stream=0, channel=0
PCM:
@@ -24,5 +24,5 @@
Node 0x03 [Audio Output] wcaps 0x1d: Stereo Amp-Out
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
- Amp-Out vals: [0x40 0x40]
+ Amp-Out vals: [0x00 0x00]
Converter: stream=0, channel=0
PCM:
@@ -32,5 +32,5 @@
Node 0x04 [Audio Output] wcaps 0x1d: Stereo Amp-Out
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
- Amp-Out vals: [0x40 0x40]
+ Amp-Out vals: [0x00 0x00]
Converter: stream=0, channel=0
PCM:
@@ -61,5 +61,5 @@
Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Amp-In caps: ofs=0x09, nsteps=0x1f, stepsize=0x05, mute=1
- Amp-In vals: [0x80 0x80]
+ Amp-In vals: [0x00 0x00]
Converter: stream=0, channel=0
SDI-Select: 0
@@ -100,5 +100,5 @@
Amp-Out vals: [0x00 0x00]
Pincap 0x081003c: IN OUT HP EAPD Detect
- EAPD 0x0:
+ EAPD 0x2: EAPD
Pin Default 0x99130110: [Fixed] Speaker at Int ATAPI
Conn = ATAPI, Color = Unknown
@@ -111,12 +111,12 @@
Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
- Amp-Out vals: [0x00 0x00]
+ Amp-Out vals: [0x80 0x80]
Pincap 0x0810034: IN OUT EAPD Detect
- EAPD 0x0:
+ EAPD 0x2: EAPD
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
- Pin-ctls: 0x40: OUT
+ Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Connection: 1
@@ -124,5 +124,5 @@
Node 0x16 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
- Amp-Out vals: [0x00 0x00]
+ Amp-Out vals: [0x80 0x80]
Pincap 0x0834: IN OUT Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
@@ -130,5 +130,5 @@
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
- Pin-ctls: 0x40: OUT
+ Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Connection: 1
@@ -146,5 +146,5 @@
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
- Unsolicited: tag=08, enabled=1
+ Unsolicited: tag=00, enabled=0
Connection: 1
0x0e
@@ -199,7 +199,7 @@
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
Pincap 0x0820: IN
- Pin Default 0x40148a05: [N/A] Speaker at Ext N/A
- Conn = RCA, Color = Purple
- DefAssociation = 0x0, Sequence = 0x5
+ Pin Default 0x40168a2d: [N/A] Speaker at Ext N/A
+ Conn = Digital, Color = Purple
+ DefAssociation = 0x2, Sequence = 0xd
Pin-ctls: 0x20: IN
Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital
@@ -218,10 +218,10 @@
Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
- Amp-In vals: [0x80 0x80] [0x00 0x00] [0x00 0x00] [0x80 0x80] [0x00 0x00]
[0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
+ Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
[0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 10
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x0b
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
- Amp-In vals: [0x80 0x80] [0x00 0x00] [0x00 0x00] [0x80 0x80] [0x00 0x00]
[0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
+ Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
[0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 10
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x0b
Home |
Main Index |
Thread Index |
Old Index