vr0: transmit aborted - errors after update from 3.1 to 5.0_BETA

To: port-i386%NetBSD.org@localhost
Subject: vr0: transmit aborted - errors after update from 3.1 to 5.0_BETA
From: "David Lord" <netbsd%lordynet.org@localhost>
Date: Sun, 14 Dec 2008 03:38:57 -0000
vr0: transmit aborted - errors after update from 3.1 to 5.0_BETA

Help!

I've just attempted to update a VIA C3 EPIA Mini-ITX system from
NetBSD-3.1 to NetBSD-5.0_BETA but now have problem with network
transfers causing "vr0: transmit aborted" messages.

Prior to update I backed up much of this system over the lan via
nfs and same network interface without noticing any problem except
that transfer seemed slow compared to other systems I use.

I have another PD6000E system on a more recent 3.1.0 and an ME6000G
(Via C3 Nehemiah) system on 4.0 that I'd also like to update to 5.0
for wapbl.

Dmesg from 3.1 and 5.0_B are below.



NetBSD 3.1_RC1 (PD6000E1_0.23) #0: Fri Aug 25 04:21:47 GMT 2006
        
zardoz@dhcp-0-13-46-61-c4-32:/usr/src/sys/arch/i386/compile/PD6000E1_0.23
total memory = 1007 MB
avail memory = 981 MB
BIOS32 rev. 0 found at 0xface0
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: VIA C3 Samuel 2/Ezra (686-class), 601.39 MHz, id 0x673
cpu0: features 80803035<FPU,DE,TSC,MSR,MTRR>
cpu0: features 80803035<PGE,MMX>
cpu0: features 80803035<3DNOW>
cpu0: "VIA Samuel 2"
cpu0: I-cache 64 KB 32B/line 4-way, D-cache 64 KB 32B/line 4-way
cpu0: L2 cache 64 KB 32B/line 4-way
cpu0: ITLB 128 4 KB entries 8-way
cpu0: DTLB 128 4 KB entries 8-way
cpu0: 4 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies VT8623 (Apollo CLE266) CPU-PCI Bridge (rev. 0x00)
agp0 at pchb0: aperture at 0xe7000000, size 0xe400000
ppb0 at pci0 dev 1 function 0: VIA Technologies VT8633 (Apollo Pro 266) CPU-AGP 
Bridge (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: VIA Technologies VT8623 (Apollo CLE266) VGA 
Controller (rev. 0x03)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
vr0 at pci0 dev 15 function 0: VIA VT6105 (Rhine III) 10/100 Ethernet
vr0: interrupting at irq 9
vr0: Ethernet address: 00:40:63:e2:11:c6
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0002c6, model 0x0034, rev. 9
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
uhci0 at pci0 dev 16 function 0: VIA Technologies VT83C572 USB Controller (rev. 
0x80)
uhci0: interrupting at irq 12
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1: VIA Technologies VT83C572 USB Controller (rev. 
0x80)
uhci1: interrupting at irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2: VIA Technologies VT83C572 USB Controller (rev. 
0x80)
uhci2: interrupting at irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 3: VIA Technologies VT8237 EHCI USB Controller 
(rev. 0x82)
ehci0: interrupting at irq 9
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: VIA Technologie EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: single transaction translator
uhub3: 6 ports with 6 removable, self powered
pcib0 at pci0 dev 17 function 0
pcib0: VIA Technologies VT8235 (Apollo KT400) PCI-ISA Bridge (rev. 0x00)
viaide0 at pci0 dev 17 function 1
viaide0: VIA Technologies VT8235 ATA133 controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
auvia0 at pci0 dev 17 function 5: VIA Technologies VT8235 AC'97 Audio (rev 0x50)
auvia0: interrupting at irq 11
auvia0: ac97: VIA Technologies VT1612A codec; headphone, 18 bit DAC, 18 bit 
ADC, KS Waves 3D
auvia0: ac97: ext id 201<AMAP,VRA>
audio0 at auvia0: full duplex, mmap, independent
vr1 at pci0 dev 18 function 0: VIA VT6102 (Rhine II) 10/100 Ethernet
vr1: interrupting at irq 12
vr1: Ethernet address: 00:40:63:e2:11:4e
ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface
ukphy1: OUI 0x0002c6, model 0x0032, rev. 10
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rtk0 at pci0 dev 20 function 0: Realtek 8139 10/100BaseTX
rtk0: interrupting at irq 11
rtk0: Ethernet address 00:0e:2e:91:84:a8
ukphy2 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy2: OUI 0x000000, model 0x0000, rev. 0
ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
com2 at isa0 port 0x3e8-0x3ef irq 5: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
isapnp0: no ISA Plug 'n Play devices found
Kernelized RAIDframe activated
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 1: <CD-RW   CDR-6S52, , 6SG1> cdrom removable
cd0: 32-bit data port
viaide0:0:1: lost interrupt
        type: ata tc_bcount: 0 tc_skip: 0
cd0: drive supports PIO mode 4viaide0:0:1: lost interrupt
        type: ata tc_bcount: 0 tc_skip: 0
, DMA mode 2viaide0:0:1: lost interrupt
        type: ata tc_bcount: 0 tc_skip: 0
, Ultra-DMA mode 2 (Ultra/33)
wd0 at atabus0 drive 0: <WDC WD2500JB-00GVC0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
cd0(viaide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)


NetBSD  5.0_BETA NetBSD 5.0_BETA (GENERIC) #0: Thu Nov 13 06:36:57 PST 2008  
builds@wb24:/home/builds/ab/netbsd-5/i386/200811130002Z-obj/home/builds/ab/netbsd-5/src/sys/arch/i386/compile/GENERIC
 i386

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0_BETA (GENERIC) #0: Thu Nov 13 06:36:57 PST 2008
        
builds@wb24:/home/builds/ab/netbsd-5/i386/200811130002Z-obj/home/builds/ab/netbsd-5/src/sys/arch/i386/compile/GENERIC
total memory = 1007 MB
avail memory = 978 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
VIA Technologies, Inc. VT8623-8235 ( )
mainbus0 (root)
cpu0 at mainbus0: IDT/VIA 686-class, 601MHz, id 0x673
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <VT9174,AWRDACPI,42302e31>, AslId <AWRD,00000000>
LNKB: ACPI: Found matching pin for 0.20.INTA at func 0: 11
LNKA: ACPI: Found matching pin for 0.16.INTA at func 0: 12
LNKB: ACPI: Found matching pin for 0.16.INTB at func 1: 11
LNKC: ACPI: Found matching pin for 0.16.INTC at func 2: 11
LNKD: ACPI: Found matching pin for 0.16.INTD at func 3: 9
LNKA: ACPI: Found matching pin for 0.17.INTA at func 1: 255
LNKC: ACPI: Found matching pin for 0.17.INTC at func 5: 11
LNKA: ACPI: Found matching pin for 0.18.INTA at func 0: 12
LNKD: ACPI: Found matching pin for 0.15.INTA at func 0: 9
LNKA: ACPI: Found matching pin for 1.0.INTA at func 0: 12
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (COPR, PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
UAR1 (PNP0501) at acpi0 not configured
UAR2 (PNP0501) at acpi0 not configured
LPT1 (PNP0400) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
UAR3 (PNP0501) at acpi0 not configured
UAR4 (PNP0501) at acpi0 not configured
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1106 product 0x3123 (rev. 0x00)
agp0 at pchb0 (v2): aperture at 0xe7000000, size 0xe400000
ppb0 at pci0 dev 1 function 0: vendor 0x1106 product 0xb091 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: vendor 0x1106 product 0x3122 (rev. 0x03)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
vr0 at pci0 dev 15 function 0: VIA VT6105 (Rhine III) 10/100 Ethernet
vr0: interrupting at irq 9
vr0: Ethernet address: 00:40:63:e2:11:c6
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0002c6, model 0x0034, rev. 9
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
uhci0 at pci0 dev 16 function 0: vendor 0x1106 product 0x3038 (rev. 0x80)
uhci0: interrupting at irq 12
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 16 function 1: vendor 0x1106 product 0x3038 (rev. 0x80)
uhci1: interrupting at irq 11
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 16 function 2: vendor 0x1106 product 0x3038 (rev. 0x80)
uhci2: interrupting at irq 11
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 16 function 3: vendor 0x1106 product 0x3104 (rev. 0x82)
ehci0: interrupting at irq 9
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
pcib0 at pci0 dev 17 function 0
pcib0: vendor 0x1106 product 0x3177 (rev. 0x00)
viaide0 at pci0 dev 17 function 1
viaide0: VIA Technologies VT8235 ATA133 controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
auvia0 at pci0 dev 17 function 5: VIA Technologies VT8235 AC'97 Audio (rev 0x50)
auvia0: interrupting at irq 11
auvia0: ac97: VIA Technologies VT1612A codec; headphone, 18 bit DAC, 18 bit 
ADC, KS Waves 3D
auvia0: ac97: ext id 201<AMAP,VRA>
audio0 at auvia0: full duplex, mmap, independent
vr1 at pci0 dev 18 function 0: VIA VT6102 (Rhine II) 10/100 Ethernet
vr1: interrupting at irq 12
vr1: Ethernet address: 00:40:63:e2:11:4e
ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface
ukphy1: OUI 0x0002c6, model 0x0032, rev. 10
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rtk0 at pci0 dev 20 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at irq 11
rtk0: Ethernet address 00:0e:2e:91:84:a8
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
com2 at isa0 port 0x3e8-0x3ef irq 5: ns16550a, working fifo
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x1106 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 1: <CD-RW   CDR-6S52, , 6SG1> cdrom removable
cd0: 32-bit data port
viaide0:0:1: lost interrupt
        type: ata tc_bcount: 0 tc_skip: 0
cd0: drive supports PIO mode 4viaide0:0:1: lost interrupt
        type: ata tc_bcount: 0 tc_skip: 0
, DMA mode 2viaide0:0:1: lost interrupt
        type: ata tc_bcount: 0 tc_skip: 0
, Ultra-DMA mode 2 (Ultra/33)
wd0 at atabus0 drive 0: <WDC WD2500JB-00GVC0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
cd0(viaide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
Follow-Ups:
- Re: vr0: transmit aborted - errors after update from 3.1 to 5.0_BETA
  - From: David Lord
Prev by Date: Re: default kern.ipc.shmmaxpgs is too low
Next by Date: Re: vr0: transmit aborted - errors after update from 3.1 to 5.0_BETA
Previous by Thread: default kern.ipc.shmmaxpgs is too low
Next by Thread: Re: vr0: transmit aborted - errors after update from 3.1 to 5.0_BETA
Indexes:
Home | Main Index | Thread Index | Old Index