XFree86 driver for Intel Mainboard DG33FB

[Video Mike <bsdfun%comcast.net@localhost>]

Dear NetBSD,

NetBSD seems to boot up and work just fine on an Intel DG33FB
mainboard, but, there appears to be no support for the on board
VGA adapter.  I have included a dump from dmesg if anyone could
give me some tips on locating a driver for this board.

Also if you look through the dmesg dump you will see "lost interrupt"
for the IDE interface for the CD-540 CD Rom drive.  I have tried
connecting a hard drive to the same port with the same results.
This seems to plague many NetBSD versions that I have tested in the
past.  Maybe I have the kernel configured incorrectly.  The SATA
hard drive interface appears to be just fine.

Any help is appreciated as always.

<VideoMike>

--------------------------------------------------
dmesg output dump for Intel DG33FB Mainboard NetBSD v4.0.1
--------------------------------------------------
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.0.1 (GENERIC) #0: Tue Oct  7 22:58:48 PDT 2008
        
builds@wb30:/home/builds/ab/netbsd-4-0-1-RELEASE/i386/200810080053Z-obj/home/builds/ab/netbsd-4-0-1-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 3314 MB
rbus: rbus_min_start set to 0xc0000000
avail memory = 3245 MB
timecounter: Timecounters tick every 10.000 msec
RTC BIOS diagnostic error 80<clock_battery>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel Pentium III (Katmai) (686-class), 2533.53 MHz, id 0x10676
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 8e39d<SSE3,MONITOR,DS-CPL,EST,TM2,xTPR>
cpu0: "Intel(R) Core(TM)2 Duo CPU     E7200  @ 2.53GHz"
cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu0: using thermal monitor 1
est_init_main: unknown system bus clock
cpu0: calibrating local timer
cpu0: apic clock running at 266 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: not started
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0
ioapic0: remapped to apic 2
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <INTEL ,DG33FB  ,000001e4>, AslId <    ,01000013>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
mpacpi: could not get bus number, assuming bus 0
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpibut0 at acpi0 (PNP0C0E): ACPI Sleep Button
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0 irq 13
npx1: reported by CPUID; using exception 16
attimer1 at acpi0 (PNP0100): AT Timer
attimer1: io 0x40-0x43,0x50-0x53 irq 0
pcppi1 at acpi0 (PNP0800)
pcppi1: io 0x61
pcppi1: children must have an explicit unit
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0700 [PC standard floppy disk controller] at acpi0 not configured
pckbc1 at acpi0 (PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
PNP0501 [16550A-compatible COM port] at acpi0 not configured
PNP0003 [APIC] at acpi0 not configured
pcppi1: attached to attimer1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel product 0x29c0 (rev. 0x02)
vga1 at pci0 dev 2 function 0: Intel product 0x29c2 (rev. 0x02)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
Intel product 0x29c4 (miscellaneous communications, revision 0x02) at pci0 dev 
3 function 0 not configured
wm0 at pci0 dev 25 function 0: 82801I (C) LAN Controller, rev. 2
wm0: interrupting at ioapic0 pin 20 (irq 9)
wm0: PCI-Express bus
wm0: FLASH
wm0: Ethernet address 00:1c:c0:93:ba:88
uhci0 at pci0 dev 26 function 0: Intel product 0x2937 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 18 (irq 10)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 26 function 1: Intel product 0x2938 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 21 (irq 11)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 26 function 2: Intel product 0x2939 (rev. 0x02)
uhci2: interrupting at ioapic0 pin 17 (irq 9)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 26 function 7: Intel product 0x293c (rev. 0x02)
ehci0: interrupting at ioapic0 pin 17 (irq 9)
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 22 (irq 10)
azalia0: host: 0x8086/0x293e (rev. 2)
azalia0: host: High Definition Audio rev. 1.0
ppb0 at pci0 dev 28 function 0: Intel product 0x2940 (rev. 0x02)
pci1 at ppb0 bus 1
pci1: no spaces enabled!
ppb1 at pci0 dev 28 function 1: Intel product 0x2942 (rev. 0x02)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
pciide0 at pci2 dev 0 function 0
pciide0: Marvell product 0x6101 (rev. 0xb2)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel configured to native-PCI mode
pciide0: using ioapic0 pin 17 (irq 9) for native-PCI interrupt
atabus0 at pciide0 channel 0
pciide0: secondary channel configured to native-PCI mode
atabus1 at pciide0 channel 1
ppb2 at pci0 dev 28 function 2: Intel product 0x2944 (rev. 0x02)
pci3 at ppb2 bus 3
pci3: no spaces enabled!
ppb3 at pci0 dev 28 function 3: Intel product 0x2946 (rev. 0x02)
pci4 at ppb3 bus 4
pci4: no spaces enabled!
ppb4 at pci0 dev 28 function 4: Intel product 0x2948 (rev. 0x02)
pci5 at ppb4 bus 5
pci5: no spaces enabled!
uhci3 at pci0 dev 29 function 0: Intel product 0x2934 (rev. 0x02)
uhci3: interrupting at ioapic0 pin 23 (irq 11)
usb4 at uhci3: USB revision 1.0
uhub4 at usb4
uhub4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhci4 at pci0 dev 29 function 1: Intel product 0x2935 (rev. 0x02)
uhci4: interrupting at ioapic0 pin 19 (irq 11)
usb5 at uhci4: USB revision 1.0
uhub5 at usb5
uhub5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhci5 at pci0 dev 29 function 2: Intel product 0x2936 (rev. 0x02)
uhci5: interrupting at ioapic0 pin 18 (irq 10)
usb6 at uhci5: USB revision 1.0
uhub6 at usb6
uhub6: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
ehci1 at pci0 dev 29 function 7: Intel product 0x293a (rev. 0x02)
ehci1: interrupting at ioapic0 pin 23 (irq 11)
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci3 uhci4 uhci5
usb7 at ehci1: USB revision 2.0
uhub7 at usb7
uhub7: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub7: 6 ports with 6 removable, self powered
ppb5 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0x92)
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled
ex0 at pci6 dev 0 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt (rev. 
0x78)
ex0: interrupting at ioapic0 pin 21 (irq 11)
ex0: MAC address 00:04:75:e5:a9:c3
exphy0 at ex0 phy 24: 3Com internal media interface
exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fwohci0 at pci6 dev 3 function 0: Texas Instruments TSB43AA22/A IEEE 1394 Host 
Controller (rev. 0x00)
fwohci0: interrupting at ioapic0 pin 19 (irq 11)
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:90:27:00:02:3a:55:e6
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
pcib0 at pci0 dev 31 function 0
pcib0: Intel product 0x2912 (rev. 0x02)
piixide0 at pci0 dev 31 function 2
piixide0: Intel 82801I Serial ATA Controller (ICH9) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus2 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus3 at piixide0 channel 1
Intel product 0x2930 (SMBus serial bus, revision 0x02) at pci0 dev 31 function 
3 not configured
piixide1 at pci0 dev 31 function 5
piixide1: Intel 82801I Serial ATA Controller (ICH9) (rev. 0x02)
piixide1: bus-master DMA support present
piixide1: primary channel wired to native-PCI mode
piixide1: using ioapic0 pin 21 (irq 11) for native-PCI interrupt
atabus4 at piixide1 channel 0
piixide1: secondary channel wired to native-PCI mode
atabus5 at piixide1 channel 1
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
ioapic0: enabling
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
ieee1394if0: bus manager 0 (me)
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia0: codec[2]: Realtek ALC888 (rev. 0.1)
azalia0: codec[2]: High Definition Audio rev. 1.0
azalia0: playback: max channels=8, encodings=1<PCM>
azalia0: playback: PCM 
formats=e0560<24bit,20bit,16bit,192kHz,96kHz,48kHz,44.1kHz>
azalia0: recording: max channels=4, encodings=1<PCM>
azalia0: recording: PCM formats=60160<20bit,16bit,96kHz,48kHz,44.1kHz>
audio0 at azalia0: full duplex, independent
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: Tsunami product 0x1166, rev 1.10/2.70, addr 2, iclass 3/1
ums0 at uhidev0: 5 buttons and Z dir.
wsmouse0 at ums0 mux 0
atapibus0 at atabus0: 2 targets
pciide0:0:0: lost interrupt
        type: ata tc_bcount: 512 tc_skip: 0
cd0 at atapibus0 drive 0: <CD-540E, , 1.0A> cdrom removable
pciide0:0:0: lost interrupt
        type: ata tc_bcount: 512 tc_skip: 0
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0 at atabus3 drive 0: <WDC WD2500AAJS-61B4A0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)