Port-i386 archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: Sensors on Asus P2B-F?
At 4:54 Uhr -0800 03.11.2009, Paul Goyette wrote:
I have just fixed the piixpm code to set the bus type field. This
will enable the I2C_SCAN code to actually work. Can you grab rev
1.30 of src/sys/dev/pci/piixpm.c and rebuild and try again?
I really doubt that what you have on this motherboard is a real lm
chip, based on its strange behavior.
...better. A lot better.
# mbmon -d -A
Summary of Detection:
* SMB monitor(s)[IntelPIIX4(440BX/MX)]:
** Asus Chip AS99127F found at slave address: 0x5A.
# mbmon
Temp.= 32.0, 28.0, 0.0; Rot.= 3341, 0, 0
Vcore = 2.06, 2.51; Volt. = 3.65, 5.05, 11.86, -12.82, -5.14
^C
# envstat
Current CritMax CritMin CritCap Unit
[lm0]
VCore A: 2.064 V
VCore B: 2.512 V
+3.3V: 3.648 V
+5V: 5.053 V
+12V: 11.856 V
-12V: -11.237 V
-5V: -5.153 V
Temp0: 32.000 degC
Temp1: 0.000 degC
Temp2: 0.000 degC
Fan0: 3341 RPM
Fan1: N/A
Fan2: N/A
#
-- Note that Temp1 is missing, but the rest of the values match the
mbmon output.
dmesg has
Nov 3 15:37:33 Riffel /netbsd: piixpm0: 24-bit timer
Nov 3 15:37:33 Riffel /netbsd: piixpm0: interrupting at SMI, polling
Nov 3 15:37:33 Riffel /netbsd: iic0 at piixpm0: I2C bus
Nov 3 15:37:33 Riffel /netbsd: iic0: devices at 0x09 0x2d
Nov 3 15:37:33 Riffel /netbsd: lm_probe: rv = 1, cr = 1
Nov 3 15:37:33 Riffel /netbsd: lm0 at iic0 addr 0x2d
Nov 3 15:37:33 Riffel /netbsd: wb_match: winbond vend id 0x12c3
Nov 3 15:37:33 Riffel /netbsd: wb_match: winbond chip id 0x31
Nov 3 15:37:33 Riffel /netbsd: lm0: Winbond AS99127F Hardware monitor
now. I noted that taking out the DEBUG* options keeps the kernel from
recognizing the device?
hauke
--
The ASCII Ribbon Campaign Hauke Fath
() No HTML/RTF in email Institut für Nachrichtentechnik
/\ No Word docs in email TU Darmstadt
Respect for open standards Ruf +49-6151-16-3281
Home |
Main Index |
Thread Index |
Old Index