Toggling Alix2c LEDs

[Hubert Feyrer <hubert%feyrer.de@localhost>]

For the record (archive):

I've found that the three LEDs at the front of a PC Engines Alix2C 
board[1] can be toggled on and off via their attachment to the GPIO bus.
Here are the commands for this:

left:   gpioctl -d /dev/gpio 6 2
middle: gpioctl -d /dev/gpio 25 2
right:  gpioctl -d /dev/gpio 27 2

I'll leave it to you to make some use out of this. 8-)


 - Hubert

[1] http://www.pcengines.ch/alix.htm