problems with ACPI and touchpad

["Skorobogatko Oleksiy" <skorobogatko%meta.ua@localhost>]

Hello!
I try to install 5.0.2, but have problem with ACPI. If ACPI enabled,
keyboard not
working at all. If I disable ACPI keyboard work fine. Below I put dmesg with
enabled ACPI and I aware this message "pckbc: cmd word write error".
Next issue related with touchpad in X11. Each time of moving cursor with
touchpad
it freezes on few seconds if I plug external USB mouse, no freezes occuries.
Any help would be appreciated.

NetBSD 5.0.2 (GENERIC) #0: Sat Feb  6 17:53:27 UTC 2010
        
builds%b7.netbsd.org@localhost:/home/builds/ab/netbsd-5-0-2-RELEASE/i386/201002061851Z-obj/home/builds/ab/netbsd-5-0-2-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 503 MB
avail memory = 483 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
MTC Montara-GML  (FAB-2)
mainbus0 (root)
cpu0 at mainbus0: Intel 686-class, 32MHz, id 0x6d8
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <INSYDE,RSDT_000,00000001>, AslId <_CSI,00010103>
LNKA: ACPI: Found matching pin for 0.2.INTA at func 0: 10
LNKC: ACPI: Found matching pin for 0.31.INTA at func 1: 0
LNKB: ACPI: Found matching pin for 0.31.INTB at func 3: 5
LNKA: ACPI: Found matching pin for 0.29.INTA at func 0: 10
LNKD: ACPI: Found matching pin for 0.29.INTB at func 1: 11
LNKH: ACPI: Found matching pin for 0.29.INTD at func 7: 7
LNKH: BIOS IRQ 7 for 0.29.INTD is invalid
LNKE: ACPI: Found matching pin for 1.2.INTA at func 0: 3
LNKE: BIOS IRQ 3 for 1.2.INTA is invalid
LNKD: ACPI: Found matching pin for 1.1.INTA at func 0: 11
LNKB: ACPI: Found matching pin for 1.3.INTA at func 0: 255
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpibut0 at acpi0 (SBTN, PNP0C0E): ACPI Sleep Button
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibat0 at acpi0 (BAT0, PNP0C0A): ACPI Battery (Control Method)
pckbc1 at acpi0 (PS2M, SYN0C01): aux port
pckbc1: irq 12
pckbc2 at acpi0 (KBC, PNP0303): kbd port
pckbc2: io 0x60,0x64 irq 1
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x43,0x50-0x53 irq 0
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (COPR, PNP0C04)
npx1: io 0xf0 irq 13
npx1: reported by CPUID; using exception 16
FWH (INT0800) at acpi0 not configured
acpiec0 at acpi0 (EC0, PNP0C09): ACPI Embedded Controller
acpiec0: io 0x62,0x66
apm0 at acpi0: Power Management spec V1.2
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pckbc: cmd word write error
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x3580 (rev. 0x02)
agp0 at pchb0: detected 8060k stolen memory
agp0: aperture at 0xb0000000, size 0x8000000
vendor 0x8086 product 0x3584 (miscellaneous system, revision 0x02) at pci0
dev 0 function 1 not configured
vendor 0x8086 product 0x3585 (miscellaneous system, revision 0x02) at pci0
dev 0 function 3 not configured
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x3582 (rev. 0x02)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
vendor 0x8086 product 0x3582 (miscellaneous display, revision 0x02) at
pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x24c2 (rev. 0x03)
uhci0: interrupting at irq 10
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x24c4 (rev. 0x03)
uhci1: interrupting at irq 11
usb1 at uhci1: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x24cd (rev. 0x03)
LNKH: Picked IRQ 5 with weight 2
ehci0: interrupting at irq 5
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
ehci0: reset timeout
ehci0: init failed, error=13
ppb0 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0x83)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
iwi0 at pci1 dev 1 function 0: vendor 0x8086 product 0x4223 (rev. 0x05)
iwi0: interrupting at irq 11
iwi0: 802.11 address 00:16:6f:8e:b7:e4
iwi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps
vr0 at pci1 dev 2 function 0: VIA VT6105 (Rhine III) 10/100 Ethernet
LNKE: Picked IRQ 10 with weight 2
vr0: interrupting at irq 10
vr0: Ethernet address: 00:40:d0:87:28:e2
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0002c6, model 0x0034, rev. 9
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0 at pci1 dev 3 function 0: vendor 0x104c product 0xac50 (rev. 0x02)
cbb0: cacheline 0x0 lattimer 0x80
cbb0: bhlc 0x28000
cbb0: secondary bus number uninitialized; try PCI_BUS_FIXUP
cbb0: interrupting at irq 5
cardslot0 at cbb0
pcmcia0 at cardslot0
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x24cc (rev. 0x03)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
ichlpcib0: SpeedStep enabled
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801DBM IDE Controller (ICH4-M) (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x24c3 (rev. 0x03)
ichsmb0: interrupting at irq 5
iic0 at ichsmb0: I2C bus
auich0 at pci0 dev 31 function 5: i82801DB/DBM (ICH4/ICH4M) AC-97 Audio
auich0: interrupting at irq 5
auich0: ac97: Avance Logic ALC101 codec; Realtek 3D
auich0: ac97: ext id 600<AC97_22,AMAP>
vendor 0x8086 product 0x24c6 (modem communications, revision 0x03) at pci0
dev 31 function 6 not configured
isa0 at ichlpcib0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
audio0 at auich0: full duplex, independent
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
acpiacad0: AC adapter online.
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
wd0 at atabus0 drive 0: <SAMSUNG HM080HC>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488
sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <PHILIPS CD-RW/DVD-ROM SCB5265, , TX08> cdrom
removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

-- 
(\_/)
(O.o)
(> <) This is Bunny. Copy Bunny into your signature to help him on his way
to world domination.