Port-i386 archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: 6.0_BETA boot doesn't complete
For reference, here's what happens when booting a Dell PowerEdge R710
from the i386 5.1.2 and 6.0_BETA CDs.
5.1.2 goes through to sysinst without intervention but 6.0_BETA stops
at the `root device:' prompt. Answering cd0a to that question
makes it go as far as the `init path (default /sbin/init):' prompt
where it stops again but just hitting the Enter key gets it through
to sysinst.
Two 300 GB SAS disks (ST3300657SS) attached to the R710's PERC H200I
RAID controller aren't detected so NetBSD must be lacking a driver
for them, the install kernel anyway.
Ray
Booting from the i386 5.1.2 CD
==============================
Welcome to the NetBSD 5.1.2 boot-only install CD
===============================================================================
This CD contains only the install kernels. Binary sets to complete the
installation must be downloaded separately.
ACPI should work on all modern and legacy hardware, however if you have
problems, please try disabling it.
If you encounter problems on hardware manufactured after 1998 with ACPI
enabled, please file a problem report including output from the 'dmesg'
command.
1. Install NetBSD
2. Install NetBSD (no ACPI)
3. Install NetBSD (no ACPI, no SMP)
4. Drop to boot prompt
Choose an option; RETURN for default; SPACE to stop countdown.
Option 1 will be chosen in 0 seconds.
booting cd0a:netbsd
10090076+518916+618576 [521184+509293]=0xbb2988
Loading /miniroot.kmod
WARNING: skipping large memory map entry: 0x100000000/0xb40000000/0x1
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.1.2 (GENERIC) #0: Thu Feb 2 17:22:10 UTC 2012
builds%b6.netbsd.org@localhost:/home/builds/ab/netbsd-5-1-2-RELEASE/i386/201202021012Z-obj/home/builds/ab/netbsd-5-1-2-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 3059 MB
avail memory = 2989 MB
Dell Inc. PowerEdge R710
mainbus0 (root)
cpu0 at mainbus0 apid
32/home/builds/ab/netbsd-5-1-2-RELEASE/src/sys/arch/x86/x86/mtrr_i686.c:
FIXME: more than 8 MTRRs
: Intel 686-class, 2793MHz, id 0x206c2
cpu1 at mainbus0 apid 0: Intel 686-class, 2793MHz, id 0x206c2
cpu2 at mainbus0 apid 34: Intel 686-class, 2793MHz, id 0x206c2
cpu3 at mainbus0 apid 2: Intel 686-class, 2793MHz, id 0x206c2
cpu4 at mainbus0 apid 36: Intel 686-class, 2793MHz, id 0x206c2
cpu5 at mainbus0 apid 4: Intel 686-class, 2793MHz, id 0x206c2
cpu6 at mainbus0 apid 48: Intel 686-class, 2793MHz, id 0x206c2
cpu7 at mainbus0 apid 16: Intel 686-class, 2793MHz, id 0x206c2
cpu8 at mainbus0 apid 50: Intel 686-class, 2793MHz, id 0x206c2
cpu9 at mainbus0 apid 18: Intel 686-class, 2793MHz, id 0x206c2
cpu10 at mainbus0 apid 52: Intel 686-class, 2793MHz, id 0x206c2
cpu11 at mainbus0 apid 20: Intel 686-class, 2793MHz, id 0x206c2
cpu12 at mainbus0 apid 33: Intel 686-class, 2793MHz, id 0x206c2
cpu13 at mainbus0 apid 1: Intel 686-class, 2793MHz, id 0x206c2
cpu14 at mainbus0 apid 35: Intel 686-class, 2793MHz, id 0x206c2
cpu15 at mainbus0 apid 3: Intel 686-class, 2793MHz, id 0x206c2
cpu16 at mainbus0 apid 37: Intel 686-class, 2793MHz, id 0x206c2
cpu17 at mainbus0 apid 5: Intel 686-class, 2793MHz, id 0x206c2
cpu18 at mainbus0 apid 49: Intel 686-class, 2793MHz, id 0x206c2
cpu19 at mainbus0 apid 17: Intel 686-class, 2793MHz, id 0x206c2
cpu20 at mainbus0 apid 51: Intel 686-class, 2793MHz, id 0x206c2
cpu21 at mainbus0 apid 19: Intel 686-class, 2793MHz, id 0x206c2
cpu22 at mainbus0 apid 53: Intel 686-class, 2793MHz, id 0x206c2
cpu23 at mainbus0 apid 21: Intel 686-class, 2793MHz, id 0x206c2
ioapic0 at mainbus0 apid 0
ioapic1 at mainbus0 apid 1
acpi0 at mainbus0: Intel ACPICA 20080321
npx1 at acpi0 (FPU, PNP0C04): io 0xf0-0xff irq 13
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x5f irq 0
COMA (PNP0501) at acpi0 not configured
COMB (PNP0501) at acpi0 not configured
hpet0 at acpi0 (HPET, PNP0103-0): mem 0xfed00000-0xfed003ff
apm0 at acpi0: Power Management spec V1.2
ipmi0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x3406 (rev. 0x13)
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x3408 (rev. 0x13)
ppb0: unsupported PCI Express version
pci1 at ppb0 bus 1
bnx0 at pci1 dev 0 function 0: Broadcom NetXtreme II BCM5709 1000Base-T
bnx0: Ethernet address d0:67:e5:ef:a3:e1
bnx0: interrupting at ioapic1 pin 4
brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bnx1 at pci1 dev 0 function 1: Broadcom NetXtreme II BCM5709 1000Base-T
bnx1: Ethernet address d0:67:e5:ef:a3:e3
bnx1: interrupting at ioapic1 pin 16
brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ppb1 at pci0 dev 3 function 0: vendor 0x8086 product 0x340a (rev. 0x13)
ppb1: unsupported PCI Express version
pci2 at ppb1 bus 2
bnx2 at pci2 dev 0 function 0: Broadcom NetXtreme II BCM5709 1000Base-T
bnx2: Ethernet address d0:67:e5:ef:a3:e5
bnx2: interrupting at ioapic1 pin 0
brgphy2 at bnx2 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bnx3 at pci2 dev 0 function 1: Broadcom NetXtreme II BCM5709 1000Base-T
bnx3: Ethernet address d0:67:e5:ef:a3:e7
bnx3: interrupting at ioapic1 pin 10
brgphy3 at bnx3 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ppb2 at pci0 dev 4 function 0: vendor 0x8086 product 0x340b (rev. 0x13)
ppb2: unsupported PCI Express version
pci3 at ppb2 bus 3
vendor 0x1000 product 0x0072 (SAS mass storage, revision 0x03) at
pci3 dev 0 function 0 not configured
ppb3 at pci0 dev 5 function 0: vendor 0x8086 product 0x340c (rev. 0x13)
ppb3: unsupported PCI Express version
pci4 at ppb3 bus 4
ppb4 at pci0 dev 6 function 0: vendor 0x8086 product 0x340d (rev. 0x13)
ppb4: unsupported PCI Express version
pci5 at ppb4 bus 5
ppb5 at pci5 dev 0 function 0: vendor 0x111d product 0x8061 (rev. 0x01)
ppb5: unsupported PCI Express version
pci6 at ppb5 bus 6
ppb6 at pci6 dev 2 function 0: vendor 0x111d product 0x8061 (rev. 0x01)
ppb6: unsupported PCI Express version
pci7 at ppb6 bus 7
bnx4 at pci7 dev 0 function 0: Broadcom NetXtreme II BCM5709 1000Base-T
bnx4: Ethernet address 00:10:18:c5:ad:f0
bnx4: interrupting at ioapic1 pin 13
brgphy4 at bnx4 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
brgphy4: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bnx5 at pci7 dev 0 function 1: Broadcom NetXtreme II BCM5709 1000Base-T
bnx5: Ethernet address 00:10:18:c5:ad:f2
bnx5: interrupting at ioapic1 pin 15
brgphy5 at bnx5 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
brgphy5: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ppb7 at pci6 dev 4 function 0: vendor 0x111d product 0x8061 (rev. 0x01)
ppb7: unsupported PCI Express version
pci8 at ppb7 bus 8
bnx6 at pci8 dev 0 function 0: Broadcom NetXtreme II BCM5709 1000Base-T
bnx6: Ethernet address 00:10:18:c5:ad:f4
bnx6: interrupting at ioapic1 pin 3
brgphy6 at bnx6 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
brgphy6: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bnx7 at pci8 dev 0 function 1: Broadcom NetXtreme II BCM5709 1000Base-T
bnx7: Ethernet address 00:10:18:c5:ad:f6
bnx7: interrupting at ioapic1 pin 14
brgphy7 at bnx7 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
brgphy7: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ppb8 at pci0 dev 7 function 0: vendor 0x8086 product 0x340e (rev. 0x13)
ppb8: unsupported PCI Express version
pci9 at ppb8 bus 9
ppb9 at pci0 dev 9 function 0: vendor 0x8086 product 0x3410 (rev. 0x13)
ppb9: unsupported PCI Express version
pci10 at ppb9 bus 10
vendor 0x8086 product 0x342e (interrupt system, revision 0x13) at
pci0 dev 20 function 0 not configured
vendor 0x8086 product 0x3422 (interrupt system, revision 0x13) at
pci0 dev 20 function 1 not configured
vendor 0x8086 product 0x3423 (interrupt system, revision 0x13) at
pci0 dev 20 function 2 not configured
uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2937 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 17
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2938 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 18
usb1 at uhci1: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x293c (rev. 0x02)
ehci0: interrupting at ioapic0 pin 19
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
uhci2 at pci0 dev 29 function 0: vendor 0x8086 product 0x2934 (rev. 0x02)
uhci2: interrupting at ioapic0 pin 21
usb3 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 1: vendor 0x8086 product 0x2935 (rev. 0x02)
uhci3: interrupting at ioapic0 pin 20
usb4 at uhci3: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x293a (rev. 0x02)
ehci1: interrupting at ioapic0 pin 21
ehci1: companion controllers, 2 ports each: uhci2 uhci3
usb5 at ehci1: USB revision 2.0
ppb10 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0x92)
pci11 at ppb10 bus 11
vga1 at pci11 dev 3 function 0: vendor 0x102b product 0x0532 (rev. 0x0a)
wsdisplay0 at vga1 kbdmux 1
drm at vga1 not configured
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x2918 (rev. 0x02)
ichlpcib0: 24-bit timer
piixide0 at pci0 dev 31 function 2
piixide0: Intel 82801I Serial ATA Controller (ICH9) (rev. 0x02)
piixide0: using ioapic0 pin 23 for native-PCI interrupt
atabus0 at piixide0 channel 0
atabus1 at piixide0 channel 1
isa0 at ichlpcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
attimer1: attached to pcppi0
uhub0 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4 at usb2: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub5 at usb5: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub6 at uhub4 port 3: vendor 0x0424 product 0x2514, class 9/0, rev
2.00/0.00, addr 2
uhub6: multiple transaction translators
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: Avocent USB Composite Device-0, rev 1.10/0.00, addr 2, iclass 3/1
ukbd0 at uhidev0
uhidev1 at uhub6 port 1 configuration 1 interface 0
uhidev1: Microsoft Microsoft® Digital Media Keyboard, rev 2.00/1.43,
addr 3, iclass 3/1
ukbd1 at uhidev1
wskbd0 at ukbd0 mux 1
uhidev2 at uhub1 port 2 configuration 1 interface 1
uhidev2: Avocent USB Composite Device-0, rev 1.10/0.00, addr 2, iclass 3/1
ums0 at uhidev2: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
wskbd1 at ukbd1 mux 1
uhidev3 at uhub6 port 1 configuration 1 interface 1
uhidev3: Microsoft Microsoft® Digital Media Keyboard, rev 2.00/1.43,
addr 3, iclass 3/0
uhidev3: 3 report ids
uhid0 at uhidev3 reportid 1: input=7, output=0, feature=0
uhid1 at uhidev3 reportid 3: input=1, output=0, feature=0
uhidev4 at uhub6 port 2 configuration 1 interface 0
uhidev4: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), rev
1.10/3.00, addr 4, iclass 3/1
ums1 at uhidev4: 3 buttons and Z dir
wsmouse1 at ums1 mux 0
umass0 at uhub6 port 4 configuration 1 interface 0
umass0: Generic Mass Storage Device, rev 2.00/1.05, addr 5
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Single, Flash Reader, 1.00> disk removable
sd0: fabricating a geometry
sd0: 972 MB, 972 cyl, 64 head, 32 sec, 512 bytes/sect x 1990656 sectors
sd0: fabricating a geometry
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <TEAC DVD-ROM DV-28SW, 11080820095845,
R.2B> cdrom removable
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture
boot device: <unknown>
root on md0a dumps on md0b
root file system type: ffs
WARNING: clock gained 51 days
WARNING: CHECK AND RESET THE DATE!
warning: no /dev/console
Created tmpfs /dev (1458176 byte, 2816 inodes)
erase ^?, werase ^W, kill ^U, intr ^C
Welcome to sysinst, the NetBSD-5.1.2 system installation tool. This
menu-driven tool is designed to help you install NetBSD to a hard disk, or
upgrade an existing NetBSD system, with a minimum of work.
In the following menus type the reference letter (a, b, c, ...) to select an
item, or type CTRL+N/CTRL+P to select the next/previous item.
The arrow keys and Page-up/Page-down may also work.
Activate the current selection from the menu by typing the enter key.
+---------------------------------------------+
¦>a: Installation messages in English ¦
¦ b: Messages d'installation en français ¦
¦ c: Installation auf Deutsch ¦
¦ d: Komunikaty instalacyjne w jezyku polskim ¦
¦ e: Mensajes de instalación en castellano ¦
+---------------------------------------------+
<- Dropped into shell here
# df -h
Filesystem Size Used Avail %Cap Mounted on
/dev/md0a 4.8M 2.0M 2.9M 41% /
tmpfs 1.4M 356K 1.0M 25% /dev
#
The machine was then shutdown using the `e: Halt the system' option
in sysinst's menu:
syncing disks... done
unmounting file systems... done
The operating system has halted.
Please press any key to reboot.
Booting from the i386 6.0_BETA CD
=================================
NetBSD/x86 BIOS Boot, Revision 5.9 (from NetBSD 6.0_BETA)
Memory: 634/3131840 k
boot
11686192+564132+483896 [595984+584948]=0xd47a10
Loading /stand/i386/6.0/modules/cd9660/cd9660.kmod
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 6.0_BETA (GENERIC)
total memory = 3059 MB
avail memory = 2995 MB
mainbus0 (root)
cpu0 at mainbus0 apid 32: Intel(R) Xeon(R) CPU X5660 @
2.80GHz, id 0x206c2
cpu1 at mainbus0 apid 0: Intel(R) Xeon(R) CPU X5660 @
2.80GHz, id 0x206c2
cpu2 at mainbus0 apid 34: Intel(R) Xeon(R) CPU X5660 @
2.80GHz, id 0x206c2
cpu3 at mainbus0 apid 2: Intel(R) Xeon(R) CPU X5660 @
2.80GHz, id 0x206c2
cpu4 at mainbus0 apid 36: Intel(R) Xeon(R) CPU X5660 @
2.80GHz, id 0x206c2
cpu5 at mainbus0 apid 4: Intel(R) Xeon(R) CPU X5660 @
2.80GHz, id 0x206c2
cpu6 at mainbus0 apid 48: Intel(R) Xeon(R) CPU X5660 @
2.80GHz, id 0x206c2
cpu7 at mainbus0 apid 16: Intel(R) Xeon(R) CPU X5660 @
2.80GHz, id 0x206c2
cpu8 at mainbus0 apid 50: Intel(R) Xeon(R) CPU X5660 @
2.80GHz, id 0x206c2
cpu9 at mainbus0 apid 18: Intel(R) Xeon(R) CPU X5660 @
2.80GHz, id 0x206c2
cpu10 at mainbus0 apid 52: Intel(R) Xeon(R) CPU X5660 @
2.80GHz, id 0x206c2
cpu11 at mainbus0 apid 20: Intel(R) Xeon(R) CPU X5660 @
2.80GHz, id 0x206c2
cpu12 at mainbus0 apid 33: Intel(R) Xeon(R) CPU X5660 @
2.80GHz, id 0x206c2
cpu13 at mainbus0 apid 1: Intel(R) Xeon(R) CPU X5660 @
2.80GHz, id 0x206c2
cpu14 at mainbus0 apid 35: Intel(R) Xeon(R) CPU X5660 @
2.80GHz, id 0x206c2
cpu15 at mainbus0 apid 3: Intel(R) Xeon(R) CPU X5660 @
2.80GHz, id 0x206c2
cpu16 at mainbus0 apid 37: Intel(R) Xeon(R) CPU X5660 @
2.80GHz, id 0x206c2
cpu17 at mainbus0 apid 5: Intel(R) Xeon(R) CPU X5660 @
2.80GHz, id 0x206c2
cpu18 at mainbus0 apid 49: Intel(R) Xeon(R) CPU X5660 @
2.80GHz, id 0x206c2
cpu19 at mainbus0 apid 17: Intel(R) Xeon(R) CPU X5660 @
2.80GHz, id 0x206c2
cpu20 at mainbus0 apid 51: Intel(R) Xeon(R) CPU X5660 @
2.80GHz, id 0x206c2
cpu21 at mainbus0 apid 19: Intel(R) Xeon(R) CPU X5660 @
2.80GHz, id 0x206c2
cpu22 at mainbus0 apid 53: Intel(R) Xeon(R) CPU X5660 @
2.80GHz, id 0x206c2
cpu23 at mainbus0 apid 21: Intel(R) Xeon(R) CPU X5660 @
2.80GHz, id 0x206c2
ioapic0 at mainbus0 apid 0
ioapic1 at mainbus0 apid 1
acpi0 at mainbus0: Intel ACPICA 20110623
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
WHEA (PNP0C33) at acpi0 not configured
PMI0 (ACPI000D) at acpi0 not configured
npx1 at acpi0 (FPU, PNP0C04): io 0xf0-0xff irq 13
SPK (PNP0C01) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x5f irq 0
COMA (PNP0501) at acpi0 not configured
COMB (PNP0501) at acpi0 not configured
MBIO (PNP0C01) at acpi0 not configured
NIPM (IPI0001) at acpi0 not configured
PEHB (PNP0C02) at acpi0 not configured
VTD (PNP0C02) at acpi0 not configured
apm0 at acpi0: Power Management spec V1.2
ipmi0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x3406 (rev. 0x13)
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x3408 (rev. 0x13)
ppb0: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci1 at ppb0 bus 1
bnx0 at pci1 dev 0 function 0: Broadcom NetXtreme II BCM5709 1000Base-T
bnx0: Ethernet address d0:67:e5:ef:a3:e1
bnx0: interrupting at ioapic1 pin 4
brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bnx1 at pci1 dev 0 function 1: Broadcom NetXtreme II BCM5709 1000Base-T
bnx1: Ethernet address d0:67:e5:ef:a3:e3
bnx1: interrupting at ioapic1 pin 16
brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ppb1 at pci0 dev 3 function 0: vendor 0x8086 product 0x340a (rev. 0x13)
ppb1: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 2
bnx2 at pci2 dev 0 function 0: Broadcom NetXtreme II BCM5709 1000Base-T
bnx2: Ethernet address d0:67:e5:ef:a3:e5
bnx2: interrupting at ioapic1 pin 0
brgphy2 at bnx2 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bnx3 at pci2 dev 0 function 1: Broadcom NetXtreme II BCM5709 1000Base-T
bnx3: Ethernet address d0:67:e5:ef:a3:e7
bnx3: interrupting at ioapic1 pin 10
brgphy3 at bnx3 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ppb2 at pci0 dev 4 function 0: vendor 0x8086 product 0x340b (rev. 0x13)
ppb2: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci3 at ppb2 bus 3
vendor 0x1000 product 0x0072 (SAS mass storage, revision 0x03) at
pci3 dev 0 function 0 not configured
ppb3 at pci0 dev 5 function 0: vendor 0x8086 product 0x340c (rev. 0x13)
ppb3: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci4 at ppb3 bus 4
ppb4 at pci0 dev 6 function 0: vendor 0x8086 product 0x340d (rev. 0x13)
ppb4: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci5 at ppb4 bus 5
ppb5 at pci5 dev 0 function 0: vendor 0x111d product 0x8061 (rev. 0x01)
ppb5: PCI Express 2.0 <Upstream Port of PCI-E Switch>
pci6 at ppb5 bus 6
ppb6 at pci6 dev 2 function 0: vendor 0x111d product 0x8061 (rev. 0x01)
ppb6: PCI Express 2.0 <Downstream Port of PCI-E Switch>
pci7 at ppb6 bus 7
bnx4 at pci7 dev 0 function 0: Broadcom NetXtreme II BCM5709 1000Base-T
bnx4: Ethernet address 00:10:18:c5:ad:f0
bnx4: interrupting at ioapic1 pin 13
brgphy4 at bnx4 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
brgphy4: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bnx5 at pci7 dev 0 function 1: Broadcom NetXtreme II BCM5709 1000Base-T
bnx5: Ethernet address 00:10:18:c5:ad:f2
bnx5: interrupting at ioapic1 pin 15
brgphy5 at bnx5 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
brgphy5: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ppb7 at pci6 dev 4 function 0: vendor 0x111d product 0x8061 (rev. 0x01)
ppb7: PCI Express 2.0 <Downstream Port of PCI-E Switch>
pci8 at ppb7 bus 8
bnx6 at pci8 dev 0 function 0: Broadcom NetXtreme II BCM5709 1000Base-T
bnx6: Ethernet address 00:10:18:c5:ad:f4
bnx6: interrupting at ioapic1 pin 3
brgphy6 at bnx6 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
brgphy6: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bnx7 at pci8 dev 0 function 1: Broadcom NetXtreme II BCM5709 1000Base-T
bnx7: Ethernet address 00:10:18:c5:ad:f6
bnx7: interrupting at ioapic1 pin 14
brgphy7 at bnx7 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
brgphy7: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ppb8 at pci0 dev 7 function 0: vendor 0x8086 product 0x340e (rev. 0x13)
ppb8: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci9 at ppb8 bus 9
ppb9 at pci0 dev 9 function 0: vendor 0x8086 product 0x3410 (rev. 0x13)
ppb9: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci10 at ppb9 bus 10
vendor 0x8086 product 0x342e (interrupt system, revision 0x13) at
pci0 dev 20 function 0 not configured
vendor 0x8086 product 0x3422 (interrupt system, revision 0x13) at
pci0 dev 20 function 1 not configured
vendor 0x8086 product 0x3423 (interrupt system, revision 0x13) at
pci0 dev 20 function 2 not configured
uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2937 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 17
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2938 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 18
usb1 at uhci1: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x293c (rev. 0x02)
ehci0: interrupting at ioapic0 pin 19
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
uhci2 at pci0 dev 29 function 0: vendor 0x8086 product 0x2934 (rev. 0x02)
uhci2: interrupting at ioapic0 pin 21
usb3 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 1: vendor 0x8086 product 0x2935 (rev. 0x02)
uhci3: interrupting at ioapic0 pin 20
usb4 at uhci3: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x293a (rev. 0x02)
ehci1: interrupting at ioapic0 pin 21
ehci1: companion controllers, 2 ports each: uhci2 uhci3
usb5 at ehci1: USB revision 2.0
ppb10 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0x92)
pci11 at ppb10 bus 11
vga1 at pci11 dev 3 function 0: vendor 0x102b product 0x0532 (rev. 0x0a)
wsdisplay0 at vga1 kbdmux 1
drm at vga1 not configured
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x2918 (rev. 0x02)
ichlpcib0: 24-bit timer
gpio0 at ichlpcib0: 64 pins
piixide0 at pci0 dev 31 function 2: Intel 82801I Serial ATA
Controller (ICH9) (rev. 0x02)
piixide0: using ioapic0 pin 23 for native-PCI interrupt
atabus0 at piixide0 channel 0
atabus1 at piixide0 channel 1
isa0 at ichlpcib0
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: device 0x0000104a rev 0x4e
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution
acpicpu2 at cpu2: ACPI CPU
coretemp2 at cpu2: thermal sensor, 1 C resolution
acpicpu3 at cpu3: ACPI CPU
coretemp3 at cpu3: thermal sensor, 1 C resolution
acpicpu4 at cpu4: ACPI CPU
coretemp4 at cpu4: thermal sensor, 1 C resolution
acpicpu5 at cpu5: ACPI CPU
coretemp5 at cpu5: thermal sensor, 1 C resolution
acpicpu6 at cpu6: ACPI CPU
coretemp6 at cpu6: thermal sensor, 1 C resolution
acpicpu7 at cpu7: ACPI CPU
coretemp7 at cpu7: thermal sensor, 1 C resolution
acpicpu8 at cpu8: ACPI CPU
coretemp8 at cpu8: thermal sensor, 1 C resolution
acpicpu9 at cpu9: ACPI CPU
coretemp9 at cpu9: thermal sensor, 1 C resolution
acpicpu10 at cpu10: ACPI CPU
coretemp10 at cpu10: thermal sensor, 1 C resolution
acpicpu11 at cpu11: ACPI CPU
coretemp11 at cpu11: thermal sensor, 1 C resolution
acpicpu12 at cpu12: ACPI CPU
acpicpu13 at cpu13: ACPI CPU
acpicpu14 at cpu14: ACPI CPU
acpicpu15 at cpu15: ACPI CPU
acpicpu16 at cpu16: ACPI CPU
acpicpu17 at cpu17: ACPI CPU
acpicpu18 at cpu18: ACPI CPU
acpicpu19 at cpu19: ACPI CPU
acpicpu20 at cpu20: ACPI CPU
acpicpu21 at cpu21: ACPI CPU
acpicpu22 at cpu22: ACPI CPU
acpicpu23 at cpu23: ACPI CPU
uhub0 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1 at usb2: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3 at usb5: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
ehci1: handing over full speed device on port 2 to uhci2
uhub6 at uhub1 port 3: vendor 0x0424 product 0x2514, class 9/0, rev
2.00/0.00, addr 2
uhub6: multiple transaction translators
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: Avocent USB Composite Device-0, rev 1.10/0.00, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd0 at ukbd0 mux 1
uhidev1 at uhub0 port 2 configuration 1 interface 1
uhidev2 at uhub6 port 1 configuration 1 interface 0
uhidev1: Avocent USB Composite Device-0, rev 1.10/0.00, addr 2, iclass 3/1
uhidev2: Microsoft Microsoft® Digital Media Keyboard, rev 2.00/1.43,
addr 3, iclass 3/1
ums0 at uhidev1: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
ukbd1 at uhidev2: 8 modifier keys, 6 key codes
wskbd1 at ukbd1 mux 1
uhidev3 at uhub6 port 1 configuration 1 interface 1
uhidev3: Microsoft Microsoft® Digital Media Keyboard, rev 2.00/1.43,
addr 3, iclass 3/0
uhidev3: 3 report ids
uhid0 at uhidev3 reportid 1: input=7, output=0, feature=0
uhid1 at uhidev3 reportid 3: input=1, output=0, feature=0
uhidev4 at uhub6 port 2 configuration 1 interface 0
uhidev4: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), rev
1.10/3.00, addr 4, iclass 3/1
ums1 at uhidev4: 3 buttons and Z dir
wsmouse1 at ums1 mux 0
umass0 at uhub6 port 4 configuration 1 interface 0
umass0: Generic Mass Storage Device, rev 2.00/1.05, addr 5
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Single, Flash Reader, 1.00> disk removable
sd0: fabricating a geometry
sd0: 972 MB, 972 cyl, 64 head, 32 sec, 512 bytes/sect x 1990656 sectors
sd0: fabricating a geometry
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <TEAC DVD-ROM DV-28SW, 11080820095845,
R.2B> cdrom removable
boot device: <unknown>
root device: <- Boot process stopped here
root device: cd0a
dump device (default cd0b):
file system (default generic):
root on cd0a dumps on cd0b
ipmi0: warning over limit on 'Temp6'
root file system type: cd9660
warning: no /dev/console
init path (default /sbin/init):
init: trying /sbin/init
Created tmpfs /dev (1540096 byte, 2976 inodes)
You are using a serial console, we do not know your terminal emulation.
Please select one, typical values are:
vt100
ansi
xterm
Terminal type (just hit ENTER for 'vt220'):
<- Dropped into shell here
# df -h
Filesystem Size Used Avail %Cap Mounted on
root_device 44M 44M 0B 100% /
tmpfs 1.5M 456K 1.0M 30% /dev
tmpfs 2.9G 8.0K 2.9G 0% /tmp
tmpfs 2.9G 8.0K 2.9G 0% /var
tmpfs 2.9G 4.0K 2.9G 0% /etc
#
The machine was then shutdown using the `e: Halt the system' option
in sysinst's menu:
syncing disks... done
brgphy7: detached
brgphy6: detached
brgphy5: detached
brgphy4: detached
sd0: detached
bnx7: detached
bnx6: detached
bnx5: detached
bnx4: detached
scsibus0: detached
pci8: detached
pci7: detached
ppb7: detached
ppb6: detached
cd0: detached
sysbeep0: detached
midi0: detached
pci6: detached
brgphy3: detached
brgphy2: detached
brgphy1: detached
brgphy0: detached
atapibus0: detached
pcppi0: detached
com1: detached
ppb5: detached
bnx3: detached
bnx2: detached
bnx1: detached
bnx0: detached
atabus1: detached
atabus0: detached
gpio0: detached
pci10: detached
pci9: detached
pci5: detached
pci4: detached
pci3: detached
pci2: detached
pci1: detached
ppb9: detached
ppb8: detached
ppb4: detached
ppb3: detached
ppb2: detached
ppb1: detached
ppb0: detached
pchb0: detached
attimer1: detached
The operating system has halted.
Please press any key to reboot.
Home |
Main Index |
Thread Index |
Old Index