RE: shutdown drops into db{0} on Digital PC 3000

[Raymond Phillips <r.phillips%uq.edu.au@localhost>]

>Hmm, do you get any uhci related error messages during boot?
>Something like: "uhci0: init failed, error = ..."?

There are two uhci0 lines.  Here's dmesg's output:

NetBSD 6.0.1 (GENERIC)
total memory = 191 MB
avail memory = 175 MB
mainbus0 (root)
cpu0 at mainbus0: Intel 686-class, 267MHz, id 0x634
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x7180 (rev. 0x03)
agp0 at pchb0: aperture at 0xfe800000, size 0x400000
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x7181 (rev. 0x03)
pci1 at ppb0 bus 1
pcib0 at pci0 dev 7 function 0: vendor 0x8086 product 0x7110 (rev. 0x02)
piixide0 at pci0 dev 7 function 1: Intel 82371AB IDE controller (PIIX4) (rev. 
0x01)
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 7 function 2: vendor 0x8086 product 0x7112 (rev. 0x01)
pci_intr_map: no mapping for pin D (line=ff)
uhci0: couldn't map interrupt
piixpm0 at pci0 dev 7 function 3: vendor 0x8086 product 0x7113 (rev. 0x02)
piixpm0: 24-bit timer
piixpm0: interrupting at SMI, polling
iic0 at piixpm0: I2C bus
vga1 at pci0 dev 9 function 0: vendor 0x102b product 0x051a (rev. 0x03)
wsdisplay0 at vga1 kbdmux 1
drm at vga1 not configured
ex0 at pci0 dev 18 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt (rev. 
0x78)
ex0: interrupting at irq 9
ex0: MAC address 00:01:03:44:f4:7d
exphy0 at ex0 phy 24: 3Com internal media interface
exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
attimer0 at isa0 port 0x40-0x43
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279
npx0 at isa0 port 0xf0-0xff
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
attimer0: attached to pcppi0
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
wd0 at atabus0 drive 0
wd0: <ST340016A>
wd0: 38166 MB, 77545 cyl, 16 head, 63 sec, 512 bytes/sect x 78165360 sectors
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <ATAPI-CD ROM-DRIVE-52MAX, , Ver 52B> cdrom removable
boot device: wd0
root on wd0a dumps on wd0b
/: replaying log to memory
root file system type: ffs
Sun Mar 17 02:18:16 EST 2013
Starting root file system check:
/dev/rwd0a: file system is journaled; not checking
/: replaying log to disk
swapctl: setting dump device to /dev/wd0b
swapctl: adding /dev/wd0b as swap device at priority 0
Starting file system checks:
Setting tty flags.
Setting sysctl variables:
ddb.onpanic: 1 -> 0
Starting network.
Hostname: tt7
route: writing to routing socket: File exists
IPv6 mode: host
Configuring network interfaces: ex0.
Adding interface aliases:.
Building databases: dev, utmp, utmpx.
Starting syslogd.
Setting date via ntp.
Mounting all filesystems...
Clearing temporary files.
Creating a.out runtime link editor directory cache.
Checking quotas: done.
Loaded entropy from disk.
swapctl: setting dump device to /dev/wd0b
Starting virecover.
Checking for core dump...
savecore: no core dump
Starting local daemons:.
Add: not found
Starting arpwatch...
Updating motd.
Starting ntpd.
Starting powerd.
Starting sshd.
Starting inetd.
Starting cron.
Sun Mar 17 02:18:50 EST 2013

NetBSD/i386 (tt7) (console)

login: