Hello, all.
I've added some changes for Intel Haswell processor and Intel
8 Series Chipset.
usr.sbin/cpuctl/arch/i386.c:
Add/update some processor family name from the document.
sys/arch/x86/include/cpuinfo.h:
Add some cache and TLB information from the document.
What other modification should we do for processor itself?
For devices:
sys/dev/pci/pcidevs
Add some devices for new chipset's devices from the document.
x86/pci/ichlpcib.c
Add some entries for new chipset's devices from the document
to support some timers.
sys/dev/pci/pucdata.c
Add KT (Serial over LAN) from the document.
and wm(4) support (I217)
The following dmesg is from my Intel DQ87PG motherboard using
amd64/conf/GENERIC.
I know this ML is not port-amd64 but port-i386 :)
We can see some error and warning messages.
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 6.99.23 (GENERIC) #8: Wed Jul 17 12:08:29 JST 2013
msaitoh%amd64.xxx.yyy@localhost:/var/sources/NetBSD-current/src/sys/arch/amd64/compile/GENERIC
total memory = 16037 MB
avail memory = 15555 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
(
)
mainbus0 (root)
ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating
length 268 to 244 (20110623/tbfadt-320)
ACPI warning.
cpu0 at mainbus0 apid 0: Intel(R) Core(TM) i5-4430S CPU @ 2.70GHz, id 0x306c3
cpu1 at mainbus0 apid 2: Intel(R) Core(TM) i5-4430S CPU @ 2.70GHz, id 0x306c3
cpu2 at mainbus0 apid 4: Intel(R) Core(TM) i5-4430S CPU @ 2.70GHz, id 0x306c3
cpu3 at mainbus0 apid 6: Intel(R) Core(TM) i5-4430S CPU @ 2.70GHz, id 0x306c3
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <INTEL ,DQ87PG ,00000023>, AslId <AMI ,00010013>
mpacpi: PCI bus 3 int routing already done!
Bug of BIOS? (This motherboard's BIOS is the latest version)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (H_EC, PNP0C09-1)acpiec0: unable to evaluate _GPE: AE_NOT_FOUND
?
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
CWDT (INT3F0D) at acpi0 not configured
SIO1 (PNP0C02) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
RMSC (PNP0C02) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
PDRC (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0002): ACPI Display Output Device
acpiout2 at acpivga0 (DD03, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0302): ACPI Display Output Device
acpiout5 at acpivga0 (DD06, 0x0303): ACPI Display Output Device
acpiout6 at acpivga0 (DD07, 0x0304): ACPI Display Output Device
acpiout7 at acpivga0 (DD08, 0x0305): ACPI Display Output Device
acpiout8 at acpivga0 (DD09, 0x0009): ACPI Display Output Device
acpiout9 at acpivga0 (DD0A, 0x000a): ACPI Display Output Device
acpiout10 at acpivga0 (DD0B, 0x000b): ACPI Display Output Device
acpiout11 at acpivga0 (DD0C, 0x000c): ACPI Display Output Device
acpiout12 at acpivga0 (DD0D, 0x000d): ACPI Display Output Device
acpiout13 at acpivga0 (DD0E, 0x000e): ACPI Display Output Device
acpiout14 at acpivga0 (DD0F, 0x000f): ACPI Display Output Device
acpiout15 at acpivga0 (DD1F, 0x0400): ACPI Display Output Device
acpiout15: brightness levels: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45
46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71
72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97
98 99 100
acpivga0: unknown output device acpiout0
acpivga0: unknown output device acpiout1
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: unknown output device acpiout5
acpivga0: unknown output device acpiout6
acpivga0: unknown output device acpiout7
acpivga0: unknown output device acpiout8
acpivga0: unknown output device acpiout9
acpivga0: unknown output device acpiout10
acpivga0: unknown output device acpiout11
acpivga0: unknown output device acpiout12
acpivga0: unknown output device acpiout13
acpivga0: unknown output device acpiout14
acpivga0: connected output devices:
acpivga0: 0x0400 (acpiout15): Unknown Output Device, head 0
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
PTMD (INT3394) at acpi0 not configured
TPM (PNP0C31) at acpi0 not configured
IAOE (INT33A0) at acpi0 not configured
acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan
acpifan2 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan
acpifan3 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan
acpifan4 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan
acpitz0 at acpi0 (TZ00)
acpitz0: active cooling level 0: 86.0C
acpitz0: active cooling level 1: 55.0C
acpitz0: active cooling level 2: 0.0C
acpitz0: active cooling level 3: 0.0C
acpitz0: active cooling level 4: 0.0C
acpitz0: levels: critical 97.0 C
acpitz1 at acpi0 (TZ01): cpu0 cpu1 cpu2 cpu3
acpitz1: levels: critical 97.0 C, passive 100.0 C, passive cooling
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: Intel Haswell Host Bridge, DRAM (rev. 0x06)
vga0 at pci0 dev 2 function 0: Intel product 0x0412 (rev. 0x06)
wsdisplay0 at vga0 kbdmux 1
wsmux1: connecting to wsdisplay0
wskbd0: connecting to wsdisplay0
drm at vga0 not configured
hdaudio0 at pci0 dev 3 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 16
hdaudio0: RIRB timeout
hdaudio0: RIRB timeout
hdaudio0: RIRB timeout
hdaudio0 is configured incorrectly. The document says Haswell CPU which
has graphics internally has new "mini" HD audio, too. I'm not familiar with
hdaudio, so I can't fix this problem.
Intel 8 Series USB xHCI (USB serial bus, interface 0x30, revision 0x04) at pci0
dev 20 function 0 not configured
Intel 8 Series MEI Controller (miscellaneous communications, revision 0x04) at
pci0 dev 22 function 0 not configured
wm0 at pci0 dev 25 function 0: I217 LM Ethernet Connection (rev. 0x04)
wm0: interrupting at ioapic0 pin 20
wm0: PCI-Express bus
wm0: FLASH
wm0: Ethernet address 70:54:d2:c5:25:b0
ihphy0 at wm0 phy 2: i217 10/100/1000 media interface, rev. 4
ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
Currenty, I217 works fine for me. I have to do some work for wm:
EEE support
modify the code for RAL (Receive Addless List)
ehci0 at pci0 dev 26 function 0: Intel 8 Series USB EHCI (rev. 0x04)
ehci0: interrupting at ioapic0 pin 16
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
hdaudio1: interrupting at ioapic0 pin 22
hdafg0 at hdaudio1: Realtek ALC662
hdafg0: DAC00 2ch: Speaker [Jack]
hdafg0: DAC01 2ch: Speaker [Built-In]
hdafg0: DAC02 2ch: HP Out [Jack]
hdafg0: DIG03 2ch: SPDIF Out [Jack]
hdafg0: ADC04 2ch: Line In [Jack], Mic In [Jack]
hdafg0: ADC05 2ch: Mic In [Jack]
hdafg0: 2ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20
PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, independent
ppb0 at pci0 dev 28 function 0: Intel 8 Series PCIE (rev. 0xd4)
ppb0: PCI Express 2.0 <Root Port of PCI-E Root Complex> x1 @ 5.0Gb/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 5: Intel 8 Series PCIE (rev. 0xd4)
ppb1: PCI Express 2.0 <Root Port of PCI-E Root Complex> x1 @ 5.0Gb/s
ppb1: link is x1 @ 2.5Gb/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci2 dev 0 function 0: Integrated Technology Express PCIe-PCI Bridge
(rev. 0x41)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ehci1 at pci0 dev 29 function 0: Intel 8 Series USB EHCI (rev. 0x04)
ehci1: interrupting at ioapic0 pin 23
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
ichlpcib0 at pci0 dev 31 function 0: Intel Q87 LPC (rev. 0x04)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
ahcisata0 at pci0 dev 31 function 2: Intel 8 Series (desktop) SATA Controller
(AHCI) (rev. 0x04)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP
0xc730ff45<EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
Intel 8 Series SMBus Controller (SMBus serial bus, revision 0x04) at pci0 dev
31 function 3 not configured
isa0 at ichlpcib0
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: device 0x0000104a rev 0x4e
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: P0: FFH, lat 10 us, pow 65000 mW, 2701 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 65000 mW, 2700 MHz
acpicpu0: P2: FFH, lat 10 us, pow 61690 mW, 2600 MHz
acpicpu0: P3: FFH, lat 10 us, pow 55260 mW, 2400 MHz
acpicpu0: P4: FFH, lat 10 us, pow 52759 mW, 2300 MHz
acpicpu0: P5: FFH, lat 10 us, pow 49691 mW, 2200 MHz
acpicpu0: P6: FFH, lat 10 us, pow 44347 mW, 2000 MHz
acpicpu0: P7: FFH, lat 10 us, pow 41453 mW, 1900 MHz
acpicpu0: P8: FFH, lat 10 us, pow 35844 mW, 1700 MHz
acpicpu0: P9: FFH, lat 10 us, pow 33706 mW, 1600 MHz
acpicpu0: P10: FFH, lat 10 us, pow 31039 mW, 1500 MHz
acpicpu0: P11: FFH, lat 10 us, pow 26430 mW, 1300 MHz
acpicpu0: P12: FFH, lat 10 us, pow 23928 mW, 1200 MHz
acpicpu0: P13: FFH, lat 10 us, pow 21483 mW, 1100 MHz
acpicpu0: P14: FFH, lat 10 us, pow 17285 mW, 900 MHz
acpicpu0: P15: FFH, lat 10 us, pow 14998 mW, 800 MHz
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution
acpicpu2 at cpu2: ACPI CPU
coretemp2 at cpu2: thermal sensor, 1 C resolution
acpicpu3 at cpu3: ACPI CPU
coretemp3 at cpu3: thermal sensor, 1 C resolution
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ahcisata0 port 0: device present, speed: 6.0Gb/s
wd0 at atabus0 drive 0
wd0: <PLEXTOR PX-128M5S>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 119 GB, 248085 cyl, 16 head, 63 sec, 512 bytes/sect x 250069680 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
(using DMA)
uhub2 at uhub0 port 1: vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04,
addr 2
uhub2: single transaction translator
uhub3 at uhub1 port 1uhub2: 6 ports with 6 removable, self powered
: vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2
uhub3: single transaction translator
uhub3: 8 ports with 8 removable, self powered
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: Darfon USB Optical Mouse, rev 1.10/3.00, addr 3, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
--
-----------------------------------------------
SAITOH Masanobu (msaitoh%execsw.org@localhost
msaitoh%netbsd.org@localhost)
!DSPAM:51e6d496133449820718439!