Subject: Re: IIcx won't boot
To: Ethan Gold <etgold@cs.vassar.edu>
From: Ken Nakata <kenn@eden.rutgers.edu>
List: port-mac68k
Date: 03/23/1996 11:52:28
> get_mapping(): Too many NuBus ranges.
> Non-system RAM (nubus, etc.):
> Log = 0xf9000000, Phys = 0x9000000, Len = 0x1000000 (1048576d)
> .
> .
> .
> no internal video at address 0 -- videoaddr is 0xf9900020.
> Done.
> Bootstrapping the pmap system.
> Failure in BSD boot. nextpa=0x106000, high[0]=0x1000000.
> panic: You're hosed!
>
> Stopped at _Debugger+0x6: unlk a6
> db> unexpected trap; vector offset 0x0 from 0x739c0000.
>
> I thought that perhaps the video and ethernet cards were interfering
> with each other, so I've pulled out the ether, swapped the card positions,
> etc. no luck. I do have mode32 installed and am booting in 1bit video
Sounds like you forgot to turn 32-bit addressing ON.
ken