Subject: Re: A ppp problem solved and another problem found
To: Bill Studenmund <wrstuden@loki.stanford.edu>
From: Jon Lefman <jlefman@bu.edu>
List: port-mac68k
Date: 04/08/1997 22:28:35
Sorry this response is so late. I've been bogged down with school work
lately. I'm still trying to respond.
>I might have misunderstood you before. I thought you were trying to
>set ppp parameters from an stty command.
Sorry I was confusing.
>While ppp is running, try "stty -e -f /dev/tty00" and see what the
>settings are while ppp is up.
>
>The serial drivers will certainly respect CTS going low if crtscts is
>asserted. They will immediately stop sending (any character in
>transmission will of course be finished).
>
>One other question. Are you using the modem initialization string you
>use inder MacOS? The modem string in the non-demand-dial kit is just
>the one MacSlIP was using on my modem. Your modem might need different.
I'm using the same initialization string for MacPPP and ppp-up on BSD.
It's at&f1&c1&d2&k3
&f1: Set factory settings 1, just basic stuff is set.
&c1: Set's carrier detect low when disconnected, up when connected
&d2: When dtr drops, the connection drops. I've tried &d0, but that
doesn't affect when I send through ftp and pppd still continues to send
after FC has gone low.
&k3: Use hardware flow control
Here's what happens when I do "stty -e -f /dev/tty00" when pppd is not
connected:
speed 9600 baud; 0 rows; 0 columns;
lflags: icanon isig iexten echo echoe -echok echoke -echonl echoctl
-echoprt -altwerase -noflsh -tostop -flusho -pendin -nokerninfo
-extproc
iflags: -istrip icrnl -inlcr -igncr ixon -ixoff ixany imaxbel -ignbrk
brkint -inpck -ignpar -parmrk
oflags: opost onlcr oxtabs
cflags: cread cs8 -parenb -parodd hupcl -clocal -cstopb -crtscts -mdmbuf
discard dsusp eof eol eol2 erase intr kill lnext
^O ^Y ^D <undef> <undef> ^? ^C ^U ^V
min quit reprint start status stop susp time werase
1 ^\ ^R ^Q <undef> ^S ^Z 0 ^W
Here's the same thing when pppd is connected:
ppp disc; speed 38400 baud; 0 rows; 0 columns;
lflags: -icanon -isig -iexten -echo -echoe -echok -echoke -echonl
-echoctl -echoprt -altwerase -noflsh -tostop -flusho -pendin
-nokerninfo -extproc
iflags: -istrip -icrnl -inlcr -igncr -ixon -ixoff -ixany -imaxbel ignbrk
-brkint -inpck ignpar -parmrk
oflags: -opost -onlcr -oxtabs
cflags: cread cs8 -parenb -parodd hupcl -clocal -cstopb crtscts -mdmbuf
discard dsusp eof eol eol2 erase intr kill lnext
^O ^Y ^D <undef> <undef> ^? ^C ^U ^V
min quit reprint start status stop susp time werase
1 ^\ ^R ^Q <undef> ^S ^Z 0 ^W
Can you make anything of this?
Thanks a lot for the help,
Jon
jlefman@bu.edu