I'm now telnetted into my Q900 running NetBSD ;-) The ethernet is
working just fine now, on the onboard ethernet. I'm going to test the
NuBus ethernet next and see if I can get that working... since the AAUI
adapter I'm using is for my Powerbook ;-) 

	I've not noticed any problems yet. I'm going to do some heavy SCSI
work to test the external SCSI and just give it a little use. 

	Of course, if anyone has some ideas on getting the ADB and serial
ports working... I'm here to test ;-) Here is some info:

NetBSD 1.3E (TIGER) #0: Sat May  9 13:13:34 EDT 1998
    briggs@tiger:/u/src/sys/arch/mac68k/compile/TIGER
Apple Macintosh Quadra 900  (68040)
cpu: delay factor 266
real mem = 20971520
avail mem = 16502784
using 281 buffers containing 1150976 bytes of memory
mrg: 'Quadra/Centris ROMs' ROM glue, tracing off, debug off, silent traps
mainbus0 (root)
obio0 at mainbus0
adb0 at obio0 (ADB event device)
adb: using IIsi series hardware support
adb: cleanup: (length=0x2):  0xff  0x03
adb: no devices found
adb: ADBReInit complete
asc0 at obio0: Apple Sound Chip
intvid0 at obio0: DAFB: Monitor sense 1.
intvid0: 832 x 624, monochrome
grf0 at intvid0
ite0 at grf0 (minimal console)
sn0 at obio0 address 08:00:07:94:a5:f9
esp0 at obio0 (quick): address 0x890000: NCR53C96, 25MHz, SCSI ID 7
scsibus0 at esp0: 8 targets
sd0 at scsibus0 targ 0 lun 0: <MICROP, 2210-09MZ1001905, HQ30> SCSI2 0/direct fixed
sd0: 1009MB, 2372 cyl, 9 head, 96 sec, 512 bytes/sect x 2067372 sectors
esp1 at obio0 (quick): address 0x890402: NCR53C96, 25MHz, SCSI ID 7
esp1: SCSI bus reset
scsibus1 at esp1: 8 targets
sd1 at scsibus1 targ 2 lun 0: <QUANTUM, LP240S GM240S01X, 6.3> SCSI2 0/direct fixed
sd1: 234MB, 1818 cyl, 4 head, 65 sec, 512 bytes/sect x 479350 sectors
zsc0 at obio0 chip type 0
zsc0 channel 0: d_speed   9600 DCD clk 0 CTS clk 0
zstty0 at zsc0 channel 0
zsc0 channel 1: d_speed   9600 DCD clk 0 CTS clk 0
zstty1 at zsc0 channel 1
nubus0 at mainbus0
nubus0 slot b: QuadraLink (Vendor: ???, Part: ???) not configured
ae0 at nubus0 slot c: MacCon Ethernet, 16KB memory
ae0: Ethernet address 00:00:94:03:a8:ca
fpu0 at mainbus0 (mc68040)
boot device: sd1
root on sd1a dumps on sd1b
root file system type: ffs
uvm_swap: allocated 210 swap buffer headers

	This is over a -current snapshot from early March. Q900 20MB RAM.
Extended Keyboard, ADB II mouse. 

	Whoops... first crash ;-) But, I think it's the same error that
I've seen going around the list.

panic: malloc: out of space in kmem_map

	Unfortunately I can't do a trace, for obvious reasons...

	Anyways, thanks to Allen Briggs!

	Ryan
	

-----
HELO... my name is rewt... you have SIGKILLed my father... prepare to vi!