Subject: RE: IPFilter Config; client configuration
To: Paul Goyette <port-mac68k@netbsd.org>
From: David Guynn <dguynn@geocities.com>
List: port-mac68k
Date: 11/01/1998 11:29:48
Huh???
How do I set up the ipf -e?

--DAVE

> -----Original Message-----
> From: Paul Goyette [mailto:paul@whooppee.com]
> Sent: Sunday, November 01, 1998 11:27 AM
> To: David Guynn
> Cc: port-i386@netbsd.org; port-mac68k@netbsd.org
> Subject: RE: IPFilter Config; client configuration
>
>
> Try running ftp in Passive mode...
> Also, make sure you do an ipf -E to enable ipfilter and ipnat (not
> obvious, but ipnat is "related" to ipfilter).
>
> On Sun, 1 Nov 1998, David Guynn wrote:
>
> >
> > My ipnat.conf is set up:
> >
> > map ppp0 192.168.4.0/24 -> 0.0.0.0/32 portmap tcp/udp 10000:40000
> >
> > What else do I need?
> >
> >
> > -Dave
> > > -----Original Message-----
> > > From: port-i386-owner@netbsd.org [mailto:port-i386-owner@netbsd.org]On
> > > Behalf Of Paul Goyette
> > > Sent: Sunday, November 01, 1998 10:31 AM
> > > To: David Guynn
> > > Cc: port-mac68k@netbsd.org; port-i386@netbsd.org
> > > Subject: Re: IPFilter Config; client configuration
> > >
> > >
> > > The problem is not on your Mac!
> > >
> > > The problem is that the ftp destination host, ftp.gmd.de,
> does not know
> > > how to get back to your Mac's address 192.168.4.3
> > >
> > > Unfortunately, there is really no way to "teach" ftp.gmd.de
> how to reach
> > > the Mac, since it's address is in RFC1918 "unroutable" (aka private)
> > > address space.
> > >
> > > So, you'll need to configure ipnat on the PC so that whenever
> it gets a
> > > packet from 192.168.4.3 it translates that into the PC's
> registered PPP
> > > address.  Then, ftp.gmd.de will know how to get back to your PC, and
> > > your PC's ipnat will forward the packets back to the Mac.
> > >
> > > On Sun, 1 Nov 1998, David Guynn wrote:
> > >
> > > > Okay, i'm back.
> > > >
> > > > My network looks like:
> > > >
> > > > 	PPP Host
> > > >         |
> > > > 	  |
> > > > 	NetBSD/i386 ---crossover cable--- NetBSD/mac68k
> > > > 	192.168.4.2					192.168.4.3
> > > >
> > > > I can telnet and ftp between the two hosts. I can ping
> > > 192.168.4.3 and vice
> > > > versa.
> > > > I set up 192.168.4.2 to IPF the mac68k to PPP. So I did a
> experiment:
> > > >
> > > >
> > > > MAC68k /etc/rc.conf
> > > >
> > > > DEFAULTROUTE="192.168.4.2"
> > > >
> > > >
> > > > So on the i386 I try to ftp ftp.gmd.de and the same on the mac.
> > > It comes up
> > > > on the pc but not on the mac. So how do I configure the mac?
> > > >
> > > > --DAVE
> > > >
> > > >
> > >
> > > ------------------------------------------------------------------
> > > -----------
> > > | Paul Goyette      | PGP DSS Key fingerprint:   | E-mail
> > > addresses:        |
> > > | Network Engineer  |   BCD7 5301 9513 58A6 0DBC |
> > > paul@whooppee.com       |
> > > | and kernel hacker |   91EB ADB1 A280 3B79 9221 |
> > > paul.goyette@ascend.com |
> > > ------------------------------------------------------------------
> > > -----------
> > >
> >
>
> ------------------------------------------------------------------
> -----------
> | Paul Goyette      | PGP DSS Key fingerprint:   | E-mail
> addresses:        |
> | Network Engineer  |   BCD7 5301 9513 58A6 0DBC |
> paul@whooppee.com       |
> | and kernel hacker |   91EB ADB1 A280 3B79 9221 |
> paul.goyette@ascend.com |
> ------------------------------------------------------------------
> -----------
>