Colin Wood <cwood@ichips.intel.com> wrote:
>netbsd@kunk.jriver.com wrote:
>> Just a note,
>>
>> I've been using the Apple Com slot card with the SONIC chipset on my
>> LC575 with 68040 and kernel 1.3.3-104 (device = sn0). It works GREAT if I let
>> the computer boot with extensions enabled (including the ethernet).
>>
>> However if I boot with extensions disabled, the kernel panics upon
>> "configuring network interfaces" with a bus error. I can provide more
>> dump info if it's useful.
>
>a trace from the debugger might be useful, actually...


Ok, here it is ...

Configuring network interfaces: sn0trap type 0, code =0xc5, v=0x7e400a
 kernel program counter = 0x116a80
Kernel: bus error trap
pid=36 pc=0x116a80 sfc=1 dfc=1

Registers (skipped)

panic: bus error
Stopped in ifconfig at _debugger+0x6 unlk a6
db: trace
_debugger(2204,0,3bc4c64,2f6f8,3bc4c50) + 6
_panic(13f544,2204,20,2204,2200)+52
_trap(0,c5,7e400a)+23c
_sninit(4ce000,e,80c121b3,7eb618,2004)+96
_snioctl(4ce02c,8020690c,514000)+74
_in_ifinit(4ce02c,514000,3bc4ecc,0,0)+154
_in_control(532000,8040691a,3bc4ebc,4ce02c,7eb618)+4d6
_udp_usrreq(532000,b,8040691a,3bc4ebc,4ce92c)+32
_if_ioctl(532000,8040691a,3bc4ebc,7eb618,0)+2c8
_soo_ioctl(7fc048,8040691a,3bc4ebc,7eb618)+c8
_sys_ioctl(7eb618,3bc4f88,3bc4f80)+212
_syscall(36)+14c
_trap0()+e


I tried it twice and the trace sequence was the same. It doesn't matter
if the ethernet cable is plugged in or not...

Bob
- 
Robert E. Brose II    N0QBJ
http://www.jriver.com/~bob/
bob@kunk.jriver.com