Hi, i am trying to burn CD on Quadra 840AV.
I use cdrecord-1.6.1 on 1.4 ,compiling is successful.
But I type command "cdrecord" , reply scsi errors bellow.


bash-2.03# cdrecord -v speed=1 dev=/dev/rcd1c:5,0 -dummy test.raw
Cdrecord release 1.6.1 Copyright (C) 1995-1998 J$B‹S(Jg Schilling
TOC Type: 1 = CD-ROM
scsidev: '/dev/rcd1c:5,0'
devname: '/dev/rcd1c'
scsibus: 0 target: 5 lun: 0
atapi: 0
Device type    : Removable CD-ROM
Version        : 2
Response Format: 2
Capabilities   : RELADR SYNC LINKED
Vendor_info    : 'TEAC    '
Identifikation : 'CD-R55S         '
Revision       : '1.0J'
Device seems to be: Teac CD-R50S.
Using driver for Teac CD-R50S, Teac CD-R55S, JVC XR-W2010, Pinnacle RCD-5020 (te
ac_cdr50).
Driver flags   : SWABAUDIO
Track 01: data    4 MB
Total size:       4 MB (00:27.56) = 2067 sectors
Lout start:       4 MB (00:29/42) = 2067 sectors
Current Secsize: 2048
Blocks total: 286291 Blocks current: 286291 Blocks remaining: 284224
cdrecord: Input/output error. mode select g0: scsi sendcmd: retryable error
CDB:  15 10 00 00 08 00
status: 0x0 (GOOD STATUS)
resid: 8
cmd finished after 0.016s timeout 40s
cdrecord: Cannot set speed/dummy.
bash-2.03# cdrecord: faio_wait_on_buffer for writer timed out.

kernel is netbsd-1.4.1-qsc from puma.
I also try another kernels I can get , same error occured.
Does anyone success cdrecord ?


/////////////////////////////

      Kazunori Miura
       at mount zao
incoming kazumio@st.rim.or.jp
    outgoing kazu@zao.or.jp

//////////////////////////////