> After accidently doing-in the picture tube, I need to run my SE/30
> without its usual power unit.  Would anyone know what the voltages and
> current ratings are for the "J12" power connector on the SE/30's
> motherboard?
> 
> [Here's my best ASCIIfication of the connector if it helps.]
> 
>               .----------------------.  
>              1| [] /\ /\ [] [] /\ /\ | 7
>              8| /\ [] [] /\ /\ [] [] |14 
>               `----------==----------'  
> 
> --
> Chris Baird,, <cjb@brushtail.apana.org.au>


Here you are, with your _nice_ ASCIIfication connector to describe.  :-)

                .----------------------.  
               1| [] /\ /\ [] [] /\ /\ | 7
               8| /\ [] [] /\ /\ [] [] |14 
                `----------==----------'  


pin  1 - 5  GND
pin  6      -5V
pin  7     -12V
pin  8      GND
pin  9     Video
pin 10    Horizontal
pin 11    Vertical
pin 12      +5V
pin 13      +5V
pin 14     +12V

And you can use TTL monitor for PC with your SE/30 as external monitor
if you have or you'd be able to get it, by just connecting Video, H.,
and V. signals through couple of Hex Invertors(HC04) to monitor's
counterparts.  I think I have circuit fig. somewhere here, so will send
it to you if you need.

  -- kaz-k