Subject: NetBSD/Mac68k Installer 1.1g: Error on SCSIRead() #5
To: None <port-mac68k@netbsd.org>
From: Michel BOUDRY <mboudry@club-internet.fr>
List: port-mac68k
Date: 05/08/2000 15:52:35
HELP ME : PB with installation with NetBSD/Mac68k Installer


****************************************************************

PROBLEM is installation with NetBSD/Mac68k Installer

****************************************************************


=46rench user

Mac since 85

Linux since 2 months


LC 475 replaced LC68040 by real 68040

36 k RAM

HD Fireball 4 G

MacOs F1 7.6.1


Good wiev of this text with Mishawaka (O different from z=E9ro)


After reading NETBSD INSTALL.html (several times, with a pen and
paper)


HD SCSI internal, HDT 1.8 to create Swap (90,6M) ,Root file system
(324,5M) and Usr file system (671,5M)

Nor Swap, nor Root, nor Usr, are read only. (no automount, no readonly,
no password)


Partition FIVE (see SCSIRead() #5 error) in HDT is A/UX Root Slice O=20
Apple_Unix_SVR2; 332 256K=20

=2E.....(but different if it is according to the increase number (of bytes
?)....FireBall 1 Giga Apple_HFS 1 000 000K ????)


*****

HDT


Partition map      Apple_partition_map   50k

                   FWB Driver Component  512K

Driver             Apple D driver 43     60K

=46ireBall 2 Giga    Apple_HFS             2 096 128K B A

=46ireBall 1 Giga    Apple_HFS             1 000 000K B A

A/UX Swap Slice 1  Apple_Unix_SVR2       92 752K

A/UX Root Slice O  Apple_Unix_SVR2       332 256K

A/UX Usr Slice O   Apple_Unix_SVR2       687 649K

*****



Two Mac partition in HFS (1G and 2G)

NetBSD 1.4 on CD

Swap (no mksf formated), Root(mkfs formated),User (mkfs formated)


MKFS 1.47

BOOTER 1.11.4

NetBSD/Mac68K Installer 1.1g


No problem to partition , to format in Linux, HD

No problem to found on the CD base.tgz and other tgz

No problem to found NETBSD-GENERICSBC (created 160699) and
NETBSD-GENERIC (created 160699);

 and NetBSD_GENERICSBC26 (on the Net)

 and netsbd (on the Net ftp created 180300)



****************************************************************

PROBLEM is NetBSD/Mac68k Installer

****************************************************************



Launch from the Mac Partition, after selectionning the FIREBALL at SCSI
0 (FB visible)=20

He said

*****

sd0 at scsiID 0

Partition read SCSI ID 0

Mounting partition 'A' as /

Sd0a: Root 'Root file system' at 6379005 size 664512

Sd0g: Usr 'Usr file system' at 7043517 size 1375299

Sd0b: Swap 'Swap' at 6193501 size 185504

Sd0d: Other (FWB DRIVER COMPONENTS) ' FWB Driver Components' at 101
size 1024

Sd0e: HFS_PART 'MacOS' at 1245 size 4192256

SdOf: HFS_PART 'MacOS' at 4193501 size 2000000

Error on SCSIRead( ) #5

=46ailed mountfs( ), error 22.

Error mounting root.

mount root : Undefined error : 0

*****



AFTER choosing SCSI ID 0 and OK, on the screen NetBSB/mac68k
Installation utility, No posibility to use Command M, Command I,
Command D, Command H or Command Q,=20

Quit ONLY with carriage return

Quit with MacOS error 1


No change with 20 000 m=E9ga for NetBSD/Mac68k Installer



QUESTION :


Is my NetBSD/Mac68K Installer 1.1g not compatible with the other used
software ?

Where can I found the RIGHT ONE ?





NB :

With this configuration

If I boot with NetBSD_GENERICSBC (created 160699) and BOOTER
1.11.4<bold>,

</bold>I have

*****

System RAM : 37748736

bytes in 9216 pages.

Low =3D 0x0, High =3D 0x2400000

On-board video at ADDR 0x51900080 (phys 0xf9000080), 1en 0xfff80.

[preserving 359940 bytes of netbsd a.out symbol table]

Copyright C 1996, 1997, 1998, 1999

 The NetBSD Foundation, Inc.

Copyright C 1982, 1989, 1991, 1993

 The Regent of University of California

NetBSD 1.4 (GENERICSBC) #0: Sat May 8 20:55:03 PDT 1999

root 2@c610:/usr/src/sys/arch/mac68k/compile/GENERICSBC

Apple macintosh LC475 (68040)


cpu delay factor =3D 264

total mem =3D 37748736

avail mem =3D 31637504 using 486 buffer containing 1990656 bytes of
memory

mrg 'Quadra/Centris 605 ROMS' ROM glue tracing off debug off silent
traps

mrg  I/O map kludge for ROMS that use hardware address dircetly

mainbus0 (root)

obio0 at mainbus0

adb0 at obio0 (direct, Cuda) : 2 targets

aed0 at adb0 addr0 : ADB Event device

kbd0 at adb0 addr2 : Keyboard II (ISO layout)

ms0 at adb0 addr3 : 1_button, 100 dpi mouse

asc0 at obio0 : Apple sound chip

intvid0 at ibio0 @ 9000080: DAFB video subsystem, monitor sense0

intvid0 : 832x624 monochrome

grf0 at invid0

ite0 at grf0 (minimal console)

iwm0 at obio : Apple GCR floppy disk controler

iwm : Chip revision not supported (-77)

esp0 at obio0 (quick) address 0x891000 : NCR53C96, 16Mhz,SCSI ID7

scsibus0 at esp0 : 8 targets, 8 luns per target

sd0 at scsibus0 targ0 lun0 <<QUANTUM FIREBALL SE 4.3S, PJOA> SCSI2
O/direct fixed

sd0 : 4110MB, 7637 cyl, 4 head, 275 sec, 512 bytes/secteur x8418816
sectors

cd0 at scsibus0 targ3 lun0 :<<SONY, CD ROM, CDU-8003A, 1.9a> SCSI2 5/cd
rom removable

zsc0 at ibio0 chip type0

zsc0 channel0: d_speed 9600 DCD clk0 CTS clk0

zstty0 at zsc0 channel0

zsc0 channel1: d_speed 9600 DCD clk0 CTS clk0

zstty1 at zsc0 channel1

nubus0 at mainbus0

ae0 at nubus0 slot e: MacCon LC -A, 32Kb memory

ae0 : Ethernet address 00:00:94:6b:d7:Oe

fpu0 at mainbus0 (me68040)

boot device: sd0

root on sd0a dumps on sdOb

PRAM : Ox3916d19a, macos_bootime : 0x3916d18a

WARNING: file system time earlier than 1975

--CHECK AND RESET THE DATE!

root file system type : ffs

warning : no /dev/console

init : not found

panic : no init

stopped in swapper at _Debugger+Ox6 : unlk a6

db

db

db

*****

<fontfamily><param>Geneva</param><bigger><bigger>all copied by HAND



Thanks for your attention, and your help






</bigger></bigger></fontfamily>

Michel BOUDRY

mailto:mboudry@club-internet.fr